Enantiopure Chiral Macrocyclic Lanthanide Complexes Derived from (R)-2,2′-Diamino-1,1′-binaphthyl and 2,6-Diformylpyridine

The template condensation of (R)-2,2′-diamino-1,1′-binaphthyl and 2,6-diformylpyridine leads to lanthanide(III) complexes of the new chiral hexaaza macrocycle L that adopts highly twisted conformation in [LnL](NO₃)₃ complexes. The complexes have been characterised by ESI MS spectrometry and NMR spectroscopy. The analogous N₂O₄ chiral crown ether L2 that has the same carbon skeleton as L does not exhibit tendency to bind lanthanide(III) ions. The X-ray crystal structure of L2 exhibit squeezed conformation of the macrocycle and spatial disposition of donor atoms that does not predispose it for coordination of lanthanide(III) ions.     

Low temperature crystal and molecular structure of nitrobenzene

The crystal and molecular structure of nitrobenzene was determined at 103 K by X-ray diffraction, yieldingR=0.034 and a highly precise geometry of the molecule (esds of bond lengths 0.001 Å and bond angles 0.1°). The bond angles in the ring agree very well with additive scheme based on angular substituent parameters. X-X electron density maps support the view that the C-N bond does not exhibit-character, and, hence, the nitro group interacts with the ring mostly by inductive effects.     

Equilibrium interaction of solid surfaces across a polymer melt

Forces across polymer melts are poorly understood despite their importance for adhesion and fabricating composite materials. Using an atomic force microscope (AFM), this interaction was measured for poly(dimethyl siloxane) (PDMS). The structure of the polymer at the surface changed during the first approximately 10 h. Afterward, short-range attractive forces were observed with short-chain PDMS (M(w) = 4200 g/mol). Using PDMS with a molecular weight (M(w) = 18 000 g/mol) above the entanglement limit, we measured a monotonically decaying repulsive force, which indicates that a quasi-immobilized layer had formed at the solid surface. Due to the small radius of curvature of the tip, forces could be measured in equilibrium.     

Synthesis,Spectral and Magnetic Properties,and Crystal Structures of Copper(II) Pyridinecarboxylate Adducts with N‐Heterocyclic Ligands

Synthesis and characterization of seven new complexes [Cu(2‐MeSnic)₂(CH₃OH)]₂ (where 2‐MeSnic is 2‐methylthionicotinate), [Cu(2‐MeSnic)₂L₂]₂ (where L is pyridine — py, ethylnicotinate — Etnic and butylnicotinate — Bunic), [Cu(2‐MeSnic)₂L₂(H₂O)₂] (where L is py and nicotinamide — nia) and [Cu(2‐MeSnic)₂(N‐Menia)₂(H₂O)₂]·2H₂O (where N‐Menia is N‐methylnicotinamide) are reported. The characterization were based on elemental analysis, infrared, electronic and EPR spectra, and magnetic susceptibility measurements over a temperature range of 1.8 — 300 K or 70 — 300 K. Three complexes of different type were studied by X‐ray analysis. The molecule of [Cu(2‐MeSnic)₂(CH₃OH)]₂ has dimeric paddle‐wheel cage structure with a tetragonal pyramidal arrangement around Cu^II. The dimer results from the fact that carboxyl groups of four 2‐MeSnic anions function as bridging in a syn‐syn arrangement. On the other hand [Cu(2‐MeSnic)₂(py)₂]₂ forms dimers with hexacoordinated Cu^II atoms in highly distorted coordination octahedra, each with two oxygen atoms of bridging carboxyl groups in an anti‐anti arrangement of two 2‐MeSnic anions, with two oxygen atoms of one asymmetrically chelating 2‐MeSnic anion and with two nitrogen atoms of two pyridine ligands. The temperature independent EPR spectrum for this complex exhibits an axial signal which corresponds to almost isolated S = ¹/₂ magnetic ions. Magnetic data for the dimer show a weak antiferromagnetic interaction between the two metal ions with J = —0.65 cm^—1. The Cu^II atom in complex [Cu(2‐MeSnic)₂(py)₂(H₂O)₂] is hexacoordinated in an elongated centrosymmetrical tetragonal‐bipyramidal arrangement (4 + 2). Based on the molecular structure the electronic, infrared, electron paramagnetic resonance spectra and magnetic properties are discussed and stereochemistry as well as the mode of ligand coordination in new solid complexes under study have been determined.     

Mass spectra of 2-thioacylaminothiazoles, 2-thioacylaminobenzothiazoles and their ‘fixed structure’ amino and imino tautomeric forms

The fragmentation patterns of the thioacyl derivatives of 2-aminothiazole and 2-aminobenzothiazole and of their ‘fixed structure’ imino and amino tautomeric forms give evidence of the predominance of the imino tautomer in the molecular ions of the trifluorothioacetyl compounds. On the other hand, the M⁺˙ ions of the thioacetyl and thiobenzoyl derivatives are mainly the amino tautomers. A rearrangement with elimination of RCN and formation of the 2-thiazolothione (2-benzothiazolothione) ion is characteristic for ail the compounds investigated. Additional evidence for the interpretation of the main fragmentation paths is provided by the mass spectra of the N-trideuteromethyl and N-deuterated derivatives, high-resolution mass spectrometry being used to determine the elemental composition of some selected peaks.     

Structural characterization of plasmenylcholine photooxidation products

Oxidative damage to plasmenyl-type lipids contributes to decreased membrane barrier function, loss of membrane structure and formation of nonlamellar defects in membrane bilayers. Previous results from this laboratory have shown that membrane-soluble sensitizers (e.g. zinc phthalocyanine and bacteriochlorophyll a) mediate the photooxidation of palmitoyl plasmenylcholine (1-O-alk-1'-Z-enyl-2-palmitoyl-sn-glycero-3-phosphocholine; PPlsC) vesicles with the subsequent creation of lamellar defect structures, vesicle contents leakage and membrane-membrane fusion. Because plasmalogen lipids are significant components of sarcoplasma and myelin membranes, we sought to characterize the products of their photooxidation. This study focuses on the photooxidation of PPlsC vesicles in the presence of the water-soluble sensitizer, aluminum phthalocyanine tetrasulfonate (AlPcS4(4-)). Attack of photogenerated singlet oxygen on the 1-O-alkenyl ether linkage of PPlsC lipids was expected to generate dioxetane- and ene-type photoproducts. The products formed during continuous aerobic irradiation (28 mW/cm2, (610 nm) of PPlsC vesicles in the presence of AlPcS4(4-) were separated via reverse-phase high-performance liquid chromatography (HPLC) with electrochemical detection (ECD) or evaporative light-scattering detection (ELSD). Photooxidized dipalmitoyl-phosphatidylcholine-cholesterol vesicles (control) were used to optimize the HPLC-ECD conditions, using 7 alpha-hydroperoxy-cholesterol as standard. HPLC-ECD was found to be most sensitive for PPlsC hydroperoxides, whereas HPLC-ELSD was more sensitive for nonhydroperoxide photoproducts. The three major photoproducts formed during vesicle irradiation were isolated via preparative HPLC and then characterized by 1H-nuclear magnetic resonance and mass spectrometry. 1-Formyl-2-palmitoyl-sn-glycero-3-phosphocholine and 1-hydroxy-2-palmitoyl-sn-glycero-3-phosphocholine were identified as dioxetane cleavage products that coeluted at approximately 3 min. The second fraction (retention time [RT] = 48 min) was identified as a PPlsC allylic hydroperoxide. The third photoproduct, eluting at RT = 64 min, is tentatively identified as an oxidation product arising from allylic hydroperoxide degradation via Hock rearrangement or free radical decomposition.     

Behavior of evaporating droplets at nonsoluble and soluble surfaces: Modeling with molecular resolution

Liquid droplets in equilibrium with vapor are simulated at solidlike surfaces using the cooperative motion algorithm (CMA). These droplets behave like real droplets, i.e., the densities of the coexistent liquid and vapor phases obey empirical relations such as rho l - rho v proportional, variant (1 - T/Tc)(1/3). Droplet evaporation was studied under various interaction conditions, i.e., nonsoluble and soluble substrates. In the last case, substrate particles migrate toward the liquid-vapor interface to minimize the droplet surface energy. This leads to the formation of a microwell surrounded by a ringlike deposit on the substrate surface. It is shown that the ring formation in the first stages of evaporation results in pinning of the droplet contact area.     

Addition initiated ring closure substituted spiro[4,2]Hepta-1,3-dienes via fulvene intermediates

The reactivity of the epoxy-fulvene 1 with various nucleophiles has been examined. It is a versatile Intermediate for the preparation of spiro[4.2]hepta-1,3-diene synthons via nucleophilic addition to the C₆ position followed by intramolecular cyclization of the substituted cyclopentadiene anion generated in situ.     

Self-assembly of electron donor-acceptor dyads into ordered architectures in two and three dimensions: surface patterning and columnar "double cables"

We report the synthesis and characterization of covalent dyads and multiads of electron acceptors (A) and donors (D), with the purpose of exploiting their nanophase separation behavior toward (a) two-dimensional (2D) surface patterning with well-defined integrated arrays of dissimilar molecular electronic features and (b) bulk self-assembly to noncovalent columnar versions of the so-called "double cable" systems, the likes of which could eventually provide side-by-side percolation pathways for electrons and holes in solar cells. Soluble, alkylated hexa-peri-hexabenzocoronenes (HBCs) bearing tethered anthraquinones (AQs) are shown by scanning tunneling microscopy (STM) to self-assemble at the solution-graphite interface into either defect-rich polycrystalline monolayers or extended 2D crystalline domains, depending on the number of tethered AQs. In the bulk, the thermal stability of the room-temperature HBC columnar phase is increased, which is attributed to the desired nanotriphase separation of HBC columns, insulating alkyl sheaths, and AQ units. Homeotropic alignment (columns normal to surfaces), predicted to be ideal for potential exploitation of such "double cables" in photovoltaic devices, is demonstrated.     

Elucidation of the vicarious nucleophilic substitution of hydrogen mechanism via studies of competition between substitution of hydrogen, deuterium, and fluorine.

Relations of rates of the vicarious nucleophilic substitution of hydrogen (VNS) and S(N)Ar substitution of fluorine in 2-fluoronitrobenzenes with chloroalkyl aryl sulfone carbanions were determined from competitive experiments carried out at various concentrations of base. The observed dependence of the VNS/S(N)Ar rate ratio on the base concentration confirmed the two-step mechanism of the VNS, which consists of reversible formation of sigma(H) adducts of the alpha-chlorocarbanion to nitroarene, followed by base-induced beta-elimination of HCl. It was also evidenced that both of these processes can be the rate-limiting steps: the beta-elimination at low base concentration and the nucleophilic addition at high base concentration. Consistent with that conclusion is the finding that the kinetic isotope effect in the VNS reaction decreases from 4.2 (a value typical of a primary KIE) to 0.8 (a value typical of a secondary KIE) with increasing base concentration. Also reported is our discovery that the S(N)Ar substitution of the 2-fluoronitrobenzenes studied in this work was subject to base catalysis under some of the experimental conditions employed in our competitive experiments.