Fluorescence recovery after photobleaching measurements of polymers in a surface forces apparatus

The surface forces apparatus has been combined with fluorescence recovery after photobleaching to measure translational diffusion of polymer confined between mica sheets. This article presents findings using polydimethylsiloxane with number‐average molecular weight M_n = 2200 g mol^?1, the chains end‐labeled with soluble fluorescent dye. Melts with thickness 10 nm display a translational diffusion coefficient (D) with a bulk component and a slower component assigned to surface diffusion. Reduction of thickness to 1.8 nm causes mobility to split into two populations—an immobile fraction (immobile on the time scale of 30–60 min) and a mobile fraction who's D slow only weakly with diminishing film thickness. However, when load causes the confining mica sheets to flatten, D of the mobile fraction drops by up to an additional order of magnitude, depending on the local pressure that squeezes on the polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Hydrophilic functionalization of syndiotactic polystyrene via a combination of electrophilic bromination and Suzuki–Miyaura reaction

Postfunctionalization of high‐molecular‐weight syndiotactic polystyrene (sPS) was achieved via combination of electrophilic bromination at the para‐position of the polymer aromatic ring and subsequent Suzuki–Miyaura cross‐coupling reactions with functionalized phenylboronic acids. The concentration of brominated styrene repeating unit in sPS was conveniently controlled by changing the ratio of added bromine relative to the polymer repeating unit. Brominated sPS (8.5 mol %) was converted quantitatively to other polar functional groups via Suzuki–Miyaura cross‐coupling reactions with various functional group‐substituted phenylboronic acids. The surface properties of functionalized sPS were studied by measuring water contact angles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4335–4343, 2010     

Monolayer assembly and striped architecture of Co nanoparticles on organic functionalized Si surfaces

We present a new strategy to fabricate a monolayer assembly of Br-terminated Co nanoparticles on functionalized Si surfaces by using chemical covalent bonding and microcontact printing method. Self-assembled monolayers (SAMs) of the Co nanoparticles formed on the hydroxyl-terminated Si surface exhibit two-dimensional island networks with locally ordered arrays via covalent linkage between nanoparticles and surface. On the other hand, SAMs of the nanoparticles on the aminopropyl-terminated Si surface show an individual and random distribution over an entire surface. Furthermore, we have fabricated striped architectures of Co nanoparticles using a combination of microcontact printing and covalent linkage. Microcontact printing of octadecyltrichlorosilane and selective covalent linkage between nanoparticles and functionalized Si surfaces lead to a hybrid nanostructure with selectively assembled nanoparticles stripes on the patterned functionalized Si surfaces. PACS 81.07.Ta; 61.46.+w; 81.16.Dn; 81.16.Be; 68.37.Hk; 82.80.Pv     

Native oxide buried InAlAs ridge waveguide laser diode

InAlAs wet thermal oxidation process was adopted to fabricate ridge waveguide laser diodes. First, applying the oxidation process on the whole etched surface of an InAlAs upper cladding layer, we formed a current blocking and optical confining layer of ridge waveguide laser diode. This is a self-aligned structure, which makes the laser diode fabrication steps much simpler and etching-depth control less important. Assessment of the fabricated laser diode revealed that current-voltage characteristics and slope efficiency did not worsen, and threshold current was reduced by the oxidation process. PACS 85.35.Be; 42.55.Px     

Josephson-vortex-flow terahertz emission in layered high-Tc superconducting single crystals

We report on the successful terahertz emission (0.6-1 THz) that is continuous and tunable in its frequency and power, by driving Josephson vortices in resonance with the collective standing Josephson plasma modes excited in stacked Bi2Sr2CaCu2O8+x intrinsic Josephson junctions. Shapiro-step detection was employed to confirm the terahertz-wave emission. Our results provide a strong feasibility of developing long-sought solid-state terahertz-wave emission devices.     

Frenkel‐Defect‐Mediated Chemical Ordering Transition in a Li–Mn–Ni Spinel Oxide

Using spinel‐type Li(Mn_1.5Ni_0.5)O₄ with two different cations, Mn and Ni, in the oxygen octahedra as a model system, we show that a cation ordering transition takes place through the formation of Frenkel‐type point defects. A series of experimental results based on atomic‐scale observations and in situ powder diffractions along with ab initio calculations consistently support such defect‐mediated transition behavior. In addition to providing a precise suggestion of the intermediate transient states and the resulting kinetic pathway during the transition between two phases, our findings emphasize the significant role of point defects in ordering transformation of complex oxides.     

β-TrCP1 degradation is a novel action mechanism of PI3K/mTOR inhibitors in triple-negative breast cancer cells

An F-box protein, β-TrCP recognizes substrate proteins and destabilizes them through ubiquitin-dependent proteolysis. It regulates the stability of diverse proteins and functions as either a tumor suppressor or an oncogene. Although the regulation by β-TrCP has been widely studied, the regulation of β-TrCP itself is not well understood yet. In this study, we found that the level of β-TrCP1 is downregulated by various protein kinase inhibitors in triple-negative breast cancer (TNBC) cells. A PI3K/mTOR inhibitor PI-103 reduced the level of β-TrCP1 in a wide range of TNBC cells in a proteasome-dependent manner. Concomitantly, the levels of c-Myc and cyclin E were also downregulated by PI-103. PI-103 reduced the phosphorylation of β-TrCP1 prior to its degradation. In addition, knockdown of β-TrCP1 inhibited the proliferation of TNBC cells. We further identified that pharmacological inhibition of mTORC2 was sufficient to reduce the β-TrCP1 and c-Myc levels. These results suggest that mTORC2 regulates the stability of β-TrCP1 in TNBC cells and targeting β-TrCP1 is a potential approach to treat human TNBC.     

Direct Patterning and Biofunctionalization of a Large‐Area Pristine Graphene Sheet

Direct patterning of streptavidin and NIH 3T3 fibroblast cells was successfully achieved over a large‐area pristine graphene sheet on Si/SiO₂ by aryl azide‐based photografting with the conventional UV lithographic technique and surface‐initiated, atom transfer radical polymerization of oligo(ethylene glycol) methacrylate.