Direct contact versus solvent-shared ion pairs in NiCl2 electrolytes monitored by multiplet effects at Ni(II) L edge X-ray absorption

We investigate the local electronic structure in aqueous NiCl2 electrolytes by Ni L edge X-ray absorption spectroscopy. The experimental findings are interpreted in conjunction with multiplet calculations of the electronic structure and the resulting spectral shape. In contrast to the situation in the solid, the electronic structure in the electrolyte reflects the absence of direct contact Ni-Cl ion pairs. We observe a systematic change of the intensity ratio of singlet- and triplet-related spectral features as a function of electrolyte concentration. These changes can be described theoretically by a change in the weight of transition matrix contributions with different symmetries. We interpret these findings as being due to progressive distortions of the local symmetry induced by solvent-shared ion pairs.     

Reaction of Cl with CD4 excited to the second C-D stretching overtone

The effects of vibrational excitation on the Cl+CD(4) reaction are investigated by preparing three nearly isoenergetic vibrational states: mid R:3000 at 6279.66 cm(-1), |2100> at 6534.20 cm(-1), and |1110> at 6764.24 cm(-1), where |D(1)D(2)D(3)D(4)> identifies the number of vibrational quanta in each C-D oscillator. Vibrational excitation of the perdeuteromethane is via direct infrared pumping. The reaction is initiated by photolysis of molecular chlorine at 355 nm. The nascent methyl radical product distribution is measured by 2+1 resonance-enhanced multiphoton ionization at 330 nm. The resulting CD(3) state distributions reveal a preference to remove all energy available in the most excited C-D oscillator. Although the energetics are nearly identical, the authors observe strong mode specificity in which the CD(3) state distributions markedly differ between the three Cl-atom reactions. Reaction with CD(4) prepared in the |3000> mode leads to CD(3) products populated primarily in the ground state, reaction with CD(4) prepared in the |2100> mode leads primarily to CD(3) with one quantum of stretch excitation, and reaction with CD(4) prepared in the |1110> mode leads primarily to CD(3) with one quantum of C-D stretch excitation in two oscillators. There are some minor deviations from this behavior, most notably that the Cl atom is able to abstract more energy than is available in a single C-D oscillator, as in the case of |2100>, wherein a small population of ground-state CD(3) is observed. These exceptions likely result from the mixings between different second overtone stretch combination bands. They also measure isotropic and anisotropic time-of-flight profiles of CD(3) (nu(1)=1,2) products from the Cl+CD(4) |2100> reaction, providing speed distributions, spatial anisotropies, and differential cross sections that indicate that energy introduced as vibrational energy into the system essentially remains as such throughout the course of the reaction.     

Pretilt angle of liquid crystals and liquid-crystal alignment on microgrooved polyimide surfaces fabricated by soft embossing method

In this study, the soft embossing method is proposed to fabricate periodical microgrooved structure on polyimide surfaces. These microgrooved polyimide surfaces are assembled to form liquid-crystal cells. It is found that the director of liquid crystals uniformly aligns along the groove direction even when the groove width is as high as 3 microm. The anchoring energy of these microgrooved polyimide surfaces is higher than that of the typical rubbed surfaces. The pretilt angle of liquid crystals is adjusted by tuning the surface polarity of the polyimide alignment layer, which is identified by the advancing contact angle of water. The surface polarity of polyimide alignment layers is manipulated by simply mixing two kinds of polyimide: a more hydrophilic one and a more hydrophobic one. It is found that the pretilt angle of liquid crystals increases along with the advancing contact angle of water on the alignment layer under the condition of a fixed surface topography.     

Cytotoxic phenylpropanoids and a new triterpene, turformosinic acid, from Turpinia formosana Nakai

One new phenylpropanoid, turformosin A (1), and one new triterpene, turformosinic acid (2), together with 16 known compounds, were isolated from the stems of Turpinia formosana Nakai. All structures were elucidated on the basis of spectroscopic analysis, including 1D- and 2D-NMR techniques and MS analysis. Selected isolated compounds were evaluated for in vitro cytotoxicity against four human cancer cell lines and antioxidant scavenging effects on DPPH. (-)-(7'S,8'S)-threo-carolignan X (3) exhibited cytotoxicity against Hep2, WiDr, Daoy, and MCF-7 cell lines with ED(50) values of 3.60, 4.45, 6.07, and 13.7 μg/mL, respectively. Turformosin A (1), (-)-(7'S,8'S)- threo-carolignan X (3), methoxyhydroquinone-4-β-D-glucopyranoside (5), and methoxy-hydroquinone-1-β-D-glucopyranoside (6), exhibited similar anti-oxidative activity. Hep2 cells treated with 10 μg/mL of 3 showed elevation of sub-G1 population (from 20% at 8 h to 60% at 48 h), and activation of caspase-9/caspase-3/PARP cascade. Compound 3 induced intrinsic apoptotic pathway in Hep2 cells with dose and time dependence (10 μg/mL for 8 h).     

Syntheses of (-)-pelletierine and (-)-homopipecolic acid

Enantiomeric syntheses of (-)-homopipecolic acid and (-)-pelletierine have been achieved by chiral resolution of tropanol followed by Baeyer-Villiger oxidation. The methodology provides a practical route for the synthesis of optically pure piperidines.     

Determining the optimal production policy for a system with imperfect production and shortage

The classic EPQ model assumes that items are produced of perfect quality and no shortage is permitted. In the real world situation, however, due to process deterioration or other factors, the occurrence of imperfect quality items is inevitable. This paper develops an extended economic production quantity (EPQ) model with imperfect production, shortage, and imperfect rework. We assume that the quality scan is conducted during the production. The scanned imperfect items are classified as the repairable and scrap. We consider that not all of the repairable items can be restored to meet the specified quality standard. Only some portion of defective items can be restored as normal items, the other results in defective, due to repair failure, can be sold at a discounted price to a secondary market. The renewal reward theorem is utilized to deal with the variable cycle length. The production quantity and the shortage level are determined in an optimal manner so as to minimize the average system cost. A numerical example is used to demonstrate its practical usage. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and luminescence properties of Y2(WO4)3: Eu3+

A red-emitting Y₂(WO₄)₃: Eu³⁺ phosphor (orthorhombic high temperature phase, anhydride) is prepared by two different methods: the firing of mixtures of constituent oxides and that of precipitates from aqueous solutions. After optimizing preparation conditions, the cathodoluminescence brightness reaches 56% that of Y₂O₂S: Eu³⁺, a commercial red phosphor for color TV. Formation of a high temperature phase below the reported transition temperature is noted in the fired precipitates. This phase occurrence is shown to depend on the treatment of the precipitates to be fired. Reflection difference measurement of Eu-doped and undoped samples assigns an excitation band of about 245 nm to the Eu-O charge transfer band. Different by-products in the two preparation methods are identified by measuring emission spectra under selective excitation. Reversible hydration-dehydration of the phosphor is demonstrated by successively measuring photoluminescence first in vacuum and then in air at various temperatures. No deterioration of luminescence efficiency is observed after repeating this reversible structural change.     

二异丁基锌控制高密度聚乙烯分子量的研究

本文报告了TiCl_4-MgCl_2-AlCl_3/Al(i-Bu)_3-Zn(i-Bu)_2催化体系的乙烯聚合反应中,二异丁基锌对产物分子量和聚合活性的影响。结果表明:在适宜的聚合条件下,二异丁基锌可以有效地控制产物的分子量。     

A Survey of Orbitrap All Ion Fragmentation Analysis Assessed by an R MetaboList Package to Study Small-Molecule Metabolites

Leukemia cell and melanoma tumor tissue extracts were studied for small (mostly m/z?<?250) polar metabolites by LC-ESI-HRMSⁿ analysis powered by a hybrid Quadrupole-Orbitrap. MS data were simultaneously acquired in fast polarity switching mode operating in MS¹ and MS/MS (All Ion Fragmentation, AIF) full-scan analyses at high mass resolution. Positive metabolite assignments were achieved by AIF analysis considering at least two characteristic transitions. Targeted metabolite profiling was achieved by the relative quantification of 18 metabolites through spiking of their respective deuterated counterparts. Manual data processing of MS¹ and AIF scans were compared for the accurate determination of natural metabolites and their deuterated analogs by chromatographic alignment and peak area integration. Evaluation of manual and automated (MetaboList R package) AIF data processing yielded comparable results. The versatility of AIF analysis also enabled the untargeted metabolite profiling of leukemia and melanoma samples in which 22 and 53 compounds were, respectively, identified outside those studied by labeling. The main limitation of this method was that low abundance metabolites with scan rates below 8 scans/peak could not be accurately quantified by AIF analysis. The combination of AIF analysis with MetaboList R package represents an opportunity to move towards automated, faster, and more global metabolomics approaches supported by an entirely flexible open source data processing platform freely available from Comprehensive R Archive Network (CRAN, https://CRAN.R-project.org/package=MetaboList).