Surface enhanced raman and resonance raman spectroscopy in a non-aqueous electrochemical environment: Tris(2,2′-bipyridine)ruthenium(II) adsorbed on silver from acetonitrile

This letter reports the first observation of both surface enhanced Raman scattering (SERS) and surface enhanced resonance Raman scattering (SERRS) from the transition metal complex tris(2,2′-bipyridine)ruthenium (II), Ru(bpy)₃²⁺, adsorbed on a silver electrode from acetonitrile (ACN). The assignment of these spectra as valid examples of SERS and SERRS in a non-aqueous environment is based on the following criteria: (1) in situ demonstration of monolayer surface coverage of Ru(bpy)₃²⁺ using double potential step chronocoulometry (DPSCC); (2) the Raman signals are most intense after surface roughening by anodization; (3) the Raman spectra are potential dependent in the non-faradaic potential region; (4) the measured enhancement factors are greater ilian 10⁶; (5) the surface spectra are frequency shifted relative to their bulk counterpart; and (6) several other molecules also exhibit non-aqueous SERS and SERRS behavior. These results are highly significant in that generality of surface enhanced Raman spectroscopy has been extended into the rich domain of nonaqueous electrochemistry.     

200 W phase-conjugate mirror for CW radiation

We have demonstrated a loop phase-conjugate mirror that has produced up to 200 W phase-conjugate average output power at a 140% reflectivity for a CW input beam at a wavelength of 1.03 μm. A high conjugation fidelity was established by showing that more than 80% of the output beam power was contained within a 1.3-1.7 times diffraction limited beam after double passing a heavily aberrating amplifier chain.     

Small‐angle neutron scattering analysis of bottlebrush backbone and side chain flexibility

Bottlebrush polymers have densely tethered side chains grafted to a linear polymer backbone, resulting in stretching of both the side chains and backbone. Prior studies have reported that the side chains are only weakly stretched while the backbone is highly elongated. Here, scaling laws for the bottlebrush backbone and side chains are determined through small‐angle neutron scattering analysis of a systematic series of poly(lactic acid) bottlebrush polymers synthesized via a “grafting‐through” ring‐opening polymerization. Scattering profiles are modeled with the empirical Guinier–Porod, rigid cylinder, and flexible cylinder models. Side chains are found to be only weakly stretched, with an end‐to‐end distance proportional to N^0.55, while the overall bottlebrush increases in size proportional to N^0.77. These results demonstrate that the bottlebrush backbone is not fully extended and that both side chains and backbone have significant conformational flexibility in solution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 104–111     

Preparation and evaluation of unimolecular pentavalent and hexavalent antigenic constructs targeting prostate and breast cancer: a synthetic route to anticancer vaccine candidates

Several novel, fully synthetic, carbohydrate-based antitumor vaccines have been assembled. Each construct consists of multiple cancer-related antigens displayed on a single polypeptide backbone. Recent advances in synthetic methodology have allowed for the incorporation of a complex oligosaccharide terminating in a sialic acid residue (i.e., GM2) as one of the carbohydrate antigens. Details of the vaccine synthesis as well as the results of preliminary immunological investigations are described herein.     

Modeling acoustic propagation of airgun array pulses recorded on tagged sperm whales (Physeter macrocephalus)

In 2002 and 2003, tagged sperm whales (Physeter macrocephalus) were experimentally exposed to airgun pulses in the Gulf of Mexico, with the tags providing acoustic recordings at measured ranges and depths. Ray trace and parabolic equation (PE) models provided information about sound propagation paths and accurately predicted time of arrival differences between multipath arrivals. With adequate environmental information, a broadband acoustic PE model predicted the relative levels of multipath arrivals recorded on the tagged whales. However, lack of array source signature data limited modeling of absolute received levels. Airguns produce energy primarily below 250 Hz, with spectrum levels about 20-40 dB lower at 1 kHz. Some arrivals recorded near the surface in 2002 had energy predominantly above 500 Hz; a surface duct in the 2002 sound speed profile helps explain this effect, and the beampattern of the source array also indicates an increased proportion of high-frequency sound at near-horizontal launch angles. These findings indicate that airguns sometimes expose animals to measurable sound energy above 250 Hz, and demonstrate the influences of source and environmental parameters on characteristics of received airgun pulses. The study also illustrates that on-axis source levels and simple geometric spreading inadequately describe airgun pulse propagation and the extent of exposure zones.     

Divalent Cd and Pb uptake on calcite {1014} cleavage faces: an XPS and AFM study

The interaction of divalent Cd and Pb with the {101 4} cleavage faces of calcite has been investigated with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Analysis of the {101 4} cleavage planes of calcite was carried out with X-ray photoelectron spectroscopy (XPS) after exposure to divalent metal-bearing solutions in the 0.1-100 microM concentration range for times ranging from 1 to 24 h. The uptake of Cd2+ by calcite was determined to be greater than that of Pb2+ under similar experimental conditions (1 microM, pH 8.2, 24 h exposure time). In both cases, the majority of the divalent metal was postulated to exist in a surface precipitate. AFM results showed that the exposure of calcite to a 1 microM Pb2+ solution resulted in ellipsoidal surface growths that were attributed to the nucleation of a PbCO3 bulk phase. In the Cd circumstance, AFM showed comparatively flat growth features forming on the calcite surface even at concentrations down to 0.1 microM, where the solution would be expected to be undersaturated with respect to Cd bulk phases. These features were attributed to a (Ca,Cd)CO3 solid solution. The individual exposure of these Cd/CaCO3 and Pb/CaCO3 samples to water pre-equilibrated with calcite (metal free) for 1 h led to the removal of no more than 20% of the divalent metal, suggesting that if there was an adsorbed Pb or Cd complex initially on the calcite surface, it was an minority species compared to the precipitate phase. Exposure of calcite to 100 microM Cd and Pb resulted in the accumulation of precipitate on the calcite surface presumably due to the divalent metal initial solution concentrations exceeding the solubility products of CdCO3 and PbCO3, respectively.     

Synthesis of the core structure of acutumine

[reaction: see text] The tricyclic core of the bioactive natural product acutumine has been synthesized. Key steps include an oxidative phenolic coupling to form a masked o-benzoquinone, an anionic oxy-Cope rearrangement to construct an all-carbon quaternary center, and a Michael-type cyclization to form an amine-bearing quaternary carbon. The target compound exists in solution as an enol, in contrast to related compounds that are ketones. A model explaining these observations is presented.     

Formation and photoinduced electron ejection of amminedicyanocuprate(I) and cyano-bridged trinuclear copper(I) complexes in aqueous ammonia solution

UV absorption spectral evidence confirms that a mixed-ligand complex, Cu(CN)(2)(NH(3))(-), is formed in an aqueous solution of KCu(CN)(2) and ammonia. The stepwise stability constant for the reaction, Cu(CN)(2)(-) + NH(3) = Cu(CN)(2)(NH(3))(-), is 2.80 +/- 0.40 in 1 M ionic strength, NaClO(4) medium at 25 degrees C. This amminedicyanocuprate(I) ion readily combines in aqueous solution in a 1:2 and 2:1 molar ratios with Cu(NH(3))(2)(+) to form two trinuclear ionic species, presumably with cyano bridges, with the suggested formulas of Cu(3)(CN)(2)(NH(3))(5)(+) and Cu(3)(CN)(4)(NH(3))(3)(-). The resolved UV absorption spectra of the monomer and two trimers have been determined and exhibit strong bands, presumably metal-ligand charge transfer in nature, in the 200-250-nm region. When solutions of all three complexes absorb a pulse of 266-nm laser light, they photoeject hydrated electrons monophotonically, with quantum yields of 0.41 +/- 0.02, 0.53 +/- 0.02, and 0.50 +/- 0.01 for the monomer, cationic trimer, and anionic trimer, respectively, suggesting that absorption in the charge-transfer-to-solvent bands of these complexes results in an efficient electron ejection process that is enhanced by the existence of a polynuclear structure with cyano bridges. No room-temperature luminescence is observed for these complexes.     

On the synthesis of pure (meth) acrylate esters and their corresponding homopolymers

We have observed that homopolymers of certain (meth)acrylate esters, prepared by the Schotten–Baumann method of (meth)acryloyl chloride and desired alcohol, in the presence of triethylamine or pyridine, formed gels. The mechanism of gelation was investigated and found to be due to a diene impurity, (meth)acrylic anhydride, which cannot be easily separated from many (meth)acrylate esters. For preparation of pure (meth)acrylate esters, the S_N2 displacement reaction of (meth)acrylate anion with the desired chloro compound is recommended. The yields of the two reactions are comparable, and even t-butoxycarbonylmethyl methacrylate is produced in 73% yield by the recommended method.