Kaluza-Klein space and strong gravity

A study of strong gravity theory is carried out in five-dimensional Kaluza-Klein space-time. A relation between the cosmological constant and the radius parameter of the fifth dimension is obtained. The effect of the extra dimension is seen through the generation of masses simulating a Regge-like mass spectrum. It is found that the confinement mechanism is built into the strong gravity formalism. We also discuss the trapping of quarks in the 5D background.     

Analysis of Ti:LiNbO3 zero-gap directional coupler for wavelength division multiplexer/demultiplexer

For the purpose of multichannel integrated-optical wavelength division MUX/DEMUX design, the wavelength tuning method of Ti:LiNbO₃ zero-gap directional coupler is analysed by effective-index based matrix method (EIMM). In this method, first, the 2D refractive index profile of the Ti:LiNbO₃ zero-gap directional coupler is transformed into lateral 1D effective-index profile by WKB method. Finally, matrix method is applied to this effective-index profile and the propagation constants are computed from the resonance peaks of the excitation efficiency versus propagation constant characteristics. It has been shown that the channel wavelength tuning can be achieved by varying the Y-branching angle at the input and output of the device or by a slight variation of two-mode-section length. The method of electro-optic fine tuning of the channel wavelength and channel separation of the device has also been investigated. A cascaded structure with proper parameters for four-channel application is also simulated and the results are presented.     

Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

Microscopic theory of soliton propagation in a mixture of two boson fluid films

A microscopic theory of soliton propagation in a mixture of two boson fluids atT=0°K has been provided.     

Tilt investigation of In(Al,Ga)As metamorphic buffer layers on GaAs (001) substrate: A novel technique for tilt determination

Crystallographic tilt and Surface topography of InGaAs and InAlAs based metamorphic buffer structures on GaAs (001) substrate grown by molecular beam epitaxy (MBE) under varying growth conditions have been investigated. Compressively strained metamorphic buffer layers show anisotropic strain relaxation. A novel tilt determination technique based on X‐ray diffraction has been developed which can separate the effect of anisotropic strain. Tilt has been found to depend on compositional grading scheme, growth temperature and surface irregularities. Samples having random surfaces show smaller tilt than that of samples showing regular cross‐hatch. At higher growth temperature, reduction of tilt has been observed and correlated with thermal activation of otherwise inactive slip systems at low temperature. At low temperature and also for continuously graded samples, reduction of tilt has been observed and correlated with the slower relaxation that provide the opportunity for all the slip systems to participate and compete.     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

Redox-active ionic-liquid-assisted one-step general method for preparing gold nanoparticle thin films: applications in refractive index sensing and catalysis

We describe a general one-step facile method for depositing gold nanoparticle (GNP) thin films onto any type of substrates by the in situ reduction of AuCl(3) using a newly designed redox-active ionic liquid (IL), tetrabutylphosphonium citrate ([TBP][Ci]). Various substrates such as positively charged glass, negatively charged glass/quartz, neutral hydrophobic glass, polypropylene, polystyrene, plain paper, and cellophane paper are successfully coated with a thin film of GNPs. This IL ([TBP][Ci]) is prepared by the simple neutralization of tetrabutylphosphonium hydroxide with citric acid. We also demonstrate that the [TBP][Ci] ionic liquid can be successfully used to generate GNPs in an aqueous colloidal suspension in situ. The deposited GNP thin films on various surfaces are made up of mostly discrete spherical GNPs that are well distributed throughout the film, as confirmed by field-emission scanning electron microscopy. However, it seems that some GNPs are arranged to form arrays depending on the nature of surface. We also characterize these GNP thin films via UV-vis spectroscopy and X-ray diffractometry. The as-formed GNP thin films show excellent stability toward solvent washing. We demonstrate that the thin film of GNPs on a glass/quartz surface can be successfully used as a refractive index (RI) sensor for different polar and nonpolar organic solvents. The as-formed GNP thin films on different surfaces show excellent catalytic activity in the borohydride reduction of p-nitrophenol.     

Improved Performance of an Amperometric Biosensor with Polydiaminonaphthalene on Electrochemically Deposited Au Nanoparticles

The performance of an enzyme sensor fabricated through covalent bond formation on the HRP‐bonded poly(1,8‐diaminonaphthalene) (polyDAN) layer with gold nanoparticles (AuNPs) was applied to catalyze the electrochemical reduction of H₂O₂. The surface characteristics of the sensor probe were studied using cyclic voltammetry, SEM, XPS, QCM, and impedance spectroscopy. The AuNP‐deposited surface resulted in higher conductivity and sensitivity for H₂O₂ detection in phosphate buffer solution. A linear calibration plot was obtained in the H₂O₂ concentration range between 10.0 μM and 25.0 mM with detection limit 5.0±1.25 μM. The lifetime of HRP/polyDAN/AuNP/GC probe was over 70 days without response loss.     

Synthesis in ionic liquids: [Bi2Te2Br](AlCl4), a direct gap semiconductor with a cationic framework

The Lewis acidic ionic liquid EMIMBr-AlCl(3) (EMIM = 1-ethyl-3-methylimidazolium) allows a novel synthetic route to the semiconducting layered metal chalcogenides halide [Bi(2)Te(2)Br](AlCl(4)) and its Sb analogue. [Bi(2)Te(2)Br](AlCl(4)) is a direct band gap, strongly anisotropic semiconductor and consists of cationic infinite layers of [Bi(2)Te(2)Br](+) and [AlCl(4)](-) anions inserted between the layers.     

Volumetric studies of some electrolytes in water and in aqueous sodium dodecylsulfate solutions at different temperatures

Abstract  

The apparent molar volumes (φ _v) of KCl, KNO₃, MgCl₂, and Mg(NO₃)₂ have been determined in water and in aqueous sodium dodecylsulfate solutions from density measurements at 303.15, 308.15, 313.15, 318.15, and 323.15 K. The limiting apparent molar volumes (j_v⁰ \varphi_{v}^{0} ) and experimental slopes (S _v) were derived from the Masson equation. The partial molar volume transfer (\Updelta [`(V)]<sub>\texttr</sub> ) (\Updelta {\bar{V}}_{\text{tr}} ) of the electrolytes were obtained from limiting apparent molar volume data from water to aqueous sodium dodecylsulfate solutions and have been interpreted in terms of ion–ion, hydrophilic–hydrophilic, and hydrophobic–hydrophobic interactions on the basis of a co-sphere overlap model. It is shown that the transfer volumes (\Updelta [`(V)]_\texttr ) (\Updelta {\bar{V}}_{\text{tr}} ) are positive and increase with increasing sodium dodecylsulfate concentration for all electrolytes. The structure making or breaking capacities of the electrolytes have been inferred from the sign of [∂² φ _v⁰/∂T ²]_p, i.e., the second derivative of the limiting apparent molar volume with respect to temperature at constant pressure. In water, KCl and KNO₃ exhibit structure breaking and MgCl₂ and Mg(NO₃)₂ exhibit structure making behavior. All the studied electrolytes were found to act as structure makers in aqueous sodium dodecylsulfate solutions.