Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

OXIDATION OF TiAl,Ni AND Fe IN A DYNAMIC ENVIRONMENTAL SEM

IntroductionInmaterialscience,differentmicrostructuresofthesamematerialsmayinducediversebehaviorsanddifferentcharacteristics.Westwood(1988)showed,asanexample,thatthetreatmentofaluminumsurfacewithcommercialphosphoricacidproducedmechanicallyinterlockedoxide搘hiskers?approximately10nmindiameterand400nminlength,whichmechanicallyinterlocked.Thismicro-structurecankeepsuchaconglomeratebondedoverconsiderablerangesofstressandtemperature.Inahumidatmosphere,especiallythatcontainingchlorine,however,suchox…     

A Novel and Efficient Catalytic System for Aerobic Oxidative Coupling of 2-Naphthol Derivatives

The paper reported a novel and efficient aerobic oxidative coupling reaction of 2-naphthol derivatives catalyzed by CuCu (Ⅰ or Ⅱ)N-alkylimidazole complexes in excellent yields. The crystal structure of CuCu(Ⅱ)N-methylimidazole complex to be determined by X-Ray.     

A polymer onium acting as phase-transfer catalyst in halogen-exchange fluorination promoted by microwave

A polymerized quaternary ammonium salt polydiallyldimethylammonium chloride, exhibiting high stability to heat and base, was prepared and applied as phase-transfer catalyst (PTC) in halogen-exchange (Halex) fluorination of chloronitrobenzenes to give excellent yields of corresponding fluoronitrobenzenes. Dimethyl sulfoxide was found to be the best solvent when microwave was applied as heating resource.     

Structure and reflective properties of Al-Cu-Fe quasicrystalline thin film prepared by laser induced arc method

Al-Cu-Fe thin films were prepared by laser induced arc (laser-arc) method from a single source—Al₆₃Cu₂₅Fe₁₂ alloy, which was proved to consist of quasicrystalline phase together with approximant phase. The composition of the deposited films meets the requirement for formation of icosahedral symmetry phase. Quasicrystalline phase was obtained after annealing the amorphous as-deposit film samples. The optical properties of the samples were investigated. Thin film samples of Al, Cu and Fe deposited under the same condition were employed for comparison. The results showed specific reflective properties of Al-Cu-Fe quasicrystal thin film in some wavelength range. The optical conductivity of the films exhibited a negative peak, centered about 440 nm in range of 190 to 800 nm. The Al-Cu-Fe quasicrystal thin films could absorb almost all the ray in the wavelength range from 420nm to 450 nm. The ratio of absorption was greater than 99%.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.     

Crystal structure of the clathrate of 5,12-dihydro-5,12-o-benzenonaphthacene-1,4-dione with benzene (2:1).

In the crystal of the title compound, the quinone fragment of the host (1) participates in weak D-A interactions with a neighboring naphthalene moiety of 1 and with the guest molecule via fairly short intermolecular face-to-face contacts. An intermolecular electrostatic interaction between a quinone-oxygen atom and a neighboring quinone ring is suggested by short O...C contacts. There exist several C-H...O hydrogen bonds, one of which seems to contribute to the formation of a centrosymmetric dimer of 1.