Physical properties and electrochemical performance of LiMn2O4 cathode materials prepared by a precipitation method

LiMn₂O₄ powder for lithium-ion batteries was prepared by a precipitation method, and the effects of calcination temperature on the physical properties and electrochemical performance of the samples were investigated by various methods. The results of X-ray diffraction (XRD) showed that the lattice parameter (a) and the unit cell volume (v) decrease with the increasing calcination temperature, and the LiMn₂O₄ sample calcined at 750°C has smaller particle size and higher crystallinity than other samples. The results of the electrochemical experiments showed that the sample calcined at 750°C has larger peak currents, higher initial capacity, and better cycling capability, because of its lower charge-transfer resistance and larger diffusion coefficient of Li⁺ ions than those of other samples.     

Morin applied in speciation of aluminium in natural waters and biological samples by reversed-phase high-performance liquid chromatography with fluorescence detection

A reversed-phase high-performance liquid chromatographic method with fluorescence detection for the determination of labile monomeric aluminium has been developed through pre-column complexation using morin as the analytical reagent. The highly fluorescent aluminium-morin complex (excitation wavelength 418 nm, emission wavelength 490 nm) was separated on a Spherisorb ODS 2 column with an eluent consisting of 30% methanol and 70% water (pH 1.0 with perchloric acid). The most remarkable point of this protocol was that only the most toxic aluminium species, that is, free aqua-aluminium ion and its monomeric hydroxo complex ions, selectively respond among various aluminium complexes. This strategy has been successfully applied to direct fractionation of the toxic aluminium in natural waters and biological samples without any pretreatment.     

Tetra‐μ‐acetato‐κ2O:O′‐bis[(4‐phenylpyridine‐κN)copper(II)]

The title compound, [Cu₂(C₂H₃O₂)₄(C₁₁H₉N)₂] or [Cu₂(MeCO₂)₄(phpy)₂] (phpy is 4‐phenyl­pyridine), consists of centrosymmetric dimers in which the Cu^II atoms display a square‐pyramidal CuO₄N coordination, with four acetate O atoms in the basal plane [Cu—O 1.975 (3)–1.987 (3) Å] and the phpy N atom in the apical position [Cu—N 2.150 (3) Å]. The Cu atoms are 2.654 (1) Å apart and are bridged by four acetate groups. The discrete dimers are extended into a three‐dimensional supramolecular array through intermolecular π–π‐stacking interactions.     

LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

Determination of norfloxacin in pharmaceuticals,human serum,and urine using a luminol—dissolved oxygen chemiluminescence system

A sensitive chemiluminescence method, based on the enhancive effect of norfloxacin on the reaction between luminol and dissolved oxygen in a flow injection system, was proposed for the determination of norfloxacin. The increment of the chemiluminiscence intensity was proportional to the concentration of norfloxacin, giving a calibration graph linear over the concentration from 0.4 ng mL⁻¹ to 400.0 ng mL⁻¹ (r ² = 0.9988) with the detection limit of 0.1 ng mL⁻¹ (3 × σ _noise). At the flow rate of 2.0 mL min⁻¹, a complete determination of norfloxacin, including sampling and washing, could be accomplished in 30 s with the relative standard deviation lower than 3.0 %. The proposed method was applied successfully to determine norfloxacin in pharmaceuticals, human urine, and serum. Possible mechanism of the reaction was also discussed.     

Alkyl and aryl substituted corroles. 1. Synthesis and characterization of free base and cobalt containing derivatives. x-ray structure of (Me(4)Ph(5)Cor)Co(py)(2)

The synthesis, spectroscopic properties, and electrochemistry of six different alkyl- and aryl-substituted Co(III) corroles are presented. The investigated compounds contain methyl, ethyl, phenyl, or substituted phenyl groups at the eight beta-positions of the corrole macrocycle and four derivatives also contain a phenyl group at the 10-meso position of the macrocycle. Each cobalt corrole undergoes four reversible oxidations in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate and exists as a dimer in its singly and doubly oxidized forms. The difference in potential between the first two oxidations is associated with the degree of interaction between the two corrole units of the dimer and ranges from an upper value of 0.62 V, in the case of (Me(6)Et(2)Cor)Co, to a lower value of about 0.17 V, in the case of four compounds which have a phenyl group located at the 10-meso position of the macrocycle. These Co(III) corroles strongly coordinate two pyridine molecules or one carbon monoxide molecule in CH(2)Cl(2) media, and ligand binding constants were evaluated using spectroscopic and electrochemical methods. The structure of (Me(4)Ph(5)Cor)Co(py)(2) was also determined by X-ray diffraction. Crystal data: (Me(4)Ph(5)Cor)Co(py)(2).3CH(2)Cl(2).H(2)O, orthorhombic, a = 19.5690(4) A, b = 17.1070(6) A, c = 15.9160(6) A, V = 5328.2(5) A(3), space group Pna2(1), Z = 2, 35 460 observations, R(F) = 0.069.     

Identification of differentially expressed proteins between human hepatoma and normal liver cell lines by two-dimensional electrophoresis and liquid chromatography-ion trap mass spectrometry

In the previous study, the proteomes of the human hepatoma cell line BEL-7404 and the normal human liver cell line L-02 were separated by high resolution two-dimensional electrophoresis (2-DE). Image analysis revealed that 99 protein spots showed quantitative and qualitative variations that were significant (P < 0.01) and reproducible. Here we report the identification results of some of these protein spots. Protein spots excised from 2-D gels were subjected to in-gel digestion with trypsin, and the resulting peptides were measured by microbore high performance liquid chromatography - ion trap - mass spectrometry (LC-IT-MS) to obtain the tandem mass (MS/MS) spectra. Twelve protein spots were identified with high confidence using SEQUEST with uninterpreted MS/MS raw data. Besides inosine-5'-monophosphate dehydrogenase 2, heat shock 27 kDa protein, calreticulin and calmodulin, whose expression was elevated in hepatoma cells, glutathione-S-transferase P was identified from hepatoma cells in which its level was 18-fold higher compared to human liver cells. Two spots were identified as the homologs of reticulocalbin for the first time in hepatoma cells and their expression increased compared to liver cells. However, tubulin beta-1 chain and natural killer cell enhancing factor B were downregulated in hepatoma cells. A tumor suppressing serpin, maspin precursor, was identified from one spot whose quantity was much higher in the normal liver cell line. More interestingly, epidermal fatty acid-binding protein (E-FABP) and fatty acid-binding protein, adipocyte-type (A-FABP), were detected in liver cells but not in hepatoma cells. The functional implication of the identified proteins was discussed.     

An immune algorithm for resolution of multicomponent overlapping chromatograms

A novel immune algorithm for resolution and quantitative determination of the components in overlapping chromatograms was proposed by imitating biological immune systems. The algorithm takes an overlapping chromatogram as its input and subtracts the chromatograms of standard samples from the input by iteration of a network. When the residual does not change, the network will converge and chromatographic information of the components in overlapping chromatogram will be obtained. Both simulated and experimental data sets were investigated by the method. Results showed that both resolved results and recoveries of quantitative determination are satisfactory. Comparing with conventional least-square method, the immune algorithm is fast in calculation.     

Monte Carlo simulation of adsorption of binary and quaternary alkane isomers mixtures in zeolites: Effect of pore size and structure

Grand canonical Monte Carlo and configurational bias Monte Carlo techniques were employed to simulate the adsorption of binary mixtures of butane isomers and quaternary mixtures in nine zeolites at 300 K. For binary mixtures the results show there is a critical pore size, which is 10-membered-ring about 5.6 Å. The channel sizes of BEA, ISV, MOR and CFI are larger than this critical pore size, they prefer i-butane than n-butane, whereas TON with smaller channel size than critical pore size prefers n-butane than i-butane, but its selectivity decreases with pressure increasing. MFI, MEL and TER prefer i-butane than n-butane at low pressure, but with pressure increasing, the selectivity is reversed. BOG prefers i-butane than n-butane but the selectivity decreased with pressure increasing. It demonstrates that the adsorption and selectivity are controlled by both pore size and pore structure. The n-butane–i-butane–n-pentane–2-methylbutane quaternary mixtures adsorbed in these nine zeolites were studied, and the results show alkane chain length dependence at low pressure, but the adsorption is controlled by pore size and structure with pressure increasing in all the zeolites except for TON and BOG.     

Visually precise,low-damage,single-cell spatial manipulation with single-pixel resolution

The analysis of single living cells, including intracellular delivery and extraction, is essential for monitoring their dynamic biochemical processes and exploring intracellular heterogeneity. However, owing to the 2D view in bright-field microscopy and optical distortions caused by the cell shape and the variation in the refractive index both inside and around the cells, achieving spatially undistorted imaging for high-precision manipulation within a cell is challenging. Here, an accurate and visual system is developed for single-cell spatial manipulation by correcting the aberration for simultaneous bright-field triple-view imaging. Stereo information from the triple view enables higher spatial resolution that facilitates the precise manipulation of single cells. In the bright field, we resolved the spatial locations of subcellular structures of a single cell suspended in a medium and measured the random spatial rotation angle of the cell with a precision of ±5°. Furthermore, we demonstrated the visual manipulation of a probe to an arbitrary spatial point of a cell with an accuracy of <1 pixel. This novel system is more accurate and less destructive for subcellular content extraction and drug delivery.

We achieved the low-damage spatial puncture of single cells at specific visual points with an accuracy of <65 nm.