二氧化钒和三氧化二钒研究进展

VO₂和V₂O₃是优异的光、电、磁热敏材料，在多种技术领域中具有广阔的应用前景，已成为国内外新颖功能材料研究的热点之一。本文综述了VO₂和V₂O₃的粉体、陶瓷和薄膜的研究进展，并对相关问题进行讨论。     

链酚胺型配体锌(Ⅱ)配合物模拟碳酸酐酶研究

合成了酚胺型链状配体,N,N'-二(2-羟基苄基)丙二胺(H~2L)及其Zn(Ⅱ)配合物(ZnL),通过元素分析、IR和^1HNRM等手段进行了表征。采用pH电位滴定法,在25℃±0.1℃,I=0.1mol·dm^-^3(KNO~3)条件下,测定了配体的质子化常数以及配体与金属离子Zn(Ⅱ)配位反应平衡常数。讨论了配体与金属离子Zn(Ⅱ)的配位情况,得到了配位酚羟基的解离常数。运用分光光度法,在25℃±0.1℃,I=0.1mol·dm^-^3(KNO~3)条件下,在pH=5.5～9.0(50mmol·dm^-^3缓冲溶液)范围内,研究了配合物作为碳酸酐酶模拟物催化对-硝基苯酚乙酸酯(NA)水解动力学,得到了NA酯水解的配合物催化速率常数k~N~P。实验结果表明,ZnHL^+的配位酚羟基的解离常数pK~a为6.83;催化速率常数k~N~P与pH之间不存在Sigmoidal型曲线关系,而是在pH值中性附近有最大值,ZnHL^+对NA酯水解有很好的催化效果,并且采取双重催化机理,是碳酸酐酶很好的模拟物。     

(±)-金锦香酸二甲酯甲醚的合成

本文以呋喃甲酸甲酯为原料, 经羟烷基化反应, 醇解反应和O-甲基化反应合成(±)-金锦香酸二甲酯甲醚。同时, 还发现了制备2-乙烯基呋喃衍生物的新方法。     

孔壁含有沸石次级结构单元的MCM-48的合成及催化研究

以双表面活性剂（双极性头表面活性剂和三乙醇胺）为模板，以含有沸石次级结构单元的溶胶为前驱体，在碱性条件下合成了新型介孔分子筛MCM 48。研究了沸石前驱体和三乙醇胺对产物MCM 48形成的影响，XRD和TEM表征结果表明，样品具有较高的结晶度和规则的孔径；FTIR和N2吸附表征结果表明，产物MCM 48的孔壁中含有沸石的次级结构单元，从而使得样品具有更大的比表面积。产物的重芳烃轻质化反应催化活性表明，实验样品对重芳烃的转化率比常规的MCM 48高，转化率约高出11%，进一步证明了实验样品的孔壁中含有沸石的结构单元。     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

Study on the interaction of trypsin with some DNAs and their analytical application by resonance Rayleigh scattering spectra

When trypsin reacts with Herring sperm DNA (hsDNA), Salmon sperm DNA (sDNA), and Calf thymus DNA (ctDNA) to form a complex, the resonance Rayleigh scattering (RRS) was remarkably enhanced and new RRS spectra appear. These new spectra have similar characteristics of RRS spectra. The maximum RRS peaks are at 307 nm (hsDNA, sDNA) and 290 nm (ctDNA), and other peaks are at 350 nm. The scattering intensity is proportional to the concentration of DNA or trypsin; so this intereaction can be used to determine trypsin using DNA or DNA using trypsin. In the determination of DNA using trypsin, the linear ranges for hsDNA, sDNA, and ctDNA are 0–2.3, 0–2.5, and 0–1.9 μg·mL⁻¹, and the detection limits are 0.4, 0.7, and 1.1 ng·mL⁻¹, respectively. In the determination of trypsin using hsDNA, the linear range is 0–30.0 μg·mL⁻¹, and the detection limit is 39.0 ng·mL⁻¹. In this paper, the intereaction conditions were optimized. The affecting factors, chemical properties of the complex, and the composition ratio of trypsin with DNA were investigated. Using trypsin as RRS probe, a sensitive method for the determination of trace amounts of DNA was developed. Translated from Chemical Journal of Chinese Universities, 2006, 27(3) (in Chinese)     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Synthesis of Some Novel 3,6‐Bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole Derivatives

The cyclization of 1‐amino‐2‐mercapto‐5‐[1‐(4‐ethoxyphenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐1,3,4‐triazole which was synthesized from p‐ethoxyaniline with various triazole acid in absolute phosphorus oxychloride yields 3,6‐bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole derivatives 9a?j , and their structures are established by MS, IR, CHN and ¹H NMR spectral data.     

Hydrogen bonding and π–π stacking in 6‐hydroxy­biochanin A monohydrate

In the lattice of the title compound (systematic name: 5,6,7‐trihydroxy‐4′‐meth­oxy­isoflavone monohydrate), C₁₆H₁₂O₆·H₂O, the isoflavone mol­ecules are linked into chains through R₄³(17) motifs composed via O—H⋯O and C—H⋯O hydrogen bonds. Centrosymmetric R₄²(14) motifs assemble the chains into sheets. Hydrogen‐bonding and aromatic π–π stacking inter­actions lead to the formation of a three‐dimensional network structure.