A Simple and Efficient Approach for Estimating Recovery of a Preparative Reversed Phase HPLC Purification

The widely applied reversed phase high-performance liquid chromatography (RP-HPLC) is an indispensable purification technique in drug discovery. During drug discovery, recovery was usually calculated based on the weight of the purified product after drying over the weight of the crude material multiplied by the assumed purity from HPLC/UV area percent of the product. Such a purity assumption can be off significantly when the crude material contains water, solvents, other UV-inactive impurities and inorganic salts. In this paper, we report a simple and efficient way to estimate recovery of preparative HPLC purification process. It is based on the ratio of the HPLC/UV peak area measured for the product in the crude solution and that in the final collected fraction with both accounted for their volumes. This approach eliminates not only the need for drying of the collected fraction to calculate recovery but also the inaccuracy associated with the true content in the crude sample using the traditional method. A systematic study was conducted to verify this method using caffeine mixed with various UV-active and -inactive impurities. The calculated recoveries using this approach were found to be consistent within 4% with the true recoveries based on dry weight estimation. The approach has been successfully applied for our in-house purifications. Furthermore, the approach was extended to library purifications, where in many cases heart-cutting the desired peaks is used to meet the purity requirements.

     

Ag(I), Cu(II), and Cd(II) sulfacetamide complexes: Synthesis,spectral, thermal study,and antimicrobial activity assessment

Sulfacetamide complexes of Ag(I), Cu(II), and Cd(II) were synthesized and characterized by the elemental analyses and IR and ¹H NMR spectra. Structural assessment revealed two modes of coordination in the sulfacetamide complexes, showing that sulfacetamide reacts as a bidentate ligand and coordinates to Ag(I) and Cd(II) through the amido and sulfonyl oxygens and to Cu(II) through the NH₂ nitrogen. Molar conductance measurements in DMSO showed that both the complexes are nonelectrolytes in nature, which allowed they to be assigned the formulas [Ag(SAM-Na)(NO₃)H₂O)]·3H₂O, [Cu(SAM-Na)₂(Cl)₂], and [Cd(SAM-Na)(Cl)₂]·10H₂O. The kinetic and thermodynamic parameters of the thermal decomposition reactions of the complexes were estimated from the TG/DTG curves by the Coats–Redfern and Horowitz–Metzeger methods. The surface morphology of sulfacetamide complexes was scanned using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) analyses.     

UV partial least-squares calibration and liquid chromatographic methods for direct quantitation of levofloxacin in urine

Levofloxacin was determined in human urine samples by application of a spectrophotometric multivariate calibration partial least-squares (PLS-1) method. A calibration set consisting of standards was prepared by using a multilevel multifactor experimental design. In order to ensure accurate results, the calibration matrix included a urine sample free of levofloxacin (i.e., urine blank). The components of the calibration matrix were levofloxacin and urine. The concentration of levofloxacin ranged from 0.5 to 16.5 microg/mL. Different urine concentrations were used as the second component of the calibration matrix in order to include the information inherent in the changes in the UV spectrum for urine upon dilution. In addition, a high-performance liquid chromatographic method was proposed. In this method, a Shim-pack amino column was used at ambient temperature with a mobile phase of 25 mM potassium dihydrogen phosphate (pH adjusted to 3.1 with phosphoric acid)-acetonitrile (70 + 30, v/v), and the flow rate was 1 mL/min. UV detection at 293 nm was used for quantitation. The proposed methods were applied to the determination of the dissolution rate for tablets containing levofloxacin. The urinary excretion pattern for the cumulative amount of levoflacin excreted was also calculated.     

Synthesis,cytotoxicity assessment and antioxidant activity of some new thiazol-2-yl carboxamides

Dependence on the biological activity of 2-aminothiazole, the synthesis and chemical reactions of ethyl 3-oxo-3-(thiazol-2-ylamino)propanoate ( 1 ) with some different reagents were described for cytotoxic and antioxidant evaluation. The new derivatives 2–19 could be synthesized and characterized by correct analytical and spectral data. In addition to the thiazole ring, these compounds contain 2H-1,2,3-triazole ( 3 ), 1H-pyrazole ( 5 , 12 ), 1,3-dithiane ( 7 ), benzothiazole ( 10 ), thiazolidine ( 13 ), thiazolidinone ( 14 , 15 ), 2H-chromene ( 17 ), pyridine ( 19 ) moieties. The preparation of compounds 2–19 was performed through the formation of the isolable 2-(2-phenylhydrazineylidene) 2 , 2-dimethylaminomethylidene 4 , 2-phenylcarbamothioyl 9 , 2-(methylthio)(phenylamino) methylidene 11 and non-isolable potassium bis(thiolate) 6 , potassium thiolate 8 intermediates from precursor 1 . The activity of these derivatives 1–19 against human lung fibroblast (WI38) and human prostate cancer (PC3) were examined in vitro using the MTT assay. The assessment of their antioxidant activities was carried out by following the ABTS method to evaluate their pharmaceutical importance.     

Functional Itô calculus,path-dependence and the computation of Greeks

Dupire’s functional Itô calculus provides an alternative approach to the classical Malliavin calculus for the computation of sensitivities, also called Greeks, of path-dependent derivatives prices. In this paper, we introduce a measure of path-dependence of functionals within the functional Itô calculus framework. Namely, we consider the Lie bracket of the space and time functional derivatives, which we use to classify functionals accordingly to their degree of path-dependence. We then revisit the problem of efficient numerical computation of Greeks for path-dependent derivatives using integration by parts techniques. Special attention is paid to path-dependent functionals with zero Lie bracket, called locally weakly path-dependent functionals in our classification. Hence, we derive the weighted-expectation formulas for their Greeks. In the more general case of fully path-dependent functionals, we show that, equipped with the functional Itô calculus, we are able to analyze the effect of the Lie bracket on the computation of Greeks. Moreover, we are also able to consider the more general dynamics of path-dependent volatility. These were not achieved using Malliavin calculus.     

Synthesis and characterization of nano-silica gel aged under microwave radiation from white sandstone

Double perovskite La₂NiMnO₆ thin film was successfully prepared on (001)-oriented 0.7 wt% Nb-doped SrTiO₃ single crystal substrate by chemical solution deposition method. The microstructures as well as properties were investigated. The results show that the derived thin film is an admixture of Ni/Mn ordering, and two ferromagnetic transitions are observed with Curie temperatures of 289 and 110 K, respectively. A crossover from positive to negative magnetodielectric effect is observed near room temperature. The success preparation of La₂NiMnO₆ thin film by chemical solution deposition will provide a useful method to deposit double perovskite multiferroic thin films with low-cost.     

Synthesis and Spectral Properties of 4‐(2,5‐Dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO)

An interesting flourophore, 4‐(2,5‐dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) was synthesized by mixing an equivalent molar quantity of hippuric acid and 2,5‐dimethoxybenzaldehyde in acetic anhydride in the presence of anhydrous sodium acetate. The absorption and fluorescence characteristics of 4‐(2,5‐dimethoxy‐phenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) were investigated in different solvents. DMPO dye exhibits red shift in both absorption and emission spectra as solvent polarity increases, indicating change in the dipole moment of molecules upon excitation due to an intramolecular charge transfer interaction. The fluorescence quantum yield depends strongly on the properties of the solvents, which was attributed to positive and negative solvatokinetic effects. A crystalline solid of DMPO gave strong excimer like emission at 630 nm due to the excitation of molecular aggregates. This is expected from the idealized crystal structure of the dye that belongs to the B‐type class of Steven's Classification. DMPO displayed fluorescence quenching by triethylamine via nonemissive exciplex formation.     

Determination of glucosamine and carisoprodol in pharmaceutical formulations by LC with pre-column derivatization and UV detection

A simple and reliable precolumn derivatization liquid chromatography method with ultraviolet detection has been developed and validated for the analysis of glucosamine (GS) in various dietary supplement formulations and raw materials. Additionally, the proposed method was used for analysis of carisoprodol (CR) found in ternary mixture with paracetamol (PR) and caffeine (CF). The linearity ranges were 1-100 μg/mL for GS, 1-150 μg/mL for CR, PR and CF. Derivatization was used with 1,2-naphthoquinone-4-sulphonic acid sodium salt in the presence of borate buffer. Chromatographic separation of GS-naphthoquinone derivative was achieved by using a mixture of acetonitrile and water (pH 7.3 adjusted with 0.1 M NaOH) in the ratio 10:90, v/v and flow-rate of 1.0 mL/min. UV detection was carried out at 280 nm. For PR, CF, and CR-naphthoquinone derivative, the chromatographic separation was achieved by using mixture of acetonitrile and 20 mM KH(2)PO(4) (pH 3.0 adjusted with phosphoric acid) in the ratio 20:80, v/v and flow-rate of 1.0 mL/min. UV detection was carried out at 275 nm. The limits of detection were 37.2, 35.9, 30.4 and 40.0 ng/mL for GS, CR, PR and CF, respectively.     

On-line sample cleanup and enrichment chromatographic technique for the determination of ambroxol in human serum

A sensitive and efficient on-line clean up and pre-concentration method has been developed using column-switching technique and protein-coated μ-Bondapak CN silica pre-column for quantification of ambroxol (AM) in human serum. The method is performed by direct injection of serum sample onto a protein-coated μ-Bondapak CN silica pre-column, where AM is pre-concentrated and retained, while proteins and very polar constituents are washed to waste using a phosphate buffer saline (pH 7.4). The retained analyte on the pre-column is directed onto a C(18) analytical column for separation, with a mobile phase consisting of a mixture of methanol and distilled deionized water (containing 1% triethylamine adjusted to pH 3.5 with ortho-phosphoric acid) in the ratio of 50:50 (v/v). Detection is performed at 254 nm. The calibration curve is linear over the concentration range of 12-120 ng/mL (r(2) = 0.9995). The recovery, selectivity, linearity, precision, and accuracy of the method are convenient for pharmacokinetic studies or routine assays.     

Novel thermostable and alkalitolerant amylase production by Geobacillus stearothermophilus HP 3

This study reports the production and characterisation of a novel thermostable alkaline amylase from the newly isolated Geobacillus stearothermophilus HP 3. The optimum temperature and pH for enzyme production was 55°C and 9.0, respectively. The amylase powder obtained from the culture filtrate by pre-chilled acetone treatment was stable over a wide pH range and liquefied thick starch slurries at 75°C. Ca2? and Co2? were required for the thermostability of the enzyme preparation. The present purified amylase therefore could be defined as thermostable and alkalitolerant with new properties that make the enzyme applicable for many starch processing applications for use in the food industry.