Simultaneous ion-exclusion/cation-exchange chromatography of anions and cations in acid rain waters on a weakly acidic cation-exchange resin by elution with sulfosalicylic acid

A simple, selective, and sensitive method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was developed using ion-exclusion/ cation-exchange chromatography with conductimetric detection. A weakly acidic cation-exchange resin column (Tosho TSKgel OA-PAK-A) and a sulfosalicylic acid-methanol-water eluent was used. With a mobile phase comprising 1.25 mM sulfosalicylic acid in methanol-water (7.5:92.5) at 1.2 ml/min, simultaneous separation and detection of the above anions and cations was achieved in about 30 min. Linear calibration plots of peak area versus concentration were obtained over the concentration ranges 0-1.0 mM for anions (R=0.9991) and 0-0.5 mM for cations (R=0.9994). Detection limits calculated at S/N=3 ranged from 4.2 to 14.8 ppb for the anions and from 2.4 to 12.1 ppb for the cations. The reproducibility of retention times was 0.14-0.15% relative standard deviation (RSD) for anions and 0.18-0.31% for cations, and reproducibility of chromatographic peak areas was 1.22-1.75% RSD for anions and 1.81-2.10% for cations. The method was applied successfully to the simultaneous determination of anions and cations in aerosols transported from mainland China to central Japan, as determined by a meteorological satellite data analyzer.     

Influence of substitutions on asymmetric dihydroxychlorins with regard to intracellular uptake, subcellular localization and photosensitization of Jurkat cells

The search for new efficient sensitizers for photodynamic therapy (PDT) points to improve photophysical properties like absorption in the red region and singlet oxygen quantum yield as well as to control the localization of the sensitizer within the tumour cell. Depending on their physicochemical properties and their uptake mechanism, sensitizers can reach different intracellular concentrations and localize in different subcellular compartments. Moreover, the preferential localization of a sensitizer in target organelles, like mitochondria or lysosomes, could determine the cell death mechanism after PDT. This study aimed to investigate the influence of substitutions on dihydroxychlorins with regard to intracellular uptake, subcellular localization and cell death pathway. Moreover, the effect of a liposome-based delivery system was tested. The intracellular uptake was found to be strictly dependent on the sensitizer molecular structure and the means of its delivery. The most polar sensitizer in this study (compound 3) had, depending on incubation time, an intracellular concentration 2-8 times higher than the unsubstituted chlorin 1. All investigated photosensitizers localize predominantly in lysosomes but after longer incubation times weak fluorescence intensity was also detected in mitochondria and Golgi apparatus. The cell death pathway was found to be influenced by the sensitizer intracellular concentration and the applied light doses. In general, the increasing amphiphilicity of the sensitizer molecules is correlated with an increased sensitizer uptake and an increased rate of necrotic cells after irradiation.     

Bildung siliciumorganischer Verbindungen. 73. Reaktionen C-chlorierter 1,3-Disilapropane mit CH3MgCl

Formation of Organosilicon Compounds. 73. Reactions of C-chlorinated 1,3-Disilapropanes with CH₃MgCl (Cl₃Si)₂CCl₂ reacts with an excess of meMgCl (me = CH₃) in Et₂O (diethylether) forming (me₃Si)₂₂C?CH₂ mainly besides Si-methylated 1,3-disilapropanes with CmeCl, CHCl, CH₂ groups [6]. For investigating the mechanism of formation of the methylidengroup reactions were carried out with differently Si-methylated and Si-chlorinated 2-methyl-1-2-chloro-1,3-disilapropanes and 2,2-dichloro-1,3-disilapropanes. Whereas (me₃Si)₂CmeCl reacts neither with meMgCl nor with Lime. it forms (me₃Si)₂C?CH₂ and (me₃Si)₂CmeH with Li or Mg resp. The reaction starts with the metallation to (me₃Si)₂CmeLi and (me₃Si)₂Cme(MgCl) resp., followed by elimination of LiH and HMgCl resp. with formation of (me₃Si)₂C?CH₂. LiH and HMgCl resp. reduces (me₃Si)₂CmeCl to (me₃Si)₂CmeH. This mechanism is supported by the reactions of (me₃Si)₂CCl(CD₃). The Si-chlorination increases the reactivity of the CmeCl group and the created C?CH₂ group favours Si-methylation. The CCl₂ group is more reactive than the CmeCl group; (me₃Si)₂CCl₂ already forms the methyliden group with meMgCl in Et₂O via the not isolated intermediate (me₃Si)₂CCl(MgCl). which prefers the methylation to (me₃Si)₂Cme(MgCl). The n.m.r. data of the investigated compounds are given.     

Photochemistry of 3-Substituted 1-Iminopyridinium Ylides. Regiospecific versus non-regiospecific photoisomerization patterns [1]

3-Substituted 1-iminopyridinium ylides 1 undergo photo-induced ring enlargement to 1H-1,2-diazepines. With strongly electron-withdrawing substituents the ring expansion process is regiospecific and leads exclusively to 4-substituted 1 H-1, 2-diazepines. Weak electron-donating substituents, like a methyl group and halogen atoms, do not have any directing effect since both 4- and 6-substituted 1 H -1,2-diazepines are obtained. With strong electron-donating substituents no diazepines are formed; instead one observes photo-induced isomerization to the 2-aminopyridine derivatives, the process being non-regiospecific. Regiospecific photo-induced ring expansion processes are explained in terms of a simple HMO model.     

“Stat” methods in continuous flow analysis : Determination of Copper,Iron, Iodide and Hydrochloric Acid

A continuous flow “stat” method is described in which a certain arbitrarily imposed state in the flowing stream is automatically maintained by regulating the rate of flow of one of the components. The electronic system is regulated by measuring a physical phenomenon in the flowing solution. The method is illustrated by the examples of a continuous flow absorptiostat [Fe(III)/S₂O₃^2-/Cu(II)]for determinations of copper(II) (1–10 μg ml^-1), iron(III) (25–250 or 12.5–125 μg ml^-1), as well as for determination of iodide (12.8–128 μg ml^-1). A continuous flow conductostat [HCl/NaOH] for determination of 1–2.5 × 10^-4 M HCl is also described. This analytical technique is intended for automatic continuous monitoring of sample streams.     

Bildung siliciumorganischer Verbindungen. XXXIX. Teilchlorierte Carbosilane

1. Photochlorination in CCl₄ of the Si-chlorinated carbosilanes (Cl₃Si? CH₂)₂SiCl₂ and (Cl₂Si? CH₂)₃ leads to totally chlorinated compounds, e. g. (Cl₃Si? CCl₂)₂SiCl₂. After chlorination has started at one CH₂ group, formation of a CCl₂ group is preferred before another CH₂ group is involved into the reaction. Thus preparation of compounds a, b, c is possible. Cl₃Si? CCl₂? SiCl₂? CH₂? SiCl₃ (a) for (b) and (c) (see “Inhaltsübersicht”). SO₂Cl₂ (benzoyl peroxide) as chlorinating agent reacts more slowly, and opens an access to carbosilanes containing CHCl groups such as (d), Cl₃Si-CHCl? SiCl₂? CH₂? SiCl₃ (e). Reactions of compounds (a) to (d) with LiAlH₄ yields carbosilanes with SiH groups, and partially chlorinated C atoms. 2. By the high reactivity of Si? CCl₂? Si groups an exchange of Cl atoms of CCl groups in perchlorinated carbosilanes is possible for H atoms of Si? H groups in perhydrogenated carbosilanes, thus allowing the preparation of compounds containing CHCl and SiHCl groups, e. g. according to Gl.(1) (Inhaltsübersicht). Further reactions, formulated as the last equations in Inhaltsübersicht, are reported as well as the rearrangement of H₃Si? CHCl? SiH₃.     

Reaktionen von o-Chinonen mit Aminen und Proteinen. 4. Mitteilung. 7a-Methyl-5,6-dioxo-5,6,7,7a-tetrahydroindol-Derivate aus 4-Methylbrenzcatechin und Enaminen

Reactions of o-Quinones with Amines and Proteins. 7a-Methyl-5,6,7,7a-tetrahysroindole Derivatives from 4-Methylcatechol and Enamines Methyl l-[2′-(methoxycarbonyl)ethyl]-7a-methyl-5,6-dioxo-5.6.7,7a-tetrahydro-indole-3-carboxylate ( 1 ) was isolated after the oxidation of 4-methylcatechol with silver ( 1 ) oxide in the presence of b?-alanine methyl ester in glacial acetic acid. The formation of 1 requires in situ dehydrogenation of the b?-aminocarboxylate and addition of the resulting enamine to 4-methyl-1,2-benzoquinone. Reaction of ethyl 3-(phenylamino)crotonate with 4-methyl-1,2-benzoquinone afforded ethyl 2,7a-dimethyl-5,6-dioxo-1-phenyl-5,6,7,7a-tetrahydroindole-3-carboxylate ( 6 ). Despite the fact that the yields are low, the addition of enamines to o-quinones represents an interesting novel extension of the Nenitzescu-reaction which is well known in the p-quinone series. Compound 1 may be considered as a novel model for the crosslinking of proteins by o-quinones. Formation of 1 was, however, not observed under physiological conditions.     

Selectivity behavior of low-capacity, partially sulfonated, macroporous resin beads

Cation-exchange resins with capacities ranging from 0.23 to 3.70 mequiv./g were prepared by sulfonation of highly cross-linked macroporous polystyrene resins. Distribution coefficients for exchange of hydrogen-form resin for polyvalent metal cations in 1 M acid show marked increases with increasing resin capacity.     

Rapid enzyme-linked immunoassay for detection of Salmonella in food and feed products: performance testing program

The BIOLINE Salmonella ELISA Test for Salmonella spp., which is a rapid, easy, and convenient assay was evaluated for use in detecting Salmonella in foods and feeds. Each food matrix or feed was artificially contaminated with low levels of Salmonella. Twenty different matrixes were studied and 20 different Salmonella strains from a broad variety of serogroups (B, C, D, E, F, G, H, I, M, O, P, and U) were used. The EUSA Test kit detected levels as low as 1 cfu/25 g sample with at least 4 of the 20 matrixes tested. The test kit is applicable to all sample types tested. The BIOLINE Salmonella ELISA Test kit has been granted AOAC-RI performance tested status.     

The Prospect of Dimensionality in Porous Semiconductors

With the advent of silicon-based semiconductors, a plethora of previously unknown technologies became possible. The development of lightweight low-dimensional organic semiconductors followed soon after. However, the efficient charge/electron transfers enabled by the non-porous 3D structure of silicon is rather challenging to be realized by their (metal-)organic counterparts. Nevertheless, the demand for lighter, more efficient semiconductors is steadily increasing resulting in a growing interest in (metal-)organic semiconductors. These novel materials are faced with a variety of challenges originating from their chemical design, their packing and crystallinity. Although the effect of molecular design is quite well understood, the influence of dimensionality and the associated change in properties (porosity, packing, conjugation) is still an uncharted area in (metal-)organic semiconductors, yet highly important for their practical utilization. In this Minireview, an overview on the design and synthesis of porous semiconductors, with a particular emphasis on organic semiconductors, is presented and the influence of dimensionality is discussed.