硫化态K—Mo合成低碳醇催化剂的制备条件和载体效应研究

用浸渍法制备以KCl为助剂的ZrO_2、γ-Al_2O_3和SiO_2负载硫化态钼基催化剂,研究了钼和助剂钾两种组分浸渍顺序、助剂含量、载体差别以及浸渍溶液的酸碱性对催化剂上CO加氢合成低碳混合醇性能的影响。ZrO_2按先钼后钾、γ-Al_2O_3和SiO_2则按相反的顺序浸渍两种组分、且K/Mo原子比分别为0.5,0.8和1.0制备催化剂,其合成醇活性最佳。由于载体性质的差异,K-Mo/SiO_2、特别是K-Mo/ZrO_2的合成醇活性强烈依赖于钾助剂含量。而K-Mo/SiO_2在较宽的钾含量范围内,其活性差别不明显。适当选择较高碱性的浸渍溶液制备K-Mo/γ-Al_2O_3催化剂,有利于醇活性的提高。     

First Total Synthesis of (±)-Aiphanol

Aiphanol was isolated from the seeds of Aiphanes aculeate Willd. (Arecaceae) collected in Peru and was reported to exhibit significant inhibitory activities against cyclooxyge- nases-1 and -2. The structure of aiphanol was elucidated by spectroscopic methods as an unprecedented stilbenolignan skeleton in which a stilbene moiety is linked to a phenylpropane unit through a dioxane bridge1. In our previous works the synthetic approach to 1,4-benzodioxane lignans were achieved2. Since aiphanol…     

2-硝基丙烯热解反应的理论研究

利用MO-AM1方法研究了2-硝基丙烯热解的反应途径。结果表明, 2-硝基丙烯可能首先热解产生一个四元环状中间体。该中间体依照分步过程继续分解时, 存在两种可能的途径, 其中先断N—O键的反应过程比先断C—C键的过程从能量上更为有利。反应过程中电荷无明显转移, 具有双自由基反应特点。     

Enzymatic surface modification of Kevlar fibers

Horseradish peroxidase catalyzed grafting of acrylamide (AM) onto Kevlar fibers has been studied. The modified fiber has been characterized with scanning electron microscopy (SEM), elemental analysis and the grafting yield. From the SEM micrographs, the surface of the grafted Kevlar fiber is rougher than that of the untreated fiber, and the elemental analysis indicated that the nitrogen content of the treated fibers is higher than that of the untreated fiber. All the results suggested that AM must have been grafted onto the Kevlar surface through HRP-mediated radical initiated grafting reaction. The probably mechanism of HRP catalyzed grafting of AM onto Kevlar surface is proposed.     

形态结构和光电特性对纳米TiO2光催化性能的影响

采用sol-gel法制备了系列纳米TiO2光催化剂,运用X射线衍射、BET比表面测定、紫外漫反射吸收光谱和表面光电压谱等手段对催化剂进行表征,并以乙烯作为光催化反应的指标反应分子,研究了TiO2纳米晶的性质对于光催化活性的影响.随着焙烧温度的升高,TiO2的晶粒逐渐增大,比表面积下降,晶相由锐钛矿向金红石转变,其吸收带边与光伏响应阈值向长波方向移动,氧化－还原能力降低,降解乙烯的转化率迅速下降.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

磷脂酰胆碱与牛血清白蛋白相互作用的FT-IR研究

利用傅立叶变换红外(FT-IR)和拉曼(FT-Raman)光谱研究了高浓度磷脂酰胆碱(PC)与牛血清白蛋白(BSA)的相互作用,及Eu3＋对该作用的影响.FT-IR结果显示,PC/BSA混合体系中二者的相互作用主要发生在PC头部极性基团,且这一作用随BSA含量的增加而增强,作用后蛋白质二级结构中α螺旋的比例有所增加. FT-Raman光谱说明PC与BSA的相互作用影响磷脂CH链的排列有序程度. PC/BSA/Eu3＋体系的红外光谱显示, Eu3＋与PC的磷氧键发生了强相互作用,并使蛋白α螺旋的比例进一步增加.     

乙基乙酰胺热解反应机理的MO研究

对于烷基乙酰胺的初始热解反应机理, 通常认为与酯类的热解反应相类似。Maccoll和Nagra通过对该热解反应的动力学研究, 认为两者存在不同。差异之一, 烷基乙酰胺存在两种可能的热解途径【参见本文(129页)前述反应方程(1),(2)】。而在酯类热解反应中(2)的活化能过高, 且四元环过渡态极不稳定。差异之二, 极性溶剂(比如乙酸)对酰胺热解反应的催化作用不明显, 而对酯类等气相热解反应的催化作用是十分显著的。为此, 我们用MINDO/3分子轨道法对乙基乙酰胺的初始热解反应进行了较全面的研究。用能量梯度法对此反应的反应物、中间体和生成物的平衡几何构型进行了全优化。(如图1所示)用极小能量途径法分别寻找反应(1)和反应(2)的初始过渡态, 继而用Powell法全优化过渡态的几何构型, 计算所得的过渡态TS1、TS2和TS3分别见图2a, 图3a和图4a。为了确证这些过渡态, 进行了振动分析研究, 结果表明这些过渡态的力常数矩阵的诸本征值中均只有一个负值, 且虚振动模式展示了走向各自的反应物和生成物的趋势, (如图2b,图3b和图4b所示)。它们的总能量及反应(1)和反应(2)的活化能列于表1. 对整个热解反应(1)作了内禀反应坐标(IRC)理论分析, 反应历程见图5所示. 与IRC相应的总能偶极矩以及部分关键的键长和原子净电荷变化一并列于表2.本文研究结果表明, 在乙基乙酰胺的初始反应中主反应即反应(1)与酯类反应相类似, ...