Nomographs for synthesis of epicyclic-type automatic transmissions

This paper presents a MATLAB optimization technique for the determination of the gear ratios of epicyclic-type transmission mechanisms for a given set of velocity ratios. First, all of the feasible clutching sequences are enumerated directly without using complicated techniques. Then, for the transmission mechanism with the associated clutching sequence graph, the overall velocity ratios are derived and expressed in terms of the gear ratios of all the mating gears. Next, following the general trend of increased shift stages and a wider range of velocity ratios, the numbers of teeth of all gears are estimated by MATLAB optimization technique in a single run. Ravigneaux gear mechanisms are used as design examples. The methodology can be applied to any transmission mechanism depending on its kinematic and geometric constraints. New five- and six-velocity automatic transmissions are enumerated from the Ravigneaux gear mechanism. It is a major breakthrough to design a completely satisfactory six-speed automatic transmission from the Ravigneaux gear mechanism since it has only eight links. The new design makes use of the benefits of the Ravigneaux gear train and overcomes the previous art difficulties. This structural design has realized a six-speed automatic transmission, while having minimal number of clutches, and brakes. It is also low cost due to adoption of the conventional available Ravigneaux gear train.     

Minor Alicyclic Diterpene Acidsfrom Conyza incana

 The reinvestigation of the CH₂Cl₂ extract of the aerial parts of Conyza incana led to the isolation of three minor alicyclic diterpene acids. The structures of the new compounds were established by a combination of spectroscopic methods.     

Phase boundary propagation in large LiFePO4 single crystals on delithiation

Large single crystals of LiFePO(4) have been chemically delithiated. The relevance of chemical oxidation in comparison with electrochemical delithiation is discussed. Analyses of the Li content and profiles were done by electron energy loss spectroscopy and secondary ion mass spectrometry. The propagation of the FePO(4) phase growing on the surface of the large single crystal was followed by in situ optical microscopy as a function of time. The kinetics were evaluated in terms of linear irreversible thermodynamics and found to be characterized by an induction period followed by parabolic growth behavior of the FePO(4) phase indicating transport control. The growth rate was shown to depend on the crystallographic orientation. Scanning electron microscopy images showed cracks and a high porosity of the FePO(4) layer due to the significant changes in the molar volumes. The transport was found to be greatly enhanced by the porosity and crack formation and hence greatly enhanced over pure bulk transport, a result which is supposed to be very relevant for battery research if coarse-grained powder is used.     

Effect of gamma radiation on the mechanical and barrier properties of HEMA grafted chitosan-based films

Chitosan films were prepared by dissolving 1% (w/v) chitosan powder in 2% (w/v) aqueous acetic acid solution. Chitosan films were prepared by solution casting. The values of puncture strength (PS), viscoelasticity coefficient and water vapor permeability (WVP) of the films were found to be 565 N/mm, 35%, and 3.30 g mm/m² day kPa, respectively. Chitosan solution was exposed to gamma irradiation (0.1–5 kGy) and it was revealed that PS values were reduced significantly (p≤0.05) after 1 kGy dose and it was not possible to form films after 5 kGy. Monomer, 2-hydroxyethyl methacrylate (HEMA) solution (0.1–1%, w/v) was incorporated into the chitosan solution and the formulation was exposed to gamma irradiation (0.3 kGy). A 0.1% (w/v) HEMA concentration at 0.3 kGy dose was found optimal-based on PS values for chitosan grafting. Then radiation dose (0.1–5 kGy) was optimized for HEMA grafting. The highest PS values (672 N/mm) were found at 0.7 kGy. The WVP of the grafted films improved significantly (p≤0.05) with the rise of radiation dose.     

Biosynthesis of structurally novel carotenoids in Escherichia coli

Previously, we utilized in vitro evolution to alter the catalytic functions of several carotenoid enzymes and produce the novel carotenoids tetradehydrolycopene and torulene in Escherichia coli. Here we report on the successful extension of these pathways and the C(30) carotenoid diaponeurosporene pathway with additional carotenoid genes. Extension of the known acyclic C(30) pathway with C(40) carotenoid enzymes-spheroidene monooxygenase and lycopene cyclase-yielded new oxygenated acylic products and the unnatural cyclic C(30) diapotorulene, respectively. Extension of acyclic C(40) pathways with spheroidene monooxygenase generated novel oxygenated carotenoids including the violet phillipsiaxanthin. Extension of the torulene biosynthetic pathway with carotene hydroxylase, desaturase, glucosylase, and ketolase yielded new torulene derivatives. These results demonstrate the utility of extending an in vitro evolved central metabolic pathway with catalytically promiscuous downstream enzymes in order to generate structurally novel compounds.     

Electrochemical Behaviour of Iron in a Third‐Generation Ionic Liquid: Cyclic Voltammetry and Micromachining Investigations

The electrochemical behaviour of Fe in 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([Emim]⁺Ntf2^?) and mixtures with Cl^? is studied with the aim of investigating the applicability of ionic liquids (IL) for the electrochemical machining of iron. Whereas in pure IL iron could not be significantly dissolved, the addition of Cl^? enables the active dissolution with anodic current densities up to several mA cm^?2. Although several anodic peaks appear in the cyclic voltammograms (CV), the distinct assignment of those electrochemical processes remain difficult. In particular no proof for the formation of FeCl_x^2?x complexes during Fe dissolution are deduced from the CV, although such complexes are shown to be stable in the employed electrolyte. In addition, we present electrochemical drilling experiments with short potential pulses, which demonstrate that electrochemical machining of Fe is, in principle, possible in IL based electrolytes, even though hampered by slow machining speed.     

A disruption recovery model for a single stage production-inventory system

This paper presents a newly developed disruption recovery model for a single stage production and inventory system, where the production is disrupted for a given period of time during the production up time. The model is categorized as a constrained non-linear optimization program which we have solved using an efficient heuristic developed in this paper. The model was also solved using an evolutionary algorithm and a comparison of the results from both methods was performed. The heuristic was able to accurately solve the model with significantly less time compared to the evolutionary algorithm. It can be shown that the optimal recovery schedule is dependent on the shortage cost parameters, as well as the extent of the disruption. The proposed model offers a potentially useful tool to help manufacturers decide on the optimal recovery plan in real time whenever the production system experiences a sudden disruption.     

Design of energy band alignment at the Zn(1-x)Mg(x)O/Cu(In,Ga)Se2 interface for Cd-free Cu(In,Ga)Se2 solar cells

The electronic band structure at the Zn(1-x)Mg(x)O/Cu(In(0.7)Ga(0.3))Se(2) interface was investigated for its potential application in Cd-free Cu(In,Ga)Se(2) thin film solar cells. Zn(1-x)Mg(x)O thin films with various Mg contents were grown by atomic layer deposition on Cu(In(0.7)Ga(0.3))Se(2) absorbers, which were deposited by the co-evaporation of Cu, In, Ga, and Se elemental sources. The electron emissions from the valence band and core levels were measured by a depth profile technique using X-ray and ultraviolet photoelectron spectroscopy. The valence band maximum positions are around 3.17 eV for both Zn(0.9)Mg(0.1)O and Zn(0.8)Mg(0.2)O films, while the valence band maximum value for CIGS is 0.48 eV. As a result, the valence band offset value between the bulk Zn(1-x)Mg(x)O (x = 0.1 and x = 0.2) region and the bulk CIGS region was 2.69 eV. The valence band offset value at the Zn(1-x)Mg(x)O/CIGS interface was found to be 2.55 eV after considering a small band bending in the interface region. The bandgap energy of Zn(1-x)Mg(x)O films increased from 3.25 to 3.76 eV as the Mg content increased from 0% to 25%. The combination of the valence band offset values and the bandgap energy of Zn(1-x)Mg(x)O films results in the flat (0 eV) and cliff (-0.23 eV) conduction band alignments at the Zn(0.8)Mg(0.2)O/Cu(In(0.7)Ga(0.3))Se(2) and Zn(0.9)Mg(0.1)O/Cu(In(0.7)Ga(0.3))Se(2) interfaces, respectively. The experimental results suggest that the bandgap energy of Zn(1-x)Mg(x)O films is the main factor that determines the conduction band offset at the Zn(1-x)Mg(x)O/Cu(In(0.7)Ga(0.3))Se(2) interface. Based on these results, we conclude that a Zn(1-x)Mg(x)O film with a relatively high bandgap energy is necessary to create a suitable conduction band offset at the Zn(1-x)Mg(x)O/CIGS interface to obtain a robust heterojunction. Also, ALD Zn(1-x)Mg(x)O films can be considered as a promising alternative buffer material to replace the toxic CdS for environmental safety.     

Photochemical Generation of 9H‐Fluorenyl Radicals

A series of 9‐substituted fluorenols and 9,9′‐disubstituted‐9,9′‐bifluorenyls were irradiated to give products derived from fluorenyl radicals. Product distribution was solvent dependent. A TEMPO adduct was isolated from the photoexcitation of 9‐fluorenol. An unusual unsymmetrical 3,9′‐bifluorenyl was observed from the photolysis of 9‐trifluoromethylfluorenol and 9,9′‐di(trifluoromethyl)‐9,9′‐bifluorenyl in more polar or hydrogen‐bonding solvents. The electronic nature of 9‐substituted fluorenyl radicals was probed using theoretical calculations showing the dipolar character of species with electron‐deficient groups. These constitute the first examples of “doubly destabilized” radicals.     

Antimicrobial nanocomposite films made of poly(lactic acid)–cellulose nanocrystals (PLA–CNC) in food applications—part B: effect of oregano essential oil release on the inactivation of Listeria monocytogenes in mixed vegetables

Antimicrobial nanocomposite films containing oregano essential oil (EO) were prepared by solvent casting. Film matrix was composed of supramolecular poly(lactic acid)–cellulose nanocrystals (PLA–CNC) nanocomposite. Bioactive PLA–CNC–oregano films were prepared by incorporating oregano EO as an antimicrobial agent. Resulting films were then converted into packaging applied on mixed vegetables as a food model and stored for 14 days at 4 °C to determine their antimicrobial capacity against Listeria monocytogenes, their physico-chemical/structural properties and their total phenols (TP) release during storage, in order to evaluate the effect of oregano EO. It was observed the addition of oregano EO did not affect the water vapor permeability (WVP) of films, but increased their elongation at break (Eb) and reduced their tensile strength (TS) and tensile modulus (TM) at day 0. However, TS, TM, Eb and WVP values of control and bioactive films were increased slightly after 14 days of storage. FTIR analysis allowed characterizing the molecular interactions of oregano EO with PLA–CNC matrix via the identification and interpretation of their respective vibration bands. Microbiological analysis of mixed vegetables inoculated with L. monocytogenes (3 log CFU g^?1) indicated that PLA–CNC–oregano films induced a quasi-total inhibition of bacteria in vegetables at day 14 and therefore demonstrated a strong antimicrobial capacity in situ. The percentage of TP release from bioactive films was determined by Folin–Ciocalteu’s method and results showed that TP release increased continuously from day 0 to day 14, up to 16.6 % at day 14. These results allowed demonstrating the strong antimicrobial capacity of PLA–CNC–oregano films for food packaging applications in vegetable produce.