A sensitive,specific method for the determination of tetraalkyllead compounds in air by gas chromatography/atomic absorption spectrometry

The development of a sensitive and specific method of determining individually the five tetraalkyllead compounds normally present in ambient air is described. The method is based on collection of the analytes on a porous polymer using a prefilter to destroy ozone and prevent decomposition of the sample during collection and storage. Two-stage thermal desorption, separation by gas chromatography and detection by modified flame atomic absorption spectrometry gives detection limits (3σ) of ca. 0.25 ng Pb m^?3 for tetramethyllead and 0.37 ng Pb m^?3 for tetraethyllead in an air sample of 80 dm³ collected over a 3–24 h period. Environmental sampling by this method in paralle with a wet chemical (iodine monochloride) method was used to validate the method. During the comparative study, higher organic lead levels were consistently found by the iodine monochloride method; it is postulated that this indicates the presence of vapour-phase tri-(or di)-alkyllead in excess of 1 ng Pb m^?3 in rural air. The versatility of the method is demonstrated by the results of atmospheric sampling at two locations, one rural and one at the kerbside in a city centre.     

Selective fluorometric detection of polyamines using micellar electrokinetic chromatography with laser-induced fluorescence detection

The polyamines putrescine, cadaverine, spermine and spermidine were separated and quantified by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection. The derivatization reagent, 1-pyrenebutanoic acid succinimidyl ester (PSE), allowed for the selective detection of the polyamines at 490 nm. Multiple labeling of the polyamines with PSE allows the formation of intramolecular excimers that emit at longer wavelengths (450-520 nm) than mono-labeled analytes (360-420 nm). Optimal separation of the labeled polyamines was achieved using a separation buffer consisting of 10 mM phosphate pH 7.2, 30 mM cholate, and 30% acetonitrile. Using these conditions, the four polyamines were separated in under 10 min. Limits of detection for putrescine, cadaverine, spermine and spermidine were 6, 5, 15 and 13 nM, respectively. These are superior or comparable to those previously reported in the literature using fluorescence detection.     

Thermal noise in Hg0.795Cd0.205Te detectors for large biasing fields

Thermal noise in Hg_0.795Cd_0.205Te detectors is estimated for large biasing fields at a lattice temperature of 77 K, by computing the correlation functions of the velocity fluctuations with the Monte Carlo technique. The noise temperature for current components transverse to the field is almost independent of the field, but that corresponding to the parallel component increases by a factor of about 1.3 at 50 V/cm and by a factor of 3.0 at 300V/cm. The thermal noise voltage for a detector of 85 resistance increases from 0.6nV/Hz^1/2 at low biasing fields to about 3nV/Hz^1/2 at a field of 300 V/cm. The noise power is also found to remain constant up to about 75 GHz, and it decreases thereafter by a factor of 0.25 for doubling of the frequency.     

Stereoselective reduction of arteannuin B and its chemical transformations

Absolute stereochemistry of dihydroarteannuin B 5 obtained by the reduction of arteannuin B 3 with Ni₂B, NaBH₄ or CdCl₂-Mg-MeOH-H₂O has been established by 2D NMR and single crystal X-ray diffraction studies. Some experiments aimed at the synthesis of dihydrodeoxyarteannuin B [C-4, 5 double bond isomer of 11] are also discussed.     

Differential thermal analysis studies on the kinetics of crystallization of calcium tungstate from solutions in sodium tungstate melts

The kinetics of calcium tungstate crystallization from solutions in sodium tungstate melts were studied in a platinum crucible by continuous cooling from an initial crystallization temperatureT ₀=800 to 1000 to below the eutectic temperature at cooling ratesR _T=0.67 to 3.3 min^–1. The main crystal growth was diffusion rate-controlled. The diffusion rate-constant (k _D) values for the growth along the major axis were estimated. Such values increased with the cooling rate and initial crystallization temperature. They were lower than those for diffusion-controlled growth of calcium tungstate from sodium tungstate melts in alumina crucibles. The experimentalk _D values were compared with the theoreticalk _D values.

---

Zusammenfassung Die Kinetik der Kristallisation von Calciumwolframat aus Lösungen von Natriumwolframatschmelzen wurde im Platintiegel durch kontinuierliches Kühlen von der AnfangskristallisationstemperaturT ₀=800 bis 1000 bis unter die eutektische Temperatur, bei Abkühlgeschwindigkeiten vonR _T =0.67 bis 3.3 min^–1, untersucht. Das Hauptkristallwachstum wurde durch die Diffusionsgeschwindigkeit bedingt. Die Werte der Diffusionsgeschwindigkeitskonstante (k _D) in Richtung der Hauptachse wurden geschÄtzt. Diese Werte nahmen mit der Abkühlgeschwindigkeit und der Anfangskristallisationstemperatur zu. Sie waren niedriger als jene des diffusionsbedingten Wachstums von Calciumwolframat aus Natriumwolframatschmelzen in Aluminiumtiegeln. Die experimentellenk _D-Werte wurden mit den theoretischenk _D-Werten verglichen.

---

Résumé La cinétique de la cristallisation du tungstate de calcium à partir de ses solutions dans le tungstate de sodium fondu a été étudiée dans un creuset de platine au cours du refroidissement continu depuis la température initiale de cristallisationT ₀=800 à 1000 C jusqu'à température inférieure à celle de l'eutectique, avec des vitesses de refroidissement allant de 0.67 à 3.3 C · min^–1. La croissance des cristaux est contrÔlée principalement par le processus de diffusion. Les valeurs de la constante de vitesse de diffusion (k _D) ont été estimées pour la croissance le long de l'axe principal. Ces valeurs augmentent avec la vitesse de refroidissement et la température initiale de cristallisation et sont plus faibles que les valeurs correspondantes en creusets d'alumine. Les valeurs expérimentales et théoriques dek _D sont comparées.

---

₀=800 1000 R =0.67 3.3 ^–1. . (k _d ) . . , - . k _d .

     

Oxomolybdenum(VI) and (IV) complexes of pyrazole derived ONO donor ligands – synthesis,crystal structure studies and spectroelectrochemical correlation

Four cis-dioxomolybdenum complexes of general formula [MoO₂(Lⁿ)EtOH] (n = 1–4) and one oxomolybdenum(IV) complex [MoO(L⁴)EtOH], with potentially tridentate Schiff bases derived from 5-methyl pyrazole-3-carbohydrazide and salicylaldehyde/substituted salicylaldehyde/o-hydroxy acetophenone have been prepared. The Mo(IV) complex is derived from the Mo(VI) dioxo complex by oxotransfer reaction with PPh₃. The complexes are characterized by elemental analysis, electronic spectra, IR, ¹H NMR, and by cyclic voltammetry. All the Mo(VI) species are crystallographically characterized. The complexes have a distorted octahedral structure in which the ligand behaves as a binegative donor one, leaving the pyrazole –N uncoordinated towards the metal center. It is also revealed from the crystal structure that the Mo(VI) center enjoys an NO₅ donor environment.     

Synthesis and biological activities of tetrahydroquinazoline analogs of aminopterin and methotrexate

(6R,6S)-5,8-Dideaza-5,6,7,8-tetrahydroaminopterin ( 1 ) and (6R,6S)-5,8-dideaza-5,6,7,8-tetrahydromethotrexate ( 2 ) were synthesized as potential inhibitors of dihydrofolate reductase (DHFR) and as antitumor agents. Cyclohexanone-4-carboxaldehyde dimethyl acetal, a key intermediate [10] was synthesized from cyclohexane-1,4-dione monoethylene ketal, which was converted via a Wittig reaction to its exocyclic 4-methylene derivative which in turn, was converted to the 4-aldehyde via a hydroboration-oxidation sequence. Selective protection of the 4-aldehyde as the dimethylacetal and cyclization with dicyandiamide afforded the 6-dimethylacetal of 2,4-diamino-5,6,7,8-tetrahydroquinazoline. Protection of the 2,4-diamino moieties and selective deprotection of the 6-aldehyde followed by reductive amination with p-aminobenzoyl-L-glutamate afforded 2,4-bisacetamido-5,8-dideaza-5,6,7,8-tetrahydroaminopterin ( 11 ). Deprotection of 11 afforded 1 . Compound 2 was obtained from 11 via N¹⁰-methylation and deprotection. The N¹⁰-methyl analogue 2 was 2–10 fold more potent than 1 as an inhibitor of various DHFRs. In the in vitro preclinical screening program of the National Cancer Institute, compound 2 inhibited the growth of eighteen of the twenty nine tumor cell lines in culture at a GI₅₀ > 1.0 × 10^?8 M.     

Quadruplex formation by a guanine-rich PNA oligomer

A guanine-rich PNA dodecamer having the sequence H-G4T4G4-Lys-NH2 (G-PNA) hybridizes with a DNA dodecamer of homologous sequence to form a four-stranded quadruplex (Datta, B.; Schmitt, C.; Armitage, B. A. J. Am. Chem. Soc. 2003, 125, 4111-4118). This report describes quadruplex formation by the PNA alone. UV melting curves and fluorescence resonance energy transfer experiments reveal formation of a multistranded structure stabilized by guanine tetrads. The ion dependency of these structures is analogous to that reported for DNA quadruplexes. Electrospray ionization mass spectrometry indicates that both dimeric and tetrameric quadruplexes are formed by G4-PNA, with the dimeric form being preferred. These results have implications for the use of G-rich PNA for homologous hybridization to G-rich targets in chromosomal DNA and suggest additional applications in assembling quadruplex structures within lipid bilayer environments.     

Multi-choice stochastic transportation problem involving extreme value distribution

In this paper a multi choice stochastic transportation problem is considered where the supply and demand parameters of the constraints follow extreme value distribution. Some of the cost coefficients of the objective function are multi-choice type. At first all the probabilistic constraints are transformed into deterministic constraints. Further using the binary variables, multi-choice type cost coefficients are handled. Then the transformed problem is considered as a deterministic multi-choice transportation problem. Finally, a numerical example is presented to illustrate the solution procedure.