Use of deuterium–hydrogen exchange to characterize the fragmentation pathways of arteether and its metabolites in a thermospray mass spectrometer

Whereas the thermospray mass spectra of most compounds consist of only the pseudo-molecular ion with little fragmentation, the thermospray mass spectra of arteether (a cyclic endoperoxide) and its metabolites are relatively complex. Assignments of structures to individual fragments from normal spectra was particularly ambiguous because of uncertainties as to which fragments arose from ammonium ion or methanol adducts. In this study, these assignments could be resolved through the comparison of the regular spectrum with the deuterium-exchange spectrum (in an ND₄O₂CCH₃–CD₃OD–D₂O mobile phase) achieved using ‘sandwiched slug’ injection technique. The mass spectra of arteether and four of its metabolites all showed [M + ND₄]⁺ pseudo-molecular ions with greater than 91% H/D exchange, indicating a high efficiency with a minimal use of deuterated mobile phase. Most fragments showed H/D exchange rates in the 70–90% range and the isotope shift of individual spectral lines (ΔM) was found to be extremely useful in determining the structure of the fragment.     

Synthetic, structural and spectroscopic studies of (pseudo)halo(1,3-di-tert-butylimidazol-2-ylidine)gold complexes

A series of (pseudo)halo(1,3-di-tert-butylimidazol-2-ylidine)gold complexes [(But2Im)AuX](X = Cl, Br, I, CN, N3, NCO, SCN, SeCN, ONO2, OCOCH3, CH3) have been synthesized and characterised spectroscopically and structurally. 13C NMR chemical shifts for the carbene carbon vary widely with differing ancillary anion, correlating well with the sigma-donor ability of the latter and with the M-C(carbene) bond distance. These results reinforce the notion that N-heterocyclic carbene ligands are primarily sigma-donor ligands with little pi-acceptor ability.     

An electron microscopic and enzymic study of rat liver peroxisomal nucleoid core and its association with urate oxidase

The appearance of the characteristic crystalloid core of rat liver peroxisomes is emulated by the electron microscopic (EM) appearance of highly purified urate oxidase prepared from the same tissue. The purity of the enzyme preparation was established by gel electrophoresis under various conditions and the specific enzyme activity was at least as high as any previously reported. The amino acid composition of urate oxidase was determined. As additional evidence for close association of the peroxisomal core with urate oxidase, it was demonstrated that the biphasic changes in rat liver urate oxidase activity in response to prolonged starvation were paralleled by changes in the EM appearance of peroxisomes. Under comparable conditions catalase, another peroxisomal enzyme, did not show the same changes in activity as did urate oxidase. Evidence for the possible identity of urate oxidase with the peroxisomal crystalloid of rat liver has been presented, all materials having been obtained from, and experiments performed with, the rat.     

Oxidation reactions of an anionic gallium(I) N-heterocyclic carbene analogue with group 16 compounds

The reactivity of an anionic gallium(I) heterocycle, [K(tmeda)][:Ga([N(Ar)C(H)]2)], Ar = C6H3Pr(i)2-2,6, towards sources of elemental chalcogens and diorgano-dichalcogenides has been investigated and comparisons drawn with the reactivity of the valence isoelectronic N-heterocyclic carbene class of ligand. The reactions of the heterocycle with N2O or (Te)PEt3 yielded the dimeric, dianionic gallium(III) complexes, [K(L)]2[(mu-E)Ga([N(Ar)C(H)]2)]2, E = O, L = tmeda; E = Te, L = THF. Treatment of [K(tmeda)][:Ga([N(Ar)C(H)]2)] with the diphenyl dichalcogenides, PhEEPh, E = Se or Te, gave the one dimensional polymer, [K[(PhSe)2Ga([N(Ar)C(H)]2)]]infinity and the monomeric complex, [K(OEt2)3][(PhTe)2Ga([N(Ar)C(H)]2)], respectively. The X-ray crystal structures of the four complexes are reported.     

Syntheses of 3,7-dimethylpentadecan-2-ols from intermediates formed from co-oligomerisation reactions of butadiene with diethyl malonate and acetaldehyde

The products of the reaction of butadiene with diethyl malonate catalysed by a palladium complex and of butadiene with acetaldehyde catalysed by a nickel(0) complex have been used in two syntheses of 3,7-dimethylpentadecan-2-ol.     

Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

Formation of carbon oxides during tobacco combustion: Pyrolysis studies in the presence of isotopic gases to elucidate reaction sequence

During the combustion of tobacco, carbon monoxide is formed by the thermal decomposition of tobacco with primary products such as carbon dioxide and water. These three processes occur in parallel and are interdependent. The temperature ranges over which each process occurs, and their relative importance have been assessed by pyrolysing tobacco in the presence of various isotopically labelled gases. Non-isothermal pyrolyses were conducted at a heating rate of 1.6 K s^?1 up to 1000°C, with the products analysed by mass spectrometer.Pyrolysis in the presence of oxygen-18 indicates that combustion of tobacco starts at 180°C. Carbon dioxide and water are formed by combustion at 180°C, while carbon monoxide is not formed as a combustion product until 460°C. The quantities of carbon monoxide and dioxide formed by thermal decomposition of tobacco above 400°C are significantly reduced by the occurrence of combustion.Pyrolysis in the presence of carbon-13 dioxide or carbon dioxide-18 shows that its major reaction, endothermic reduction to form carbon monoxide begins at 450°C. Pyrolysis in an oxygen-18/carbon-13 dioxide atmosphere has shown that this endothermic reduction of carbon dioxide occurs in parallel with the strongly exothermic oxidising reactions. 30% of the total carbon monoxide formed was produced by thermal decomposition of the tobacco. 36% was produced by combustion of the tobacco, and at least 23% was produced via carbon dioxide. The remainder was produced by an interaction of the carbon dioxide reduction and the oxidation. Similar proportion would be expected inside the reaction zone of a burning cigarette.Pyrolysis in the presence of heavy water has shown that the major reaction of the water is to quantitatively produce carbon monoxide and hydrogen above 600°C. Considerable isotopic exchange reactions also occur. Pyrolysis in the presence of carbon monoxide-18 has shown that carbon monoxide reacts with tobacco to a small extent at temperatures above 220°C mainly to abstract oxygen combined in the tobacco and produce carbon dioxide.A sequence of general chemical steps for the production of the carbon oxides and water during tobacco combustion has been deduced. This is based on the present work together with considerations of previously published studies on graphite and coal reactions.     

Correlation between the fluorescent response of microfluidity probes and the water content and viscosity of ionic liquid and water mixtures

Accurate data on transport properties such as viscosity are essential in plant and process design involving ionic liquids. In this study, we determined the absolute viscosity of the ionic liquid + water system at water mole fractions from 0 to 0.25 for three 1-alkyl-3-methylimidazolium ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide. In each case, the excimer to monomer ratio for 1,m-bis(1-pyrenyl)alkanes (m= 3 or 10) was found to increase linearly with the mole fraction of water. Of the probes studied only PRODAN and rhodamine 6G, both of which have the ability to participate in hydrogen bonding, exhibited Perrin hydrodynamic behavior in the lower viscosity bis(trifluoromethane sulfonyl)imides. As a result, these probes allow for the extrapolation of the absolute viscosity of the ionic liquid mixture from the experimental fluorescence steady-state polarization values.     

Strategy of analysis for the estimation of the bioavailability of zinc in foodstuffs

After the application of simulated digestive fluids (gastric and intestinale fluid) as extraction solutions, AAS and differential pulse anodic-stripping voltammetry (DPASV) were used as analytical methods in combination with ion-exchange procedures for the determination of zinc species and total zinc contents. The ion exchange procedure and the shifting of electrochemical potentials as well as changes of the calibration slope after standard addition in the polarographic analysis allowed discriminating statements with regard to a possible resorption of zinc. On the basis of these methods, a strategy is presented for in vitro investigations of the bioavailability of zinc in foodstuffs.     

A systematic nomenclature for cascade polymers

Cascade (dendritic) polymers are discrete, highly branched, monodisperse polymers that possess branching patterns described by a mathematical progression. A systematic nomenclature that accurately represents these molecules is described. © 1993 John Wiley & Sons, Inc.