Rapid determination of microorganisms using a flow-injection system

An automated method for the rapid determination of microorganisms using a flow-injection system is presented. Electrochemical measurement of a mediator reduced by microbial metabolism allowed the determination of fungi and bacteria in a few minutes. The lowest detection limit was 5 × 10⁶ colony-forming units (cfu) ml^?1 for Escherichia coli. Correlation between the flow-injection method and standard microbiological methods was excellent (r = 0.997, n = 4 for Beauveria bassiana; r = 0.997, n = 7 for E. coli). The flow-injection system was applied to the on-line control of an E. coli cultivation.     

Analysis of proteins from a glioma cell line by using micro-scale solution isoelectric focusing in combination with liquid chromatography/tandem mass spectrometry

In this study we have investigated whether micro-solution isoelectric focusing (microsol-IEF) can be used as a pre-fractionation step prior to liquid chromatography/tandem mass spectrometry (LC/MS/MS) and if extensive sample purification of the different fractions is required. We found that, in spite of the high concentrations of buffer and detergents, no clean up of the digested microsol-IEF fractions was necessary before analysis by LC/MS/MS. We also concluded that it is possible to identify at least twice as many proteins in a glioma cell lysate with the combination of microsol-IEF and LC/MS/MS than with LC/MS/MS alone. Furthermore, most of the proteins that were identified from one microsol-IEF fraction by using analytical narrow-range two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) and peptide mass fingerprinting with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) were also identified by LC/MS/MS. Finally, we used the combination of microsol-IEF and LC/MS/MS to compare two sample preparation methods for glioma cells and found that several nuclear, mitochondria, and endoplasmic reticulum proteins were only present in the sample that had been subjected to lipid extraction by incubating the homogenized cells in chloroform/methanol/water.     

Metal- and ligand-directed one-pot syntheses,crystal structures,and properties of novel oxo-centered tetra- and hexametallic clusters

Starting from closely related metal-ligand combinations, completely different oligomeric metal clusters are synthesized. Whereas, picoline-tetrazolylamide HL(1) (1) and zinc or nickel acetate afforded [2x2] grids [M(4)(L(1))(8)] (2), slightly different N-(2-methylthiazole-5-yl)-thiazole-2-carboxamide HL(2) (5 a) and nickel acetate yielded the monometallic complex [Ni(L(2))(2)(OH(2))(2)] (6). In contrast, reaction of 5 a with zinc acetate produced the tetrametallic zinc cluster [Zn(4)O(L(2))(4)(OAc)(2)] (7). Even more surprising, when 3-methyl-substituted HL(3) (5 b) instead of 2-methyl-substituted HL(2) (5 a) was allowed to react under identical conditions with zinc acetate, the cluster [Zn(4)O(L(3))(4)Cl(2)] (8) crystallized from dichloromethane. Clusters 7 and 8 are isostructural. As for 7, in 8 two of the edges of the tetrahedron of zinc ions are doubly bridged, two are singly bridged, and the other two are nonbridged. On the other hand, when iron(II) acetate under aerobic conditions was allowed to react with 5 a, the unprecedented complex [[Fe(3)O(L(2))(2)(OAc)(4)](2)O] (9) was isolated. Cluster 9 is composed of two trimetallic, triangular mu(3)-O(2-)-centered [Fe(3)O(L(2))(2)(OAc)(4)](+) modules, linked by an almost linear mu(2)-O(2-) bridge. The M?ssbauer spectrum together with cyclic voltammetric and square-wave voltammetric measurements of 9 are reported, and 6-9 were characterized unequivocally by single-crystal X-ray structure analyses.     

Aurophilicity-coordination interplay in the design of cyano-bridged nickel(II)-Gold(I) bimetallic assemblies: structural and computational studies of the gold(I)-gold(I) interactions

Two polymorphic cyano-bridged Au(I)-Ni(II) bimetallic complexes of formulas [Ni(en)2Au(CN)2][Au(CN)2] (1) and [Ni(en)2[Au(CN)2]2] (2) have been prepared from the 1:2 reaction between [Au(CN)2]- and either [Ni(en)2Cl2]Cl or [Ni(en)3]Cl2.2H2O, respectively. The structure of 1 consists of polymeric cationic chains of alternating [Au(CN)2]- and [Ni(en)2]2+ units running along the a axis and [Au(CN)2]- anions lying between the chains. The noncoordinated dicyanoaurate anions are aligned perpendicular to the ac plane and involved in aurophilic interactions with the bridging dicyanoaurate groups, ultimately leading to a 2D bimetallic grid. The structure of 2 consists of trinuclear molecules made of two [Au(CN)2]- anions linked to [Ni(en)2]2+ unit in trans configuration. Trinuclear units are joined by aurophilic interactions to form 1D zigzag chains. The magnetic properties of these compounds are strongly dominated by the local anisotropy of the octahedral Ni(II) ions, thus indicating that the magnetic exchange interaction mediated by dicyanoaurate bridging groups, if it exists, is very weak. To get insight into the electronic properties of the inter- and intramolecular interactions of the [Au(CN)2]- building blocks, the structures of different aggregates of dicyanogold units were optimized and then analyzed by making use of atoms-in-molecules (AIM) theory. Moreover, bond indices were calculated by methods based upon nonlinear population analysis.     

Acid-base properties of xanthosine 5'-monophosphate (XMP) and of some related nucleobase derivatives in aqueous solution: micro acidity constant evaluations of the (N1)H versus the (N3)H deprotonation ambiguity

The first acidity constant of fully protonated xanthosine 5'-monophosphate, that is, of H3(XMP)+, was estimated by means of a micro acidity constant scheme and the following three deprotonations of the H2(XMP)+/- (pKa=0.97), H(XMP)- (5.30), and XMP2- (6.45) species were determined by potentiometric pH titrations; further deprotonation of (XMP-H)3- is possible only with pKa>12. The most important results are that the xanthine residue is deprotonated before the P(O)2(OH)- group loses its final proton; that is, twofold negatively charged XMP carries one negative charge in the pyrimidine ring and one at the phosphate group. Micro acidity constant evaluations reveal that this latter mentioned species occurs with a formation degree of 88 %, whereas its tautomer with a neutral xanthine moiety and a PO3(2-) group is formed only to 12 %; this distinguishes XMP from its related nucleoside 5'-monophosphates, like guanosine 5'-monophosphate. At the physiological pH of about 7.5 mainly (XMP-H)3- exists. The question, which of the purine sites, (N1)H or (N3)H, is deprotonated in this species cannot be answered unequivocally, though it appears that the (N3)H site is more acidic. By application of several methylated xanthine species intrinsic micro acidity constants are calculated and it is shown that, for example, for 7-methylxanthine the N1-deprotonated tautomer occurs with a formation degree of about 5 %; a small but significant amount that, as is discussed, may possibly be enhanced by metal ion coordination to N7, which is known to occur preferably to this site.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Syntheses and PE-Spectroscopic Investigations of 2,6- and 3,5-Bridged 1,4-Dimethylidenecyclohexanes

Three 1,4-dimethylidenecyclohexanes, bridged in the 2,6- and 3,5-positions by two ethano ( 4 ), one ethano and one propano ( 5 ), and two propano bridges ( 6 ) have been synthesized. The interaction of the two exocyclic methylidene groups has been investigated by He(I) photoelectron (PE) spectroscopy. It revealed a slightly larger energy difference (0.8 eV) for 4 and 5 as compared to the parent 1,4-dimethylidenecyclohexane ( 7 ) (0.7 eV). The interpretation of the PE spectra was based on the comparison with PE data of related systems and with the results of semiempirical calculations on 4–6 .