The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Physical Analysis of a Possibility to Reach the 1.30-μm Emission from the GaAs-Based VCSELs with the InGaAs/GaAs Quantum-Well Active Regions and the Intentionally Detuned Optical Cavities

Physical aspects of an operation of the GaAs-based InGaAs/GaAs quantum-well (QW) VCSELs with the intentionally detuned optical cavities have been considered in the present paper using the comprehensive three-dimensional self-consistent optical–electrical–thermal-gain simulation. In GaAs-based structures, very good DBR resonator mirrors and a very efficient methods to confine radially both the current spreading and the electromagnetic field with the aid of oxide apertures may be applied. It has been found using the above simulation that even currently available immature technology enables manufacturing the above devices emitting radiation of wavelengths over 1.20 μm. In particular, while the room-temperature 1.30-μm lasing emission is still beyond possibilities of the InGaAs/GaAs QW VCSELs, these structures may offer analogous 1.25-μm emission, especially for the high-power and/or high-temperature operation.     

On Two Measures of Problem Instance Complexity and their Correlation with the Performance of SeDuMi on Second-Order Cone Problems

We evaluate the practical relevance of two measures of conic convex problem complexity as applied to second-order cone problems solved using the homogeneous self-dual (HSD) embedding model in the software SeDuMi. The first measure we evaluate is Renegar's data-based condition measure C(d), and the second measure is a combined measure of the optimal solution size and the initial infeasibility/optimality residuals denoted by S (where the solution size is measured in a norm that is naturally associated with the HSD model). We constructed a set of 144 second-order cone test problems with widely distributed values of C(d) and S and solved these problems using SeDuMi. For each problem instance in the test set, we also computed estimates of C(d) (using Peña’s method) and computed S directly. Our computational experience indicates that SeDuMi iteration counts and log (C(d)) are fairly highly correlated (sample correlation R = 0.675), whereas SeDuMi iteration counts are not quite as highly correlated with S (R = 0.600). Furthermore, the experimental evidence indicates that the average rate of convergence of SeDuMi iterations is affected by the condition number C(d) of the problem instance, a phenomenon that makes some intuitive sense yet is not directly implied by existing theory.     

Enhanced cleaning of photoresist film on a transparent substrate by backward irradiation of a Nd:YAG laser

Laser cleaning of a photoresist (PR) on a glass substrate using ns-pulsed Nd:YAG laser was studied. The direction of the substrate facing the laser beam was varied as a main parameter as well as the power of the laser beam. The backward irradiation (BWI) of the third harmonic beam (355 nm) completely removed 1.2 μm thick PR layer with three pulses at 1.5 J/cm² leaving no residues behind; while the forward irradiation (FWI) at the same condition just partially cleaned it. To investigate the difference of removal mechanisms between irradiation directions, the size distributions of particulates generated during laser cleaning were observed using an optical particle counter. The concentration of micron-sized particulates increased with increasing laser fluence up to 1 J/cm² for FWI and 0.5 J/cm² for BWI and then decreased at higher fluences because the target was a very thin film. The concentration of larger particulates for BWI was much higher than that for FWI implying the difference in removal mechanisms. In consideration of the size characteristics of the particulates and the temperature profiles of the PR layer, the most probable distinct mechanism for the BWI would be a blasting due to high temperature at the PR/glass interface. The particulate number concentration decreased rapidly after the completion of cleaning, suggesting that the measurement of the particulate concentration could detect the progress of the cleaning. Our results demonstrated that the backward irradiation will be useful for the laser cleaning of film-type contaminants on an optically transparent substrate.     

Formation of Fe i –B pairs in silicon at high temperatures

We report on the detection of Fe _i –B pairs in heavily B doped silicon using ⁵⁷Fe emission Mössbauer spectroscopy following implantation of radioactive ⁵⁷Mn⁺ parent ions (T _1/2?=?1.5 min) at elevated temperatures >?850 K. The Fe _i –B pairs are formed upon the dissociation of Fe _i –V pairs during the lifetime of the Mössbauer state (T _1/2?=?100 ns). The resulting free interstitial Fe_i diffuses over sufficiently large distances during the lifetime of the Mössbauer state to encounter a substitutional B impurity atom, forming Fe _i –B pairs, which are stable up to ～1,050 K on that time scale.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Effects of ground-state correlations on 2νββ decay rates and limitations of the QRPA approach

Half-lives of the 2νββ decay are calculated in the proton-neutron QRPA for⁷⁶Ge,⁸²Se,¹⁰⁰Mo,^128,130Te,¹³⁶Xe and¹⁵⁰Nd. The strength of the particle-particle interaction, which plays a decisive role for a reliable evaluation of the half-lives, is determined from a QRPA calculation of singleβ ⁺ decays. The 2ν decay rates calculated with the interaction strength fitted in this way are strongly suppressed and found to be consistent with the existing experimental data. Effects of the ground-state correlations on the suppression are investigated. On the other hand, the present calculation indicates limitations of the QRPA approach.     

Oil Migration in Chocolate

Oil migration in filled chocolates limits shelf life due to texture changes and loss of visual appeal. Spatial and temporal oil concentration changes of a two-layer chocolate and peanut butter filling system, which models a filled chocolate, were monitored by magnetic resonance imaging. Formulations of chocolate varied with respect to particle size, milk fat content and emulsifier level. Sorption-time experimental data was used to establish the best fit diffusion coefficient for a Fickian diffusion model. On the basis of the comparison of spatial experimental data to the model, Fickian diffusion alone does not account for oil migration. Authors' address: Michael J. McCarthy, Department of Food Science and Technology, University of California, One Shields Avenue, Davis, CA 95616, USA     

Synergetic information versus Shannon information in self-organizing systems

We discuss how synergetic information, i.e. the compressed Shannon information of the order parameters, which is produced by the cooperativity of the system, can be determined experimentally, especially in fluids.