Rice Bran as an Excellent Sorbent for Heavy Metals from Aqueous Media, 1. Optimization of Conditions

In this two‐part report, the efficiency of rice bran in removal of heavy metals such as cadmium, lead, zinc, nickel, copper and iron(III) from aqueous solution is investigated. The different experimental conditions such as pH, temperature, volume of solution, bran amount, particle size, exchange time, stirring speed, etc. are studied, and the optimum conditions are selected in part 1 of this series of reports. The efficiency of bran in removal of heavy metals is presented with and without treatments. For treatment, heat or acid, alkali and salt solutions were used. The results obtained show that after treating with saturated sodium chloride solution, its efficiency for Ni²⁺ and Zn²⁺ improves. At pH 5, all studied cations have recoveries more than 93% (lead and cadmium 100%). The exchange speed is very high and has preference over the classical ion exchangers.     

Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead

A novel selective membrane electrode for determination of ultra-trace amount of lead was prepared. The PVC membrane containing N,N′-dimethylcyanodiaza-18-cown-6 (DMCDA18C6) directly coated on a graphite electrode, exhibits a Nernstian response for Pb²⁺ ions over a very wide concentration range (from 1.0×10⁻² to 1.0×10⁻⁷ M) with a limit of detection of 7.0×10⁻⁸ M (∼14.5 ppb). It has a fast response time of ∼10 s and can be used for at least 2 months without any major deviation in potential. The electrode revealed very good selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions. The proposed sensor was used as an indicator electrode in potentiometric titration of lead ions and in determination of lead in edible oil, human hair and water samples. The proposed sensor was found to be superior to the best Pb²⁺-selective electrodes reported in terms of detection limit and selectivity coefficient.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

One-pot Three-component Condensation Reactions in Water. An Efficient and Improved Procedure for the Synthesis of Furan Annulated Heterocycles

Summary. The environment-friendly one-pot three-component condensation reactions of 4-hydroxycoumarin or 4-hydroxy-6-methylpyrone, p-substituted benzaldehyde, and alkyl or aryl isocyanides to afford furocoumarines or furopyranones in water in good yields after about one hour at 75°C are reported.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

New computer program to calculate the symmetry of molecules

In this paper we, present some MATLAB and GAP programs and use them to find the automorphism group of the Euclidean graph of the C₈₀ fullerence with connectivity and geometry of I _h symmetry point group. It is proved that this group has order 120 and is isomorphic to I _h ≊Z₂×A₅, where Z₂ is, a cyclic group of order 2 and A₅ is the alternating group on five symbols.     

Die Reaktion von Tellurhexafluorid mit Trimethylamin,Strukturen der TeF5−- und SeF5−-Anionen

Reaction of Telluriumhexafluoride and Trimethylamine, Structures of the TeF₅^? and SeF₅^? Anions The reaction of TeF₆ and (CH₃)₃N is of the redox kind, resulting in reduction of tellurium: X-ray single crystal analysis reveals the compounds (CH₃)₂N? CH₂? N(CH₃)₂⁺TeF₅^? and [(CH₃)₃NH⁺]₅(TeF₅^?)₃(HF₂^?)₂. By comparison with published data it can be shown that this mixture is identical to previously published [(CH₃)₃N]₂TeF₆. The latter was supposed to be one of the few examples of tellurium in a coordination state of eight. (CH₃)₄N⁺TeF₅^? and (CH₃)₄N⁴SeF₅^? are obtained and their structure is investigated by single crystal x-ray methods also. The anions SF₅^?, SeF₅^? and TeF₅^? are discussed in terms of weak interactions.     

A novel one-pot synthesis of some new interesting pyrrole derivatives

[reaction: see text] 11-(1H-Pyrrol-1-yl)-11H-indeno[1,2-b]quinoxaline and 3-(1H-pyrrol-1-yl)indolin-2-one derivatives have been synthesized in good yields in a novel, one-pot, and efficient process by condensation of 11H-indeno[1,2-b]quinoxalin-11-one or isatin derivatives with 4-hydroxyproline on solid-support montmorillonite K10 under microwave irradiation.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.