Simultaneous determination of seven prohibited substances in cosmetic products by liquid chromatography-tandem mass spectrometry

In this paper,we developed and validated a simple,sensitive,and selective high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) method to identify and measure the following prohibited substances that may be found in cosmetic products:minoxidil,hydrocortisone, spironolactone,estrone,canrenone,triamcinolone acetonide and progesterone.Chromatographic separation was performed on a Waters Symmetry C18(100 mm×2.1 mm,3.5μm particle size) with a gradient elution system composed of 0.2%(v/v) formic acid aqueous solution and methanol containing 0.2%(v/v) formic acid at a flow rate of 0.3 mL/min.The substances were detected using a triple quadrupole mass spectrometer in the multiple reaction monitoring mode with an electrospray ionization source.All of the calibration curves showed good linearity(r > 0.999) within the tested concentration ranges.The limit of detection was <25 pg.The relative standard deviations for intraday precision for each of the prohibited substances were <3.5%at two concentration levels(2μg/g,10μg/g). The relative recovery rate for each of the prohibited substances ranged from 91.8%to 111%at three concentration levels(0.1μg/g,2μg/g,10μg/g),including the limit of quantification.In conclusion,we have developed and validated a method that can identify seven prohibited substances in cosmetic products.     

Continuous Detection of pH‐responsive Drug Delivery System in Cells in situ by Confocal Laser Scanning Microscopy

Mesoporous silica nanoparticles (MSN) were coated by pH‐responsive polymer chitosan‐poly (methacrylic acid) (CS‐PMAA). This nano drug delivery system showed good application prospects and the polymer‐coated microspheres were promising site‐specific anticancer drug delivery carriers in biomedical field. A continuous detection of pH‐responsive drug delivery system in cells in situ, utilizing MSN/CS‐PMAA composite microspheres, was proposed. Two kinds of different cell lines, tumor cell line (Hela) and normal somatic cells (293T), were used to investigate the behaviours of the drug loaded system in the cells. Conclusions could be drawn from the fluorescent images obtained by confocal laser scanning microscopy (CLSM), modified drug‐loaded microspheres (MSN/CS‐PMAA) were ingested into cells more easily, the uptake of DOX@FITC‐MSN/CS‐PMAA by HeLa/293T cells were performed at pH 7.4/pH 6.8, DOX was released during the ingestion process, fluorescence intensity decreased with time because of efflux transport and photo‐bleaching. Fluoresence detection by flow cytometry was performed as comparison. The continuous fluorescent observation in situ could be widely used in the pH‐responsive releasing process of drug delivery system in the cells.     

IPET:测定独个生物大分子三维空间结构的实验方法

蛋白质的动态特性和结构活性对于蛋白质功能的调控具有根本意义。传统的结构确定方法(包括X射线和电子显微镜单颗粒分析技术等)往往需要成千上万不同蛋白质分子的平均信号,因此难以确定蛋白质分子的动态结构。而电子显微断层成像技术是一种对独个生物个体结构从不同的观测角度照相、并计算来恢复该个体的三维结构密度图的方法。传统的冷冻电子断层成像重构方法采用整个大尺寸电镜图像进行重构计算,通常用来研究细菌、细胞切片等大尺寸生物个体在较低分辨率下的结构;由于分辨率的限制,不足以获得小尺寸的蛋白质分子的结构细节。最近,任罡研究小组提出一种独个生物颗粒的电子显微断层成像方法(individual-particle electron tomography,IPET)。该方法通过减小图像尺寸(直至所选区域只包含单个蛋白质分子)的策略,运用提出的FETR(focused electron tomography reconstruction)算法来提高独个大分子重构的分辨率。此方法不需要初始模型和大量分子的平均信号,同时能够容忍一定的测角误差。本文综述了IPET/FETR方法在确定独个分子结构过程中的具体步骤以及如何应用该方法来研究蛋白动态特性和结构变化特征。期望通过该综述和国内同行交流,分享最新的前沿研究,为赶超世界科技前沿的建设添砖加瓦。     

Two Bisupporting Keggin-Type POM-Based Hybrids Decorated by [Zn(phen)2]2+ Fragments

Two bisupporting Keggin-type polyoxoanion-based hybrids decorated by [Zn(phen)₂]²⁺ complexes, [Zn(phen)₂]₂(PW ₁₁ ^VI W^VO₄₀) (1) and K[Zn(phen)₂(H₂O)]₂(OH) (SiW₁₂O₄₀)·H₂O (2) (phen = 1,10′-phenanthroline), have been hydrothermally synthesized, and characterized by elemental analysis, IR spectra, UV–Vis spectrum, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, and single-crystal X-ray diffraction. The structural analyses reveal that compound 1 consists of a 0D bisupporting Keggin-type heteropoly blue cluster obtained by using reductant glucose, which is grafted by two [Zn(phen)₂]²⁺ fragments; compound 2 presents a 1D infinite chain, which is constructed from bisupporting [SiW₁₂O₄₀]^4? polyoxoanions decorated by [Zn(phen)₂(H₂O)]²⁺ fragments and K⁺ ions. Additionally, the electrochemical behaviors of two compounds were studied.     

The non-covalent bindings of CF2Cl2 with NO and SO2

Ab initio calculations have been performed on the complexes of CF₂Cl₂ with NO and SO₂, and a set of stable configurations for CF₂Cl₂–NO and CF₂Cl₂–SO₂ were found with no imaginary frequencies by the MP2 method. In addition, the binding energy and the NBO analysis were used to evaluate the relative stability of the complexes. The calculated results indicate that the weak interactions in the CF₂Cl₂–NO and CF₂Cl₂–SO₂ systems involved are enhanced with the increase of the number of non-covalent bonds. Further studies predict that the CF₂Cl₂–SO₂ system may play a more important role than the CF₂Cl₂–NO system in environmental problem because the former offers a stronger interaction than the latter. Furthermore, the non-covalent binding interactions of Cl···N and Cl···O for CF₂Cl₂–NO system, Cl···O, Cl···S and F···S for CF₂Cl₂–SO₂ system, are the dominant forces, which seem to be very significant as a driving force influencing the arrangement of molecules, especially in CF₂Cl₂–SO₂ system.     

An on‐line sample pretreatment technique for the HPLC analysis of plant samples

A continuous‐flow, on‐line sample pretreatment technique using a silica gel microsyringe extractor has been developed. All steps including extraction, separation, clean‐up, and concentration occur in the microsyringe. The overall sample pretreatment process takes <10 min per sample. Different polarity chemicals in the plant sample are successively extracted and separated, and analyzed in parallel using HPLC–UV and HPLC–UV–MS/MS. Polycyclic aromatic hydrocarbons, alkylphenols, and plant hormones were determined as model compounds for nonpolar, intermediate polarity, and polar fractions, respectively. All the parameters that influence the extraction and separation efficiency of the microsyringe extractor have been optimized and evaluated. Under the optimized conditions, recoveries of target compounds ranged from 78.4 to 101.9%, the RSD was <12.8% and the square of the correlation coefficient was >0.99. Complex plant samples of Sambucus Mandshurica Kitag have been tested using this method. Fluorene, phenanthrene, pyrene, and plant hormones were detected in all the samples, and concentrations ranged from 24.2–34.9, 43.8–67.1, 25.9–29.2, and 14.5～110.8 ng/g, respectively.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

Uncommon perspectives in palladium- and copper-catalysed arylation and heteroarylation of terminal alkynes following Heck or Sonogashira protocols: Interactions copper/ligand,formation of diynes,reaction and processes in ionic liquids

Conjugated alkynes are recurring building blocks in natural products and in a wide range of important compounds, such as pharmaceuticals, agrochemicals, or molecular materials. The palladium-catalysed cross-coupling reaction between the sp²-hybridized carbon atoms of aryl, heteroaryl, and vinyl halides with the sp-hybridized carbon atoms of terminal alkynes is one of the most important developments in the field of alkyne chemistry over the past 50 years. Room for improvement still exists in these important reactions of direct arylation of terminal alkynes. In this prospect, the present authors have developed several strategies aiming at improving the reactivity, the selectivity, and several aspects of processes involving the palladium-catalysed alkyne arylation and heteroarylation reactions, in relation with sustainable chemistry. Various original approaches have thus been adopted: (i) the development of catalytic systems efficient at low metal loading below 1 mol% of palladium and copper (to reduce metal contamination) from polydentate ligands chemistry, (ii) the limitation of diyne formation by undesired side-reaction, this from a better mechanistic understanding and the innovating use of copper adducts, (iii) and the development of cost-efficient catalytic reactions in ionic liquid solvents. These topics have been developed with the general outlook of a large scope in organic synthesis. In addition, the investigation of recycling opportunities and the unprecedented production of extendedly conjugated bis(aryl)diynes has been also achieved. The present account reviews all this work, as it has been presented by the corresponding author at GECOM–CONCOORD 2012 as recipient of the 2012 European journal of Inorganic Chemistry Young Investigator Award.     

Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.