Experimental and DFT studies of the conversion of ethanol and acetic acid on PtSn-based catalysts

Reaction kinetics studies were conducted for the conversions of ethanol and acetic acid over silica-supported Pt and Pt/Sn catalysts at temperatures from 500 to 600 K. Addition of Sn to Pt catalysts inhibits the decomposition of ethanol to CO, CH4, and C2H6, such that PtSn-based catalysts are active for dehydrogenation of ethanol to acetaldehyde. Furthermore, PtSn-based catalysts are selective for the conversion of acetic acid to ethanol, acetaldehyde, and ethyl acetate, whereas Pt catalysts lead mainly to decomposition products such as CH4 and CO. These results are interpreted using density functional theory (DFT) calculations for various adsorbed species and transition states on Pt(111) and Pt3Sn(111) surfaces. The Pt3Sn alloy slab was selected for DFT studies because results from in situ (119)Sn M?ssbauer spectroscopy and CO adsorption microcalorimetry of silica-supported Pt/Sn catalysts indicate that Pt-Sn alloy is the major phase present. Accordingly, results from DFT calculations show that transition-state energies for C-O and C-C bond cleavage in ethanol-derived species increase by 25-60 kJ/mol on Pt3Sn(111) compared to Pt(111), whereas energies of transition states for dehydrogenation reactions increase by only 5-10 kJ/mol. Results from DFT calculations show that transition-state energies for CH3CO-OH bond cleavage increase by only 12 kJ/mol on Pt3Sn(111) compared to Pt(111). The suppression of C-C bond cleavage in ethanol and acetic acid upon addition of Sn to Pt is also confirmed by microcalorimetric and infrared spectroscopic measurements at 300 K of the interactions of ethanol and acetic acid with Pt and PtSn on a silica support that had been silylated to remove silanol groups.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Rapid screening of selective serotonin re-uptake inhibitors in urine samples using solid-phase microextraction gas chromatography–mass spectrometry

In this paper a solid-phase microextraction–gas chromatography–mass spectrometry (SPME–GC–MS) method is proposed for a rapid analysis of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI)—venlafaxine, fluvoxamine, mirtazapine, fluoxetine, citalopram, and sertraline—in urine samples. The SPME-based method enables simultaneous determination of the target SSRI after simple in-situ derivatization of some of the target compounds. Calibration curves in water and in urine were validated and statistically compared. This revealed the absence of matrix effect and, in consequence, the possibility of quantifying SSRI in urine samples by external water calibration. Intra-day and inter-day precision was satisfactory for all the target compounds (relative standard deviation, RSD, <14%) and the detection limits achieved were <0.4 ng mL^–1 urine. The time required for the SPME step and for GC analysis (30 min each) enables high throughput. The method was applied to real urine samples from different patients being treated with some of these pharmaceuticals. Some SSRI metabolites were also detected and tentatively identified.     

Penetration and interactions of the antimicrobial peptide, microcin J25, into uncharged phospholipid monolayers

Microcin J25 forms stable monolayers at the air-water interface showing a collapse at a surface pressure of 5 mN/m, 220 mV of surface potential, and 6 fV per squared centimeter of surface potential per unit of molecular surface density. The adsorption of microcin J25 from the subphase at clean interfaces leads to a rise of 10 mN/m in surface pressure and a surface potential of 220 mV. From these data microcin appears to be a poor surfactant per se. Nevertheless, the interaction with the lipid monolayer further increase the stability of the peptide at the interface depending on the mode in which the monolayer is formed. Spreading with egg PC leads to nonideal mixing up to 7 mN/m, with hyperpolarization and expansion of components at the interface, with a small excess free energy of mixing caused by favorable contributions to entropy due to molecular area expansion compensating for the unfavorable enthalpy changes arising from repulsive dipolar interactions. Above 7 mN/m microcin is squeezed out, leaving a film of pure phospholipid. Nevertheless, the presence of lipid at 10 and 20 mN/m stabilize further microcin at the interface and adsorption from the subphase proceeds up to 30 mN/m, equivalent to surface pressure in bilayers.     

Biophysical characterization of complexation of DNA with block copolymers of poly(2-dimethylaminoethyl) methacrylate, poly(ethylene oxide), and poly(propylene oxide)

The interactions of DNA (salmon testes) with two new cationic block copolymers made of poly(2-dimethylaminoethyl) methacrylate and poly(ethylene oxide), PEO-pDMAEMA, or poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), L92-pDMAEMA, were studied with the aim to understand their different in vitro transfection efficiencies when used as nonviral delivery vectors. PEO-pDMAEMA does not show surface activity while L92-pDMAEMA is as surface active as its parent Pluronic L92. Surface tension, titration microcalorimetry, ethidium bromide displacement, and zeta-potential measurements were carried out in phosphate buffers at pH 5 and 7. The association of L92-pDMAEMA with DNA was strongly exothermic at both pHs; the critical aggregation concentration (CAC) corresponded to a N/P ratio of 0.3, the maximum energy evolved was reached for N/P ratios of 0.82 and 1.27 at pH 5 and pH 7, respectively, and the saturation occurred for N/P ratios close to 2. The presence of L92 in the structure of this new block copolymer apparently did not modify the thermodynamic parameters of the interaction with DNA. In contrast, the interaction with PEO-pDMAEMA was significantly less exothermic, and CAC and saturation occurred for N/Ps equal to 0.43 and 1.37, respectively. The strong affinity of L92-pDMAEMA for DNA was reflected in its capacity to displace ethidium bromide and in the jump in the values of the zeta potential when N/P is near 1. Above the N/P ratio at which electroneutral polyplexes are formed, only at pH 5 an excess of L92-pDMAEMA is incorporated in the complexes, resulting in positively charged complexes. The profile of the zeta-potential values obtained for mixtures of L92-pDMAEMA with Pluronic P123 showed a shift to a lower N/P ratio, owing to an easier interaction of L92-pDMAEMA molecules with DNA in the presence of P123. Additionally, a visual inspection of the systems indicates that P123 contributes to stabilize/solubilize the DNA/cationic polymer aggregates, by avoiding the typical phase separation near the charge neutralization point. The information obtained can be particularly useful to optimize the conditions to form efficient polyplexes for gene delivery systems.     

Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

New benzyne approach to the synthesis of dehydroaporphines, 4,5-dioxoaporphines and aristolactams

A new strategy for the synthesis of some aporphinoid alkaloids is described. It is based on the intermolecular Diels-Alder cyclization between benzyne and an appropriate methylene isoquinoline derivative.     

Carboxylate-bridged copper(II)-lanthanide(III) complexes [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n)(Ln = Dy,Ho, Er,Y; oda = oxydiacetate)

The hydrothermal reaction of Ln(2)O(3) (Ln = Dy and Ho), Cu(OAc)(2).2H(2)O, and oxydiacetic acid in the approximate mole ratio of 1:3:8 resulted in the formation of two new members of the isostructural series of polymers formulated as [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n), crystallizing in the hexagonal crystal system, space group P6/mcc (No. 192). Temperature-dependent magnetic susceptibilities and EPR spectra are reported for the heterometallic compounds Cu-Dy 1, Cu-Ho 2, Cu-Er 3, and Cu-Y 4. The results are discussed in terms of the structure of the compounds, the electronic properties of the lanthanide ions, and the exchange interactions between the magnetic ions.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.