多目标半定规划的加权中心路径法

对于线性型多目标半定规划问题，引进加权中心路径的概念，并利用单目标半定规划的中心路径法，提出了求解多目标半定规划问题的加权中心路径法，先得型对一个叔向量的有效解，然后在此基础上，提出了通过一次迭代得到对应一定范围内其他任意权向量的有效解的一步修正方法．     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

LD抽运Cr~(4 )∶YAG高重复率被动调QNd∶YVO_4激光器

采用Cr4 ∶YAG晶体作为可饱和吸收体,实现连续激光二极管(LD)端面抽运的Nd∶YVO4激光器的高重复率被动调Q·在注入抽运功率为8.8W时,得到重复频率23.8kHz、平均功率1.21W的调Q脉冲序列;每个脉冲能量为51μJ、脉宽为25ns、峰值功率达到2.03kW·实验上研究了脉冲重复频率、平均输出功率、脉冲宽度、单脉冲能量与抽运功率、输出镜透过率的关系·实验结果表明,当抽运功率较大时,脉冲重复频率和输出平均功率随着抽运功率的增加而减小,对此进行了合理的理论解释·     

沿直线的垂直方向匀速直线运动的带电直线的电场

本文利用相对论变换关系计算了沿直线的垂直方向匀速运动的带电直线的电场.     

溶胀后的弹性印章进行毛细微模塑

用溶胀后的聚二甲基硅氧烷弹性印章进行毛细微模塑,得到了聚苯乙烯丙酮溶液的微四方点阵图案．较少的PS溶液滴加量会造成孤立不相连的微点阵图形．同时还获得了由于在收缩过程中各部分溶剂挥发速度不一造成的特殊的微点阵图案．     

Raman spectroscopic study of ceramic Sr2Bi4Ti5O18

Raman spectra of ceramic Sr2Bi4Ti5O18 （SBTi5） are reported to consist of four different Raman bands. Temperature-dependent spectra reveal the relationship between the lattice vibration and the material＇s structure. There appears a relatively large change in structure of the material at about 273K, The anharmonic potential of the material has a great influence on its phonon mode full width at half maximum （FWHM）, which can be expressed by a function of temperature. Theoretical fittings of the FWHMs for the two modes at around 312 cm^-1 and 464cm^-1 indicate that the latter phonon mode is more anharmonic than the former one.     

DIELECTRIC EFFECT ON THE RADIO-FREQUENCY CHARACTERISTICS OF A RECTANGULAR WAVEGUIDE GRATING TRAVELING WAVE TUBE

A new type of partial-dielectric-loaded rectangular waveguide grating slow-wave structure (SWS) for millimeter wave traveling wave tube (TWT) is presented in this paper. The radio-frequency characteristics including the dispersion properties, the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analyzed. The results show that the dispersion of the rectangular waveguide grating circuit is weakened, the phase velocity is reduced and the position of the maximum E _z is basically invariant after partially filling the dielectric materials in the rectangular waveguide grating SWS. Although the coupling impedance decreases a little, it still keeps above 40 Ω.