Development of an analytical procedure for determination of selected estrogens and progestagens in water samples

An analytical procedure has been developed for determination of eight selected natural and synthetic hormonal steroids in surface water and in effluent samples. Several methodological points have been investigated and are discussed; they include the choice of the solid-phase extraction sorbent, the influence of flow rate on recovery, the breakthrough volume for a given sorbent (Env+ and Oasis HLB), sample clean up, and sample storage. As regards the latter point, it was found that when no preservative was added to effluent from a sewage-treatment plant, severe loss of steroids occurred—85% of progesterone and about 30% of both estrone and estradiol were found to be degraded in 24 h. The procedure developed was applied to samples from the Seine river estuary. Sex steroids were not detected in surface water; estrone was the most commonly detected steroid in sewage-treatment plant effluent, with levels ranging from 1.8 to 8.3 ng L^–1. Synthetic estrogens (ethynylestradiol and mestranol) and progestagens (levonorgestrel and norethindrone) were never detected, whatever the sampling season. Overall, for 162 out of 168 measurements levels were below the detection limits of the developed procedure.     

New butenolides in plantlets of Virola surinamensis (Myristicaceae)

A phytochemical investigation in plantlets of the Brazilian medicinal tree Virola surinamensis resulted in the isolation and structural determination of four new compounds: 3-hydroxy-4-methyl-2-(11'-piperonyl-n-undecyl)-butenolide; 3-hydroxy-4-methyl-2-(7'-piperonyl-n-heptyl)-butanolide; 9'-(3,4-methylenedioxy-phenyl)-nonanoic acid and 13'-(3,4-methylene-dioxyphenyl)-tridecanoic acid. Thirteen compounds previously isolated from seeds and adult plants were also reported.     

PM3 semi-empirical study of stereoelectronic effects in the Baeyer-Villiger reaction

The Baeyer-Villiger reaction of polymethoxybenzaldehydes with peroxysuccinic acid (PSA) is studied theoretically. The semi-empirical SCF-MO/PM3 method has been used to study the reaction and to calculate the energy profiles. In addition, heat of formation computations and bond order analyses of the transition species along the reaction coordinates have been performed and are interpreted qualitatively in terms of electron flow through the system during aryl migration. Our results support the hypothesis that the second step is a concerted reaction. Our data support a definite effect of the substituent on the aryl migration. The theoretical predictions are in good agreement with experimental results.     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.     

Efficient combination of task-specific ionic liquid and microwave dielectric heating applied to one-pot three component synthesis of a small library of 4-thiazolidinones

The first report of the use of task-specific ionic liquid as synthetic equivalent of ionic liquid-phase matrice for the preparation of a small library of 4-thiazolidinones is reported in this paper. The starting (ethyleneglycol)ionic liquid-phase is functionalized in good yields with 4-(formylphenoxy)butyric acid by using usual esterification reaction conditions (DCC/DMAP as catalyst). The synthesis of the ionic liquid-phase bound 4-thiazolidinones was performed by a one-pot three-component condensation under microwave dielectric heating. The final cleavage under microwave/catalysis strategy provides the expected 4-thiazolidinones in high purity after flash-chromatography purification. According to the ionic liquid-phase organic synthesis (IoLiPOS) methodology, it was found that optimized reaction conditions were performed by standard analytical methods (NMR, TLC). The ¹H, ¹³C NMR spectrum of some representative 4-thiazolidinones and ionic liquid-phase bound benzaldehyde are also reported.     

Autoxidation of cyclohexane: conventional views challenged by theory and experiment.

In spite of its industrial importance, the detailed reaction mechanism of cyclohexane autoxidation by O2 is still insufficiently known. Based on quantum chemical potential energy surfaces, rate coefficients of the primary and secondary chain propagation steps involving the cyclohexylperoxyl (CyOO) radical were evaluated using multiconformer transition-state theory. Including tunneling and hindered-internal-rotation effects, the rate coefficient for hydrogen-atom abstraction from cyclohexane (CyH) by CyOO was calculated to be k(T)= 1.46 x 10(-11) x exp(-17.8 kcal mol(-1)/ RT) cm3s(-1) (300-600K), close to the experimental data. A "Franck-Rabinowitch cage" reaction between the nascent cyclohexylhydroperoxide (CyOOH) and cyclohexyl radical, products from CyOO + CyH, is put forward as an initially important cyclohexanol (CyOH) formation channel. alphaH abstraction by CyOO. from cyclohexanone was calculated to be only about five times faster than that from CyH, too slow to explain all the observed side products. The a-hydrogen (alphaH) abstractions from CyOH and CyOOH by CyOO. are predicted to be about 10 and 40 times faster, respectively, than the CyOO. +CyH reaction. The very fast CyOO.+CyOOH reaction proceeds through the unstable Cy-alphaH .OOH radical that decomposes spontaneously into the ketone (Q=O) plus the OH radical; the "hot" .OH is found to produce the bulk of the alcohol via a second, "activated cage" reaction analogous to that above. It is thus shown how the very reactive CyOOH intermediate is the predominant source of ketone and alcohol, while it also leads to some side products. The alpha-hydroxycyclohexylperoxyl radical formed during the moderately fast oxidation of CyOH is shown to decompose fast into HO2 + cyclohexanone in a rapidly equilibrated reaction, which constitutes a smaller, second ketone source. These two fast cyclohexanone forming routes avoid the need for unfavorable molecular routes hitherto invoked as ketone sources. The theoretical predictions are supported and complemented by experimental findings. The newly proposed scheme is also largely applicable to the oxidation of other hydrocarbons, such as toluene, xylene, and ethylbenzene.     

Effects of structural factors on the pi-dimerization and/or disproportionation of the cation radical of extended TTF containing thiophene-based pi-conjugated spacers

The electrochemical and chemical oxidation of extended TTF 4 and 5 are analysed by cyclic voltammetry, Visible/NIR and ESR spectroscopies, and the X-ray structures of the new salts 5 x BF(4)(CH(2)Cl(2)) and 4 x ClO(4)(THF)(1/2) are presented. The effects of structural factors on the pi-dimerization or the disproportionation reaction of the cation radical are shown. The oxidation of compound 4 presents the successive formation of stable cation radical and dication species both in dichloromethane (DCM) and in a CH(3)CN/THF mixture. In contrast, for compound 5, the stability of the oxidation states strongly depends on the nature of the solvent. In DCM, the oxidation of 5 proceeds by two close one-electron transfers while in CH(3)CN/THF the dication is directly formed via a two-electron process. The X-ray structures of the two salts reveal the formation of pi-dimers of cation radical. While the dimer (5(2))(2+) is due mainly to pi-pi interactions between the conjugating spacer, the multiplication of the sulfur atoms in compound 4 contributes to stabilize the dimer by the combined effects of S-S and pi-pi interactions. Visible/NIR and ESR experiments confirm the higher tendency of 4(+)(.) to dimerize with the occurrence of dimer and monomer in solution, while for 5(+)(.) only the monomer is detected in DCM. On the other hand, by dissolution of 5 x BF(4)(CH(2)Cl(2)) in CH(3)CN, only the neutral and the dicationic states of compounds 5 are observed owing to the disproportionation reaction.     

The synthesis of DL-1-(hexadecanoyloxy)methyl- and 1-O-hexadecanoyl-inositols as potential inhibitors of phospholipase C

The synthesis of racemic analogues of phosphatidylinositol (PI) and phosphatidylinositol 4,5-bisphosphate (PIP₂) starting from myo-inositol is described. Inositol derivatives with and without homologalion at C(l) and with and without ionic groups (phosphate or sulfate) at C(4) and C(5) were prepared as well as homologated derivatives with deoxy composition at C(2) and/or C(6). In all these compounds, palmitate ester groups were introduced in place of the diacylglyceryl group of PI or PIP₂.     

Contribution à l'étude du comportement de la catéchine en milieu alcalin

Contribution to the study of the behaviour of catechin in alkaline medium When catechin ( 1 ) is warmed with aqueous alkali it first undergoes rapid epimerisation. After some time a novel bridged carbocyclic enol, catechinic acid ( 3 ) separates out and may be isolated in excellent yield. Eventually catechinic acid isomerises to 2-(3′,4′-dihydroxyphenyl)-3,9-epoxy-6-oxo-bicyclo[3,3,1]-non-7-en-8,9-diol ( 4 ) via an open chain anion ( 5 ) which is also involved in the epimerisation of catechin. Assignments of structure are given and the equilibria observed are discussed.     

A practical access to novel 2-amino-5-arylidene-1,3-thiazol-4(5H)-ones via sulfur/nitrogen displacement under solvent-free microwave irradiation

A new effective approach to the synthesis of a small library of 2-amino-5-arylidene-1,3-thiazol-4(5H)-ones was reported using solvent-free reaction conditions under microwave irradiation. In the first step, rhodanines were subjected to Knoevenagel condensation with aryl aldimines according to a facile one-pot protocol. Then the (5Z)-5-arylidene rhodanine derivatives were transformed directly into the corresponding 2-amino-1,3-thiazol-4(5H)-ones by sulfur/nitrogen displacement reaction under microwaves with retention of configuration and good overall yields.