A model for the calculation of noise transmission inside dwellings: application to aircraft noise

A numerical model of sound transmission inside dwellings has been developed. It is based on a decoupled method mixing integral, modal and geometric approaches. Kropp's formulation has been adapted to take balconies into account. Architectural effects such as projected roofs or nearby buildings have been analysed. Sound transmission is strongly affected by the angle of incidence of incoming waves. The proposed approach makes use of velocity fields on windows either computed or measured with a laser vibrometer. Comparisons between computations and measurements are reported.     

Controlled synthesis of amphiphilic biodegradable polylactide‐grafted dextran copolymers

The whole controlled synthesis of novel amphiphilic polylactide (PLA)‐grafted dextran copolymers was achieved. The control of the architecture of such biodegradable and potentially biocompatible copolymers has required a three‐step synthesis based on the “grafting from” concept. The first step consisted of the partial silylation of the dextran hydroxyl groups. This protection step was followed by the ring‐opening polymerization of D ,L ‐lactide initiated from the remaining OH functions of the partially silylated polysaccharide. The third step involved the silylether group deprotection under very mild conditions. Based on previous studies, in which the control of the first step was achieved, this study is focused on the last two steps. Experimental conditions were investigated to ensure a controlled polymerization of D ,L ‐lactide, in terms of grafting efficiency, graft length, and transesterification limitation. After polymerization, the final step was studied in order to avoid degradation of both polysaccharide backbone and polyester grafts. The chemical stability of dextran backbone was checked throughout each step of the synthesis. PLA‐grafted dextrans and PLA‐grafted (silylated dextrans) were proved to adopt a core‐shell conformation in various solvents. Furthermore, preliminary experiments on the potential use of these amphiphilic grafted copolymers as liquid/liquid interface stabilizers were performed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2577–2588, 2004     

Wavelets and adaptive grids for the discontinuous Galerkin method

In this paper, space adaptivity is introduced to control the error in the numerical solution of hyperbolic systems of conservation laws. The reference numerical scheme is a new version of the discontinuous Galerkin method, which uses an implicit diffusive term in the direction of the streamlines, for stability purposes. The decision whether to refine or to unrefine the grid in a certain location is taken according to the magnitude of wavelet coefficients, which are indicators of local smoothness of the numerical solution. Numerical solutions of the nonlinear Euler equations illustrate the efficiency of the method.     

Monotonicity of solutions and blow-up for semilinear parabolic equations with nonlinear memory

We show the existence of monotone in time solutions for a semilinear parabolic equation with memory. The blow-up rate estimate of the solution is known to be a consequence of the monotonicity property.     

Gradient bounds for solutions of semilinear parabolic equations without Bernstein's quadratic condition

We establish gradient estimates for bounded solutions of semilinear parabolic equations, where the nonlinearity only satisfies one-sided quadratic upper growth assumptions, instead of the classical (two-sided) Bernstein's condition. This extends a recent work of Al. and Ar. Tersenov (Indiana Univ. Math. J. 50 (2001) 1899–1913), where results of this kind were obtained for radial solutions in a ball, by a different technique. To cite this article: J.-Ph. Bartier, Ph. Souplet, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

Mathematical and numerical analysis of a simplified time-dependent viscoelastic flow

A time-dependent model corresponding to an Oldroyd-B viscoelastic fluid is considered, the convective terms being disregarded. Global existence in time is proved in Banach spaces provided the data are small enough, using the implicit function theorem and a maximum regularity property for a three fields Stokes problem. A finite element discretization in space is then proposed. Existence of the numerical solution is proved for small data, so as a priori error estimates, using again an implicit function theorem. Supported by the Swiss National Science Foundation. Fellowship PBEL2–114311.     

(Mn1−xPbx)Pb10+ySb12−yS26−yCl4+yO, a new oxy-chloro-sulfide with ∼2 nm-spaced (Mn,Pb)Cl4 single chains within a waffle-type crystal structure

The new oxy-chloro-sulfide (Mn_1−xPb_x)Pb_10+ySb_12−yS_26−yCl_4+yO (x ∈ [0.2-0.3]; y ∈ [0.3-1.6]) was synthesized by dry way at 500-600 °C. A single crystal ∼Mn_0.7Pb_11.0Sb_11.3S_25.3Cl_4.7O indicates a monoclinic symmetry, space group C2/m, with a = 37.480(8), b = 4.1178(8), c = 18.167(4) Å, β = 106.37(3)°, V = 2690.2(9) Å³, Z = 2. Its crystal structure was determined by X-ray single crystal diffraction, with a final R = 5.11%. Modular analysis of the crystal structure reveals a “waffle” architecture, where complex rods with lozenge section delimitate an internal channel filled by a single chain of (Mn_0.7Pb_0.3)Cl₆ octahedra connected by opposite edges. Minimal inter-chain distances are close to 18 Å. The rod wall, two-atom thick, presents, in alternation with S atoms, Pb or (Pb,Sb) cations with prismatic coordination in the internal atom layer, while the external atom layer is constituted exclusively by Sb cations with dissymmetric square pyramidal coordination. A (Pb,Sb)₂S₂ fragment connects two successive rods along (2 0 1) to form a waffle-type palissadic layer. The unique O position, half filled, presents the same environment than the isolated O positions in the oxy-sulfide Pb₁₄Sb₃₀S₅₄O₅, or oxy-chloro-sulfides Pb₁₈Sb₂₀S₄₆Cl₂O and (Cu,Ag)₂Pb₂₁Sb₂₃S₅₅ClO. This compound belongs to a pseudo-homologous series of chalcogenides with waffle structure, ordered according to the size of their lozenge shape channel. Such a complex senary compound of the oxy-chloro-sulfide type illustrates the structural competition between three cations, on one hand, and, on the other hand, three anions. This compound is of special interest regarding the 1D distribution of magnetic Mn²⁺ atoms at the ∼2 nm scale.     

On a model of electromagnetic field propagation in ferroelectric media

The Maxwell system in an anisotropic, inhomogeneous medium with non-linear memory effect produced by a Maxwell type system for the polarization is investigated under low regularity assumptions on data and domain. The particular form of memory in the system is motivated by a model for electromagnetic wave propagation in ferromagnetic materials suggested by Greenberg, MacCamy and Coffman [J.M. Greenberg, R.C. MacCamy, C.V. Coffman, On the long-time behavior of ferroelectric systems, Phys. D 134 (1999) 362-383]. To avoid unnecessary regularity requirements the problem is approached as a system of space-time operator equation in the framework of extrapolation spaces (Sobolev lattices), a theoretical framework developed in [R. Picard, Evolution equations as space-time operator equations, Math. Anal. Appl. 173 (2) (1993) 436-458; R. Picard, Evolution equations as operator equations in lattices of Hilbert spaces, Glasnik Mat. 35 (2000) 111-136]. A solution theory for a large class of ferromagnetic materials confined to an arbitrary open set (with suitably generalized boundary conditions) is obtained.     

Design of the cold atom PHARAO space clock and initial test results

In this paper we describe the cold atom clock PHARAO, designed for microgravity operation. All elements of the PHARAO engineering model have been manufactured and delivered to CNES, the French space agency. We present the clock design, its main characteristics, and initial science operation. PHARAO is one of the main components of the Atomic Clock Ensemble in Space payload that is scheduled to fly on board the International Space Station in 2010. PACS 07.87.+v; 06.30.Ft; 95.55.Sh; 32.80.Pj