The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition

To investigate the influencing rules of the variations of powder and laser defocusing distance on surface quality and obtain the smooth surface of parts in laser direct metal deposition, the thin-walled metal parts were fabricated under three different powder defocusing distances and three different laser defocusing distances conditions. The experimental results show that a high surface quality can be obtained with the powder focussed below the substrate and laser focussed above the substrate process, and the variation in which the powder focus moves from above to below the melt pool plays a leading role and the variation in which the laser focus moves from above to below the melt pool plays a supplementary role in the influence on the surface quality. To explain the experimental results, a simple model of the track height is established.     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Experimental investigation of secondary reactions of intermediates in delayed coking

We report an experimental investigation of secondary reactions of intermediates in delayed coking. Thermal cracking reactions of intermediates, for example coker naphtha (C₅ ~180?°C), light coker gas oil (LCGO, 180?C350?°C), middle coker gas oil (MCGO, 350?C440?°C), and heavy coker gas oil (HCGO, >440?°C), were investigated. The results reveal that cracking of coker naphtha and LCGO is low under these experimental conditions. Thermal cracking MCGO exceeds that of LCGO. Among all the intermediates, thermal cracking is greatest for HCGO. The secondary reactions of HCGO produce not only gas and liquid products, but also coke. This increase in the yields of gas and coke is attributed to secondary reactions of HCGO and MCGO. Inhibition of the secondary reactions of intermediates results in a greater yield of liquid.     

AGET ATRP of water‐soluble PEGMA: Fast living radical polymerization mediated by iron catalyst

In this work, living radical polymerizations of a water‐soluble monomer poly(ethylene glycol) monomethyl ether methacylate (PEGMA) in bulk with low‐toxic iron catalyst system, including iron chloride hexahydrate and triphenylphosphine, were carried out successfully. Effect of reaction temperature and catalyst concentration on the polymerization of PEGMA was investigated. The polymerization kinetics showed the features of “living”/controlled radical polymerization. For example, M_n,GPC values of the resultant polymers increased linearly with monomer conversion. A faster polymerization of PEGMA could be obtained in the presence of a reducing agent Fe(0) wire or ascorbic acid. In the case of Fe(0) wire as the reducing agent, a monomer conversion of 80% was obtained in 80 min of reaction time at 90 °C, yielding a water‐soluble poly(PEGMA) with M_n = 65,500 g mol^?1 and M_w/M_n = 1.39. The features of “living”/controlled radical polymerization of PEGMA were verified by analysis of chain‐end and chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The effect of phosphate buffer solutions on uniconazole complexation with hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin

The inclusion complexes of uniconazole [(E)-1-(4-chlorophenyl)-4,4-dimethyl-2-(1,2,4-triazol-lyl)-1-penten-3-ol, UCZ] with two cyclodextrin derivatives, hydroxypropyl-β-cyclodextrin (HP-β-CD) and methylated-β-cyclodextrin (Me-β-CD), were prepared and characterized by ¹H NMR and FT-IR. The phase solubility of UCZ and HP-β-CD, UCZ and Me-β-CD, which displays the ability of CDs complexation and solubilization, was studied in aqueous solutions and phosphate buffer solutions (PBS) with different property pH values (6.2, 7.2, 8.0). The solubility results indicated that the pH of PBS showed more enhancement on the interaction of HP-β-CD and UCZ than Me-β-CD with the increasing pH value, and the optimal pH value for complexation of UCZ and HP-β-CD, UCZ and Me-β-CD was at 8.0 and at 7.2, respectively. These were also determined by UCZ release behavior and dissolution studies of the complexes in solid state.     

Fabrication of a sol–gel derived microporous zirconia membrane for nanofiltration

This paper reports the fabrication and nanofiltration properties of a sol–gel derived microporous zirconia membrane. Effects of synthesis parameters, including hydrolysis time, hydrolysis temperature, hydrolysis ratio and chelating agent dopant, on the state and size of polymeric zirconia sol, were investigated. Highly reproducible and stable zirconia sol after refluxing at 40 °C for 180 min, with an average particle size of approximately 8.6 nm, was synthesized with a recipe of [Zirconium n-propoxide]: [Diethanolamine]: [1-propanol]: [H₂O] being 1: 2.2: 28.7: 9.4 (in molar ratio). The sol was subsequently used for the fabrication of microporous ZrO₂ membranes onto alumina supported mesoporous γ-Al₂O₃ layers. ZrO₂ membranes with molecular weight cut-off (MWCO) of 354, 1,195, corresponding to the pore size of 0.94 and 1.75 nm, were successfully fabricated. Ionic retention properties of such ZrO₂ membranes with respect to electrolyte solutions, like MgCl₂, CaCl₂, NaCl and Na₂SO₄, were also determined. Effects of parameters such as concentration of salt solutions and trans-membrane pressure on retention rates of microporous ZrO₂ membranes were studied in detail. Results showed that zirconium n-propoxide derived microporous ZrO₂ membranes exhibited comparatively high retention rates towards divalent ions like Mg²⁺ and Ca²⁺, while much lower retention rates were observed for mono-valent ion (Na⁺) in the present study, which are the characteristics of nanofiltration membranes.