Matrix separation of palladium and iridium by the cellulose anion exchanger Cellex T and the subsequent determination of palladium at theμg/g-level

The preconcentration and separation of palladium and iridium from base metals is studied with cellulose (Cellex T) and styrene-divinylbenzene (Varion AT 400) anion exchangers. In spite of lower capacity of Cellex T to chloride complexes of Pd and Ir, it allowed to get a higher preconcentration factor. Yields of 92–99% are achieved for Pd and 96–97% for Ir from the solutions containing great excess of base and heavy metals. Graphite furnace atomic absorption spectrometry is used for the final measurements. The procedure has been applied to the determination of palladium in natural samples.     

Studies of the soluble part of oxidised coals

Soluble products obtained from the oxidation of four types of coal, each characterised by different degree of coalification and different degree of sulphur content, are studied. The coals are oxidised with peracetic acid (PAA) and nitric acid. Analyses are performed by Atmospheric Pressure-Temperature Programmed Reduction (AP-TPR) and Fourier Transform Infrared Spectroscopy (FTIR). The soluble products contain much more sulphur than the insoluble products of oxidation. The products obtained from the reaction with HNO₃ contain higher amounts of inorganic sulphur compounds, while those obtained from the reaction with PAA are characterised by an increased content of organic sulphur species.     

Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fluorescence lifetimes and spectral properties of protochlorophyllide in organic solvents in relation to the respective parameters in vivo

In this work, absorption and fluorescence spectra of protochlorophyllide (Pchlide), as well as its fluorescence lifetime, were investigated in organic solvents having different physical properties. The obtained Pchlide spectral features are discussed in relation to the parameters describing solvent properties (refractive index and dielectric constant) and taking into account the specific solvent-Pchlide interaction. The correlation of Pchlide Qy and Soret absorption bands with solvent polarizability function ((n2 - 1)/(n2 + 2)) has been found; however, the dispersion of the observed points was rather high. A small Stokes shift of a magnitude between 50 and 300 cm(-1) was found, which indicates low sensitivity of Pchlide to nonspecific solvation. The fluorescence decay of Pchlide was single exponential in all the investigated solvents, with the lifetime value ranging from 5.2 ns for dioxane to 3.5 ns for methanol. Dependence of the obtained fluorescence lifetimes on the solvent orientation polarizability, a parameter being the function of both refractive index and dielectric constant, was discussed. In water-methanol mixtures, a further decrease of the fluorescence lifetime was observed, giving values of 2.9 ns for 25% methanol. Double-exponential decay of Pchlide fluorescence was found for Pchlide in a solution of 15% methanol with the lifetimes of 4.5 +/- 0.5 ns and 1.2 +/- 0.3 ns and in pure water with the lifetimes of 2.5 +/- 0.5 ns and 0.4 +/- 0.1 ns. The obtained results are discussed in relation to spectroscopic properties of Pchlide in vivo.     

Finitely convergent deterministic and stochastic iterative methods for solving convex feasibility problems

We propose finitely convergent methods for solving convex feasibility problems defined over a possibly infinite pool of constraints. Following other works in this area, we assume that the interior of the solution set is nonempty and that certain overrelaxation parameters form a divergent series. We combine our methods with a very general class of deterministic control sequences where, roughly speaking, we require that sooner or later we encounter a violated constraint if one exists. This requirement is satisfied, in particular, by the cyclic, repetitive and remotest set controls. Moreover, it is almost surely satisfied for random controls.

     

Solution of the problem of combinatorial characterization of the dimension of the kernel of a starshaped set

It is proved for a nonempty proper subset S of a real topological linear space L that kerS ={convA_z: z bdryS} and for a close connected nonconvex subset S of L that kerS ={convA_z: z slncS}, where bdryS and slncS denote the sets of boundary points and strong local nonconvexity points of S, respectively, and A_z = {s S: z is clearly visible from s via S}.This extends previous results and, combined with standard techniques, yields among others two Krasnosel'skii-type characterizations for the dimension of kerS in R^d in case of a nonempty proper set S with bdryS bounded and a closed connected nonconvex set S with lncS bounded.The assumption of boundedness of S turns out to be irrelevant in these criteria.Herrn Professor Dr. Wilhelm Stoll gewidmetResearch partially supported by the grant PB 2 1140 91 01     

Influence of substituents on positron annihilation in styrene copolymers

Results of angular correlation of annihilation radiation (ACAR) and positron annihilation lifetime (PAL) measurements are presented for five styrene copolymers: poly(co-styrene-phenylmaleimide) and its three derivatives with chlorine as well as for one with the OH group substituted at the benzene ring. It occurs that the chlorine substituted at three different positions at the benzene ring poly(co-styrene-o (or-m,-p)-chlorophenylmaleimide) inhibits the formation of the positronium to different extent. The greatest effect is observed in case of the chlorine atom substituted at the benzene ring at the ortho-position towards the nitrogen atom. The two long lifetimes (₃ and ₄) observed in the lifetime spectra are connected with the bimodal distributions of the free volume radius in the samples.     

Two-point Padé approximants for formal Stieltjes series

We prove that certain two-point Padé approximants occupying the diagonal of the Padé table form monotone sequences of lower and upper bounds uniformly converging to a Stieltjes function. The results can be applied to the theory of inhomogeneous media for the calculation of the bounds on the effective transport coefficients of heterogeneous materials.