离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

Amperometric detection of nitrite based on Dawson-type vanodotungstophosphate and carbon nanotubes

A nitrite sensor based on Dawson vanodotungstophosphates α₂-K₇P₂VW₁₇O₆₂·18H₂O (P₂W₁₇V) and carbon nanotubes (CNTs) was prepared by electrostatic layer-by-layer self-assembly technique. The sensor {PEI/PSS/[PDDA/P₂W₁₇V-CNTs]_n} was characterized by UV–vis spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectra (XPS). The electron transfer and sensing ability of this sensor were explored using cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) technology. The results show that the incorporation of CNTs and P₂W₁₇V into the composite film endowed the modified electrode with fast transfer rate and high electrocatalytic activity towards oxidation of nitrite. This nitrite sensor with 10 bilayers has a broad linear range of 5 × 10⁻⁸ to 2.13 × 10⁻³ M, a low detection limit of 0.0367 μM (S N⁻¹ = 3), a high sensitivity of 0.35 mA mM⁻¹ NO₂⁻, an excellent anti-interference property in the presence of other potential interfering species and a good stable. It was successfully employed for determination of nitrite in real towards.     

Nonlinear current-voltage characteristics of conductive polyethylene composites with carbon black filled pet microfibrils

Current-voltage electrical behavior of in situ microfibrillar carbon black (CB)/poly(ethylene terephthalate) (PET)/polyethylene (PE) (m-CB/PET/PE) composites with various CB concentrations at ambient temperatures was studied under a direct-current electric field. The current-voltage (I-V) curves exhibited nonlinearity beyond a critical value of voltage. The dynamic random resistor network (DRRN) model was adopted to semi-qualitatively explain the nonlinear conduction behavior of m-CB/PET/PE composites. Macroscopic nonlinearity originated from the interfacial interactions between CB/PET micro fibrils and additional conduction channels. Combined with the special conductive networks, an illustration was proposed to interpret the nonlinear I-V characteristics by a field emission or tunneling mechanism between CB particles in the CB/PET microfibers intersections.     

Influence of clay on the morphology and phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile)(PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN, most of the clays are first located at the boundaries between PMMA and SAN, and then gradually move to the PMMA-rich domain, owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region, indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence, the clay plays the role of an agent changing the conditions of phase structure formation.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

荧光增白剂28的光漂白特性研究

荧光增白剂28(F-28)为欧盟标准EN 648-2006《与食品接触的纸和纸板-荧光增白剂牢度的测定》中判断食品接触材料所含荧光增白剂是否向食品中迁移的标样。我们发现,在规定的波长365nm紫外光激发下,F-28所制成的标样会出现光漂白现象。因此,本文对F-28的光漂白特性进行研究。结果表明,紫外辐照时间为60s时,四级(3mg/L)、三级(8mg/L)、二级(31mg/L)、一级(125mg/L)滤纸和玻纤的最大荧光值衰减率分别为0.16%、0.29%、0.92%、0.44%和2.59%、1.99%、0.49%、3.14%;当辐照时间延长到1800 s时,最大荧光值衰减率分别增加为4.67%、4.22%、5.51%、2.75%和35.37%、39.78%、28.09%、39.38%。因此,在对食品接触材料是否含有荧光增白剂以及是否迁移的测试中,必须考虑光漂白因素。同时,滤纸作为迁移实验载体,在降低光漂白和稳定性方面比玻纤更具优势。     

Synthesis and characterization of a series of chiral NHC–Pd complexes derived from l-phenylalanine

The synthesis of a series of chiral Pd(L)PyBr₂ (3a–3e) and Pd(L)PyCl₂ (4d and 4e) complexes from l-phenylalanine is presented (L = (S)-3-allyl-4-benzyl-1-(2,6-diisopropylphenyl)-imidazolin-2-ylidene (a), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-2-ylmethyl)imidazolin-2-ylidene (b), (S)-4-benzyl-3-(biphenyl-4-ylmethyl)-1-(2,6-diisopropylphenyl)imidazolin-2-ylidene (c), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-1-ylmethyl)imidazolin-2-ylidene (d) or (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(2,4,6-trimethylbenzyl)imidazolin-2-ylidene (e). The complexes were characterized by physicochemical and spectroscopic methods, and the X-ray crystal structures of 3a–3c and 4d are reported. In each case, there is a slightly distorted square-planar geometry around palladium, which is surrounded by imidazolylidene, two trans halide ligands and a pyridine ligand. There are π–π stacking interactions in the crystal structures of these complexes. Complex 3a showed good catalytic activity in the Cu-free Sonogashira coupling reaction under aerobic conditions.     

Evaluation of measurement uncertainty in EA–IRMS: for determination of δ 13C value and C-4 plant sugar content in adulterated honey

In this study, the method for determining the stable carbon isotope ratio value was validated. Measurement uncertainty of stable carbon isotope ratio value of whole honey and its extracted protein derived from repeatability, reference gas, reference standards and calibration curve was calculated by applying the “bottom-up” approach according to Eurachem/CITAC guide. The expanded uncertainties for all results ranged from 0.14 to 0.19 ‰, with most of them between 0.15 and 0.16 ‰ (the coverage factor k = 2, the level of confidence p is approximately 95 %). The percentage contribution of each source to the relative combined uncertainty was calculated. The data indicated that calibration curves have more contribution to the relative combined uncertainty than repeatability and reference standards. On the other hand, the measurement uncertainty of C-4 sugar content in honey was estimated. Based on these results, 58 honey samples, such as acacia, chaste, Northeast China black bee, flowers and jujube honey, have been gathered to determine the C-4 plant sugar content adulteration in honey by elemental analyzer with an isotope ratio mass spectrometer. It can be found that all honey samples were not adulterated by C-4 plant sugar.     

聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.