Verteilung von Uran(VI) und Thorium zwischen Alkalinitratl?sungen und 5 Vol-% Tri-n-butylphosphat/Kerosen

Zusammenfassung Es wird ein allgemein anwendbares Verfahren zur quantitativen Bestimmung dünnschichtchromatographisch trennbarer Substanzen empfohlen, bei dem die Ablösung der getrennten Substanzen von dem Dünnschichtmaterial durch Elution in einem Mikrochromatographierrohr erfolgt. Die Herstellung einer geeigneten Mikropipette und die Anfertigung der Mikrochromatographierrohre wird beschrieben. Aus den erhaltenen Me\werten ergibt sich, da\ das Verfahren nur mit einem kleinen Fehler behaftet ist und sich die Ergebnisse sehr gut reproduzieren lassen.

---

Summary A generally applicable method is presented for the quantitative determination of compounds separable by thin-layer chromatography, where the separated substance is removed from the thin-layer material by elution in a microchromatography column. The preparation of a suitable micro-pipette and of the column for micro-chromatography is described. The data obtained show that the procedure works only with a slight error and the results are well reproducible.

---

---

1. Mitteilung über BeitrÄge zur quantitativen Dünnschichtchromatographie.

---

Central-UniversitÄt von Ecuador in Quito, seiner Zeit Humboldt-Stipendiat am Institut für Organische Chemie der UniversitÄt des Saarlandes.

---

Den Herren Prof. B. Eistert und O. Neunhoeffer danken wir für ihr Interesse an dieser Arbeit und für wertvolle Diskussionen.     

Characterization of Alkane Diol-CD Complexes. Acid Denitrosation of N-Methyl-N-Nitroso-p-Toluenesulphonamide as a Chemical Probe

A study was carried out on the acid denitrosation of N-methyl-N-nitroso-p-toluenesulfonamide (MNTS) in mixed systems made up of linear (geminal and terminal) alkyl diols and β-cyclodextrin (CD). The alkyl diols used allowed us to vary the length of the hydrocarbon chain from 2 to 6 carbon atoms. The observed rate constant, k _obs, decreases in the presence of CD. The inhibition profile decreases as the as the number of carbons in the chain is increased. This behaviour can be interpreted as a consequence of a balance between the complexation processes of MNTS and the alkyl diols by the CD. At a constant CD concentration and increase in the diols concentration decreases the concentration of free cyclodextrin available to complex with MNTS molecules and therefore produces an increases in the observed rate constant. The results were interpreted in terms of two different models; trough the presupposition and non-presupposition of a stoichiometry for the CD-diols complex. Both models agreed quite well and allow us to determine the uncomplexed cyclodextrin concentration in each case as well as the stoichiometry of the complexes. The binding constant for both types of alkane diols increase with increasing the number of carbon in the chain. Besides, the binding constant of the α,ω-alkane diols is higher than for the analog α,β-alkane diols. One of the main consequences of this study is that the acid denitrosation of MNTS can be use to obtain the stochiometry of the CD-diol complexes and to monitor the free cyclodextrin concentration.Electronic Supplementary Material Supplementary material is available for this article at     

Influence of the structure of the hydrophobe on the ideality of mixing in micelles in binary mixtures of amphiphilic tricyclic drugs

The composition of the micelles in binary mixtures of the cationic amphiphilic antidepressant drugs nortriptyline, amitriptyline, and doxepin has been determined from an analysis of the variation of the critical micelle concentration from conductivity measurements, as a function of solution composition. Assessment of the nonideality of mixing in terms of the interaction parameter from the regular solution approximation showed small deviations from ideal mixing, with negative interaction parameters for nortriptyline/amitriptyline systems and positive interaction parameters for mixtures of nortriptyline and doxepin. These differences in nonideality have been attributed to differences in the packing of the drugs in the mixed micelles arising from differences in the structure of the hydrophobe.     

Direct calculation of solid-liquid equilibria from density-of-states Monte Carlo simulations

A density-of-states Monte Carlo method is proposed for simulations of solid-liquid phase equilibria. A modified Wang-Landau density-of-states sampling approach is used to perform a random walk in regions of potential energy and volume relevant to solid-liquid equilibrium. The method provides a direct estimate of the relative density of states [Omega(U,V)] and thus the relative free energy within these regions, which is subsequently used to determine portions of the melting curve over wide ranges of pressure and temperature. The validity and usefulness of the method are demonstrated by performing crystallization simulations for the Lennard-Jones fluid and for NaCl.     

Structure and binding energy of anion-pi and cation-pi complexes: a comparison of MP2, RI-MP2, DFT, and DF-DFT methods

Several complexes of benzene with cations, hexafluorobenzene with anions, 1,3,5-trifluorobenzene with cations and anions, and s-triazine with cations and anions have been evaluated and compared at the MP2 and resolution of the identity MP2 (RI-MP2) levels. The RI-MP2 method is considerably faster than the MP2 and the interaction energies and equilibrium distances are almost identical for both methods. A similar result is found when comparing DFT and density fitting DFT (DF-DFT) levels. Therefore RI-MP2 and DF-DFT methods are well suited for the study of ion-pi interactions.     

Fluorocarbon soluble copper(II) carboxylate complexes with nonfluoroponytailed nitrogen ligands as precatalysts for the oxidation of alkenols and alcohols under fluorous biphasic or thermomorphic modes: structural and mechanistic aspects

This fluorous biphasic catalysis (FBC) contribution was focused on the synthesis and characterization of new fluorous soluble R(f)-Cu(II) carboxylate complexes containing nonfluoroponytailed ligands and defines their role as precatalysts for the FBC oxidation of alkenols and alcohols in the presence of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/O(2). In this FBC approach, we have utilized the phase-switching technique of Vincent et al. (J. Am. Chem. Soc. 2002, 124, 12942) to solubilize the nonfluoroponytailed ligands, N-1,4,7-Me(3)TACN, 2, and N-1,4,7-pentamethyldiethylenetriamine (PMDETA), 3, by reaction with a fluorous solvent-soluble copper (II) dimeric complex, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)](2), 1. Moreover, the reaction of nonfluoroponytailed ligands 2 and 3 with 1 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)(2)], 4, and [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2) (3)], 5, respectively. The known Cu(II) complex, 1, was further characterized by electron paramagnetic resonance (EPR) spectroscopy confirming its dimeric structure, while 4 and 5 were characterized by elemental analysis, IR, diffuse reflectance UV-vis, and EPR spectroscopy. Furthermore, 1, 4, and 5 were evaluated as precatalysts for alkenol and alcohol oxidation. The oxidation reactions of alkenols and alcohols in the presence of TEMPO/O(2) proceeded under FBC conditions for 1, 4, and 5, but 1-octanol was unreactive under single-phase FBC conditions at 90 degrees C with TEMPO/O(2). The thermomorphic property of 5, soluble in chlorobenzene/toluene at 90 degrees C but insoluble at room temperature, was also evaluated in the selective oxidation of p-nitrobenzyl alcohol to p-nitrobenzaldehyde. Plausible mechanisms concerning these FBC/thermomorphic oxidation reactions will be discussed.     

Simulation of the effects of chain architecture on the sorption of ethylene in polyethylene

An osmotic ensemble hyperparallel tempering technique has been developed to study the solubility of ethylene in amorphous linear low-density polyethylene of different chain architectures. The NERD united-atom force field (Nath, Escobedo, and de Pablo revised united-atom force field) is used in all simulations. We have investigated the effect of polyethylene chain length and branching on ethylene solubility. In this study, we have considered short-chain branching of amorphous linear low-density ethylene-1-hexene copolymers under typical polymerization reactor conditions. It is observed that, in the polymer, ethylene prefers to reside in the vicinity of polymer chain ends. This clustering causes a decrease in ethylene solubility with polymer chain length. When short-chain branches are introduced to a linear polymer chain, however, the chain-end clustering effect is counteracted by a higher density, thereby leading to an ethylene solubility almost identical to that in the linear polymer.     

Role of local structure on motions on the potential energy landscape for a model supercooled polymer

We have conducted detailed Monte Carlo and molecular dynamics simulations of a model glass forming polymeric system near its apparent glass transition temperature. We have characterized the local structure of the glass using a Voronoi-Delaunay analysis of local particle arrangements. After a perturbative face elimination, we find that a significant fraction of Voronoi polyhedra consist of 12 pentagonal faces, a sign of icosahedral ordering. Further, we have identified metabasins of particle vibrations on the potential energy landscape on the basis of persistence of particle positions and neighbors over a simulated trajectory. We find that the residence times for vibrations are correlated with a particular Voronoi volume and number of neighbors of a particle; the largest metabasins correspond to particles whose average Voronoi volume is close to the value expected on the basis of the density, and whose approximate number of neighbors is close to 12. The local distortion around a particle, measured in terms of the tetrahedricity of the Delaunay simplices, reveals that the particles with a higher degree of local distortion are likely to transition faster to a neighboring metabasin. In addition to the transition between metabasins, we have also examined the influence of vibrations at inherent structures (IS) on the local structure, and find that the the low frequency modes at the IS exhibit the greatest curvature with respect to the local structure. We believe that these results establish an important connection between the local structure of glass formers and the activated dynamics, thereby providing insights into the origins of dynamic heterogeneities.     

A chemical, morphological, and electrochemical (XPS, SEM/EDX, CV, and EIS) analysis of electrochemically modified electrode surfaces of natural chalcopyrite (CuFeS2) and pyrite (FeS2) in alkaline solutions

Electrodic surfaces of natural chalcopyrite and natural pyrite minerals (El Teniente mine, Chile) have been studied by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy including microanalysis (SEM/EDX). For comparison, fractured and polished mineral surfaces were also studied by XPS. In both electrodes, the formation of Fe(III) species containing oxygen were detected and Cu(II) species containing oxygen were additionally detected for chalcopyrite at advanced oxidation states. The presence of Cu(II) species containing oxygen was not detected by XPS for the initial oxidation states of the chalcopyrite. For pyrite, the present results do not allow confirmation of the presence of polysulfurs such as have been previously proposed. In both minerals, the measurements of SEM and EDX show relevant alterations in the respective surfaces when different potential values were applied. The chalcopyrite surface shows the formation of protrusions with a high concentration of oxygen. The pyrite surface shows a layer of modified material with high oxygen content. The modifications detected by XPS, SEM, and EDX allowed the explanation of the complexity of the equivalent circuit used to simulate the experimental EIS data. At high oxidation states, both minerals showed a pseudoinductive loop in the equivalent circuit, which was due to the active electrodissolution of the minerals which takes place through a surface film previously formed.     

Biocatalysis,sustainability, and industrial applications: Show me the metrics

1. Download : Download high-res image (144KB)
2. Download : Download full-size image