Influence of gamma irradiation and storage on the microbial load,chemical and sensory quality of chicken kabab

Influence of gamma irradiation and storage on the microbial load, chemical and sensory quality of chicken kabab was investigated. Chicken kabab was treated with 0, 2, 4 or 6 kGy doses of gamma irradiation. Treated and untreated samples were kept in a refrigerator (1–4 °C). Microbiological, chemical and sensory characteristics of chicken kabab were evaluated at 0–5 months of storage. Gamma irradiation decreased the microbial load and increased the shelf-life of chicken kabab. Irradiation did not influence the major constituents of chicken kabab (moisture, protein and fats). No significant differences (p>0.05) were observed for total acidity between non-irradiated (control) and irradiated chicken kabab. Thiobarbitric acid (TBA) values (expressed as mg malonaldehyde (MDA)/kg chicken kabab) and volatile basic nitrogen (VBN) in chicken kabab were not affected by the irradiation. Sensory evaluation showed no significant differences between irradiated and non-irradiated samples.     

Forward mixing model in a rotating disc contactor for kerosene–acetic acid–water system

The application of an extraction column model which takes into account the influence of the forward mixing model is brought forward by generation of values of the mass transfer and axial dispersion coefficients required by the model. Values of these coefficients were generated from solute concentration profile measurements in a rotary disc contactor (RDC). The use of the Handlos–Baron drop mass transfer model was justified. The resulting continuous phase transfer coefficients were found to be dependent largely on disc speed. The accuracy of the forward mixing model for kerosene–acetic acid–water system was adequately presented and explained by the axial dispersion coefficient.     

Response of periodic structures due to moving loadsRéponse de structures périodiques à des charges mobiles

A method is proposed to calculate the response of periodic structures subjected to moving loads. It is based on the Floquet decomposition which allows the restriction of the analysis for the overall system to a generic cell. The main contribution of the approach presented hereafter is that the response is directly deduced from transfer functions in the space-wavenumber domain calculated in an unbounded generic cell. Moreover, the equivalence of this new solution with the response of invariant structures obtained using Fourier transforms is established. To cite this article: H. Chebli et al., C. R. Mecanique 334 (2006).     

A potentiometric rhodamine-B based membrane sensor for the selective determination of chromium ions in wastewater.

The construction and performance characteristics of a novel chromate ion-selective membrane sensor are described and used for determining chromium(III) and chromium(VI) ions. The sensor is based on the use of a rhodamine-B chromate ion-associate complex as an electroactive material in a poly(vinyl chloride) membrane plasticized with o-nitrophenyloctyl ether as a solvent mediator. In a phosphate buffer solution of pH 6 - 7, the sensor displays a stable, reproducible and linear potential response over the concentration range of 1 x 10(-1) - 5 x 10(-6) mol l(-1) with an anionic Nernstian slope of 30.8 +/- 0.5 mV decade(-1) and a detection limit of 1 x 10(-6) mol l(-1) Cr(VI). High selectivity for Cr(VI) is offered over many common anions (e.g., I-, Br-, Cl-, IO4-, CN-, acetate, oxalate, citrate, sulfate, phosphate, thiosulfate, selenite, nitrate) and cations (e.g., Ag+, Ca2+, Sr2+, Co2+, Ni2+, Cu2+, Mn2+, Fe2+, Zn2+, Cd2+, Al3+, Cr3+). The sensor is used for determining Cr(VI) and/or Cr(III) ions in separate or mixed solutions after the oxidation of Cr(III) into Cr(VI) with H2O2. As low as 0.2 microg ml(-1) of chromium is determined with a precision of +/-1.2%. The chromium contents of some wastewater samples were accurately assessed, and the results agreed fairly well with data obtained by atomic absorption spectrometry.     

Finite difference scheme for large-deflection analysis of non-prismatic cantilever beams subjected to different types of continuous and discontinuous loadings

An efficient scheme, called quasi-linearization finite differences, is developed for large-deflection analysis of prismatic and non-prismatic slender cantilever beams subjected to various types of continuous and discontinuous external variable distributed and concentrated loads in horizontal and vertical global directions. Simultaneous equations of highly nonlinear and linear terms are obtained when casting the derived exact highly nonlinear governing differential equation using central finite differences on the nodes along the beam. A quasi-linearization scheme is used to solve these equations based on successive corrections of the nonlinear terms in the simultaneous equations. The nonlinear terms in the simultaneous equations are assumed constant during each correction (iteration). Several representative numerical examples of prismatic and non-prismatic slender cantilever beams with different loading conditions are analyzed to illustrate the merits of the adopted numerical scheme as well as its validity, accuracy and efficiency. The results of the present scheme are checked using large-displacement finite element analysis by the MSC/NASTRAN program. A comparison between the present secheme, MSC/NASTRAN and available results from the literature reveals excellent agreement. The advantage of the new scheme is that the load can be applied in one step with few iterations (3–6 iterations).     

Testing Aluminum Alloy from Quasi-static to Dynamic Strain-rates with a Modified Split Hopkinson Bar Method

An aluminum alloy¹ was tested at quasi-static to dynamic strain-rates (from 10⁻¹ to 5 10³ s⁻¹), using a single measuring device, a modified Split Hopkinson Bar. A wave separation technique [Bussac et al., J Mech Phys Solids 50:321–350, 2002] based on the maximum likelihood method was applied to process the strain and velocity measurements recorded at various points on each bar. With this method, it is possible to compute the stress, strain, displacement and velocity at any point on the bar. Since the measurement time is unlimited, the maximum strain measured in a given specimen no longer decreases with the strain-rate, as occurs with the classical Split Hopkinson Bar method. ¹The authors wish to thank the automobile manufacturer who provided samples of the alloy used in this study. For reasons of commercial and industrial confidentiality, we were not informed about the composition of this alloy.     

A review on potential development of flame retardant kenaf fibers reinforced polymer composites

Kenaf fibers have been extensively explored from the past few decades in polymer composites industries owing to its extensive adaptations, excellent properties together with its comparable mechanical properties to traditional glass fibers polymer composites. The combustibility or lowered flame retardancy hampered the diverse applications of kenaf fibers reinforced polymer composites, as it affects the mechanical strength and stiffness of composites during fire. Current review article intended to be a comprehensive source of published literature involving the flame retardants (FRs), types and applications of FRs and the fabrication of kenaf fibers reinforced polymer composites. This article will also provide a perfect data on the recent development of the FR kenaf fibers polymer composites with different FRs and explored its structural and semi‐structural industrial application for performing further research in this topic. Copyright © 2016 John Wiley & Sons, Ltd.     

Coupling of CFD Simulations and Population Balance Modeling to Predict Brownian Coagulation in an Emulsion Polymerization Reactor

In this study a framework consisting of a computational fluid dynamics simulation coupled to a population balance model for the modeling of emulsion polymerizations is proposed. The combined approach is used to understand the impact of changing length and time scales, as well as mixing conditions on the particle size distribution (PSD) of a polymer latex under different conditions. It is shown that the effect of agitation rate can have a profound impact on the distribution of ionic species in the reactor, and thus on the evolution of the PSD.

     

An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars

When using a classical SHPB (split Hopkinson pressure bar) set-up, the useful measuring time is limited by the length of the bars, so that the maximum strain which can be measured in material testing applications is also limited. In this paper, a new method with no time limits is presented for measuring the force and displacement at any station on a bar from strain or velocity measurements performed at various places on the bar. The method takes the wave dispersion into account, as must inevitably be done when making long time measurements. It can be applied to one-dimensional and single-mode waves of all kinds propagating through a medium (flexural waves in beams, acoustic waves in wave guides, etc.). With bars of usual sizes, the measuring time can be up to 50 times longer than the time available with classical methods. An analysis of the sensitivity of the results to the accuracy of the experimental data and to the quality of the wave propagation modelling was also carried out. Experimental results are given which show the efficiency of the method.