Binding of Ionic Pyrene Derivatives to Polyelectrolytes. A Uv Absorption and Fluorescence Study

Abstract

The binding of pyrenesulfonic acid and pyrenebutyric acid to poly(vinyl benzyl trimethylammonium) chloride was investigated by UV and fluorescence spectroscopy. It was found that the binding constant was 7.5 × 10⁴ and 3.5 × 10⁴M^?1, respectively. The addition of the polyelectrolyte quenches the fluorescence of the pyrene group, and at the same time the typical excimer emission appears. This emission originates in pre-formed ground state aggregates of the pyrene derivatives incorporated into the polyion domain. Similar effects were observed when anionic polyelectrolytes, poly(styrene sulfonic), and poly(vinyl sulfonic) acids were added to cationic pyrene derivatives. The binding constants depend on the length of the aliphatic sidechain of the derivatives.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.     

The Structure of a Non-Symmetric Disordered Tetramer: A Crystallographic and Solid State Multinuclear NMR Study of the Properties of 3(5)-Ethyl-5(3)-Phenyl-1H-Pyrazole

The X-ray structure and the solid-state NMR measurements, mainly ¹⁵N CPMAS of the labelled compound, allow to determine the static and dynamic properties of 3(5)-ethyl-5(3)-phenyl-1H-pyrazole. The compound is a tetramer formed by three 5-ethyl-3-phenyl-1H-pyrazole and one 3-ethyl-5-phenyl-1H-pyrazole tautomers in dynamic equilibrium with the complementary situation.     

Denitrosation of N-Nitrososulfonamide as Chemical Probe for Determination of Binding Constants to Cyclodextrins

The influence of β-CD concentration on the acid hydrolysis of N-methyl-N-nitroso-p-toluenesulfonamide (MNTS) has been studied in the presence and absence of different alcohol concentrations. The rate of the denitrosation reaction in bulk water decrease as the β-CD concentration increases due to MNTS complexation in the CD cavity and the reaction taking place exclusively outside the cyclodextrin. Changes in this inhibition due to the presence of β-CD allow us to obtain the binding constants of different alcohols to the cyclodextrin. These binding constants are in very good agreement with those determined in the bibliography by other methods.     

Conduction calorimetric studies of ternary binders based on Portland cement, calcium aluminate cement and calcium sulphate

Different binders of Portland cement, calcium aluminate cement and calcium sulphate (PC/CAC/C $ {\bar{\text{S}}} $ ) have been investigated to determinate the influence the CAC and C $ {\bar{\text{S}}} $ amount in the reactions mechanism. Several mixtures were studied, ratios of 100, 85/15 and 75/25 of PC/CAC with 0, 3 and 5 % of C $ {\bar{\text{S}}} $ . Conduction calorimetric technique was used to follow the hydration during 100 h. The XRD and FTIR techniques were used as support in the analysis of the hydration products. The results have shown that the studied ternary systems form an extra amount of ettringite, and changes in the reactions mechanism with respect to a PC. The reactions mechanism depends on the CAC and C $ {\bar{\text{S}}} $ amount present in the different binders.     

Hydration of high alumina cement–silica fume composite with addition of Portland cement or sodium polyphosphate under hydrothermal treatment

Various hydrothermal curing regimes were used to investigate the hydration and physical characteristics of two kinds of inorganic binder composites: high alumina cement–silica fume–Portland cement and high alumina cement–silica fume–sodium polyphosphate. Simultaneous thermal analysis (DTA and TG) was used to identify temperature ranges of thermal decomposition of cured samples and to characterize the nature of hydrate products. Two kinds of products are formed. The first ones consist of C₃AH₆, AH₃, calcium carbonate (C–C) as a product of carbonation, and C₃AH_1.5 resulted from the partial decomposition of C₃AH₆ under higher hydrothermal pressure. The second ones are the products formed by acid–base reaction between monocalcium aluminate and sodium polyphosphate to form NaCaPO₄·xH₂O and Al₂O₃·xH₂O that could convert to chemically bonded ceramic binders like hydroxyapatite (Ca₅(PO₄)₃OH) and gibbsite (Al(OH)₃). These two hydroceramic products formed under these conditions act also as binder and could be useful as cement binders for the protection of petroleum, gas, or geothermal wells. Mercury intrusion porosimeter was used for the estimation of the pore structure parameters of the composites. It turned up that longer curing time coupled with higher hydrothermal pressure has improved the pore structure of the first composite, while that of the second has remained unchanged.     

Development of a calorimetric sensor for medical application

A calorimetric sensor has been developed for local and direct measurement of calorific dissipations in different parts of the human body. The constructed prototype has a detection surface of 36 cm². The calibration of the sensor is based on a semi-empirical model that permits to simulate the operation of the device, making easier an operational functioning method. The device is modeled as a system with two inputs and two outputs. The inputs are the calorific power (W) that is intended to be measured and the power (W _pid) that dissipates a resistance, keeping constant the thermostat temperature through the use of a PID controller. The outputs are the thermostat temperature (T _pid) and the calorimetric signal (y) that provides the thermopile that is in contact with the body.     

Onset of Chiral Adenine Surface Growth

The structure and stability of adenine crystals and thin layers has been studied by using scanning tunneling microscopy, X‐ray diffraction, and density functional theory calculations. We have found that adenine crystals can be grown in two phases that are energetically quasi‐degenerate, the structure of which can be described as a pile‐up of 2D adenine planes. In each plane, the structure can be described as an aggregation of adenine dimers. Under certain conditions, kinetic effects can favor the growth of the less stable phase. These results have been used to understand the growth of adenine thin films on gold under ultra‐high vacuum conditions. We have found that the grown phase corresponds to the α‐phase, which is composed of stacked prochiral planes. In this way, the adenine nanocrystals exhibit a surface that is enantiopure. These results could open new insight into the applications of adenine in biological, medical, and enantioselective or pharmaceutical fields.