On-line on-chip post-column derivatisation reactions for pre-ionisation of analytes and cluster analysis in gradient micro-liquid chromatography/electrospray mass spectrometry

A system is presented that demonstrates the principle of on-line and on-chip post-column derivatisation reactions in micro-high-performance liquid chromatography (micro-HPLC) hyphenated to electrospray time-of-flight mass spectrometry (ESI-TOFMS). In this micro-HPLC-chip-MS set-up, the analytes are separated using gradient micro-HPLC and subsequently derivatised on-chip and detected. One of the major limitations of MS detection is its dependency on the degree of ionisation, which is widely variable and compound-specific. Optimising and controlling the degree of ionisation in a simple manner would allow MS detection to be truly generic. One way of achieving this is by pre-ionisation of analytes using simple derivatisation procedures that are both rapid and quantitative. Performing this in situ on the system described here overcomes issues of sample handling and efficiency losses when time-consuming "bench chemistry" is necessary prior to analysis. The power of the system is demonstrated by the separation of primary and secondary amines, which are subsequently derivatised with a positively charged phosphonium complex and detected in an enhanced manner. Typically, molecular cations (M(+)) are detected showing that the ionisation process is dominated by the phosphonium species, leading to more constant ionisation for a variety of compounds. In addition, stable isotopically labelled ((12)C/(13)C)-phosphonium reagent is used for the reactions, allowing for inherent signal/noise (S/N) improvement and automated data processing using cluster analysis. A similar reaction scheme is used for the derivatisation of ketones and aldehydes, also demonstrating dramatic increases in sensitivity, especially with increasing temperature. Minimal loss in chromatographic fidelity in terms of retention times is observed by the introduction of the micromixer chip into the system. Optimal flow rates in micro-HPLC and ESI-MS are compatible with flow rates for the chip as well as a multitude of in-line optical detectors including UV and fluorescence. In addition, the micromixer chip can be positioned pre-column if preferred. The system is robust, easily fully automated and applicable to a wide variety of reactions. The system has a major advantage in its simple robust connection to the "normal scale" outside world.     

Polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine in aprotic solvents I. Reaction variables

The solution polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine to form poly(amide acid amine) was investigated under a variety of reaction conditions. Polymer viscosity and gel formation were highly affected by changes in the order of monomer addition, the type of process (powder or solution), monomer concentration, monomer stoichiometry, and type of solvent. Minor effects were noted with changes in polymerization temperature and the presence of small amounts of water. A limiting intrinsic viscosity of 1.2–1.5 dl/g was observed, regardless of polymerization conditions. The polymerization had a strong tendency to gel at high concentrations and when monomer molar ratios approached 1:1. The conditions which retarded or promoted the formation of macrogel were well-defined, and macrogel but not microgel could be prevented. The polymerization was conducted successfully only in aprotic solvents. No imidazopyrrol-one units were detected in polymer made in polyphosphoric acid at elevated temperatures.     

Synthesis of a transition metal-dithionite complex, (η5-C5H5)(CO)2FeS(O)2S(O)2Fe(CO)2(η5-C5H5)

The reaction of Na[η⁵-C₅H₅Fe(CO)₂] with large excess of SO₂ in THF at ?78°C followed by warming to room temperature affords an iron—dithionite complex, (η⁵-C₅H₅)(CO)₂FeS(O)₂S(O)₂Fe(CO)₂(η⁵-C₅H₅).     

Photo-stabilising action of metal chelates in polypropylene—Part IV: Influence of metal stearates in an exchange mechanism

The effect of calcium and nickel stearates on the photo-stabilising action and photo-decomposition of one calcium and two nickel metal chelates in polypropylene has been examined using infra-red and ultraviolet derivative spectroscopy. Whereas the presence of calcium stearate antagonises the photo-stabilising action of one nickel chelate, Irgastab 2002, it strongly synergises with the other, Cyasorb UV 1084. The presence of nickel stearate synergises with the calcium chelate, Irganox 1425, in unprocessed polymer whereas, in processed polymer, it exhibits antagonism. Rates of photo-decomposition of the metal chelates are also affected by metal stearates. The data suggests that, with these nickel chelates, there might be some degree of metal exchange with certain metal stearates.     

Photo-stabilising action of metal chelates in polypropylene—Part I: Excited state quenching versus UV antioxidant action under polychromatic irradiation

The photo-stabilising action of three metal chelates—nickel (II) 2,2′ thiobis (4-tert-octylphenylato) n-butylamine and the nickel and calcium derivatives of bis (ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate, in polypropylene—is examined using normal and second order derivative ultraviolet, infra-red and phosphorescence spectroscopic techniques and hydroperoxide analysis. Whilst all three stabilisers quenched the phosphorescence emission of a powerful photo-sensitiser, benzophenone, there was no protective action during photo-sensitised oxidation of the polymer. In the case of anthraquinone, there was no quenching and no protection. Processing history plays a dominant rôle in controlling the photo-stabilising performance of the chelates. Each stabiliser operates differently, being dependent on its relative stability during processing and photo-oxidation and on the formation and destruction of polymeric and antioxidant hydroperoxides during processing. Metal chelates operate by inhibiting polymer hydroperoxide formation during processing and acting as ultraviolet stable chain terminators or by giving products during the early stages of photo-oxidation which are themselves effective stabilisers.     

Azetidinyl ketone chemistry. C-Methylation reactions and stereostructure - spectra relationships

The C-methylation of the potassium salt of 1-t-butyl-2-phenyl-3-(p-phenylbenzoyl)azetidine ( 1a ) with methyl iodide was studied in three solvents, and the stereochemical outcome of the reaction was shown to be dependent upon the solvent used. These results are rationalized in terms of the probable relative rates of the reaction in the various solvents and/or the effect of solvent on the structure of the anionic intermediate. Similar treatment of the potassium salt of 1-t-butyl-2-phenyl-3-benzoylazetidine ( 3a ) in ethyl ether gave a comparable result. The configurations of the epimeric C-methyl products ( 2a and 2b , and 4a ) were assigned on the basis of their spectral properties. With the aid of spectral data for a model compound, l-t-butyl-3-benzoyl-azetidine ( 5 ), several stereostructure-spectra relationships for 3-azetidinyl ketones are presented.     

Photo-stabilising action of metal chelate stabilisers in polypropylene: Part VII—Additive interactions

The interactions of three metal chelates (nickel (II) 2,2′-thiobis (4-tertoctyl-phenolato), n-butylamine (Cyasorb UV 1084) and the nickel and calcium derivatives of bis(ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate (Irgastab 2002 and Irganox 1425)) with other commercial additives, in the stabilisation of polypropylene film, are examined using normal and second-order derivative ultraviolet and infra-red spectroscopic techniques. It is shown that the observed behaviour is dependent on the particular additive, the processing history of the polymer and the metal chelate concerned, and is therefore highly complex. All three chelates show antagonism with a hindered piperidine, bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770), in unprocessed polymer, whereas one of the chelates behaves synergistically with this additive in processed samples. The chelates also show antagonism with a primary antioxidant, tris((3-(3′,5′-di-tert-butyl-4-hydroxybenzyl)-2′'-aceto-ethyl)) isocyanurate (Goodrite 3125), whereas, with a secondary antioxidant, distearyl pent-aerithrityl diphosphite (Weston 618), their behaviour is synergistic in both unprocessed and processed polymer. Two of the chelates show synergism with 2-hydroxy-4-n-octoxybenzophenone (Cyasorb UV 531), the remaining chelate showing antagonism. Mixtures containing a three-additive system show a more complex behaviour. The results are explained in terms of hydroperoxide decomposition, inhibition, stabiliser dispersion, ultraviolet stability and additive compatibility.     

The synthesis and chemistry of some bis-aziridinylketones and their spectral study

The synthesis and spectral characteristics of certain bis(1-alkyl-3-phenyl-2-aziridinyl)ketones are reported. The reactions of 1,2,4,5-tetrabromo-1,5-diphenyl-3-pentanone ( 2 ) with primary amines are assumed to have a mechanism similar to that of a simple dibromo-ketone. The so-called cis, cis- or trans, trans-configurations of the bis-aziridinylketones were determined by ¹H and ¹³C nmr spectra.     

The effect of electronegative atoms on the structures of hydrocarbons. ab initio calculations on molecules containing fluorine or (carbonyl) oxygen

A series of ab initio calculations have been carried out, using the 4-21G basis set. Ethane and propane were first studied to obtain reference points. The effect of adding an electronegative atom (fluorine, or carbonyl oxygen) onto the framework was then studied as a function of the torsional angle about the single bond. Some pronounced trends in structural changes were observed, and these can in part be correlated with hyperconjugative effects. For example, fluoroethane has bond lengths which are shorter than those in ethane itself, by 0.024 Åin the C C bond, and 0.003 Åin the α C H bonds. These changes are essentially torsionally independent. On the other hand, in propionaldehyde, the C C bond length of the methyl group and the C H bond lengths of the hydrogens attached to the alpha carbon vary as a function of the torsion angle. If the methyl C C bond in the carbonyl plane is taken as a reference, the bond stretches .016 Åwhen the torsion angle is increased to 90°, an α C H bond similarly stretches up to .007 Å. Many of these geometric changes are large, well beyond the experimental errors in modern measurements.     

Synthesis of 9-methyl-1H-[1,4]thiazino[3,2-g]quinoline-2,5,10(3H)-trione, the B,C,D ring core of the shermilamine alkaloids

Synthesis of 9-methyl-1H-[1,4]thiazino[3,2-g]quinoline-2,5,10(3H)-trione (4), from N-(4-bromo-2,5-dimethoxyphenyl)acetamide (23) is described. Oxidative cyclisation of 2,2'-disulfanediylbis[N-(2,5-dimethoxyphenyl)acetamide] (19) to 5,8-dimethoxy-2H-1,4-benzothiazin-3(4H)-one (7b) is also reported.