Determination of chemical form of antimony in contaminated soil around a smelter using X-ray absorption fine structure.

Only limited information is available about the behavior of antimony (Sb) in contaminated soils. However, understanding the behavior of Sb in contaminated soils is important, because the toxicity or solubility of this element depends on its chemical state. In this study, we investigated the levels of Sb and the chemical forms of Sb in the soil around a smelter using X-ray absorption fine structure (XAFS) spectra. The highest Sb concentration in the contaminated soil was 2900 mg/kg dry soil. According to Sb-K edge X-ray absorption near edge (XANE) spectra, the Sb in the soil was in the form of Sb(V) compounds. The similarity of extended XAFS (EXAFS) spectra suggests that Sb speciation was independent of the sampling site, which indicates that Sb or Sb2O3 emitted from the smelter was converted into Sb(V) compounds in the soil.     

Synthesis of fluoride garnets {Na3}[M3+2](Li3)F12 (M = Al,Cr, and Fe) from aqueous solution and their properties

The garnet-type fluorides, Na₃M₂Li₃F₁₂ (M = Al, Cr, and Fe) were synthesized as the coprecipitates of ～1 to 10 μm powders from HF solutions. The garnet structures were always obtained under acidic conditions. The incorporation of water molecules into the structure of the Cr and Fe garnets was observed. After heat treatment at 300°C, very small unknown peaks were observed in the X-ray powder pattern in addition to the garnet phase which had a slightly smaller value of the lattice constant than that of hydrous garnets. From the measurement of magnetic properties and Mössbauer effects, the Fe and Cr garnets were found to be paramagnetic with both ions in the trivalent state. Presentation of infrared spectra of the garnets is also included.     

A useful procedure for diiodination of carbazoles and subsequent efficient transformation to novel 3,6-bis(triethoxysilyl)carbazoles giving mesoporous materials

Bis(pyridine)iodonium tetrafluoroborate (IPy₂BF₄) was successfully used as a diiodination reagent for carbazole and its derivatives to give 3,6-diiodocarbazoles in excellent yield. Subsequent rhodium-catalyzed disilylation of 3,6-diiodocarbazoles with triethoxysilane gave the corresponding 3,6-bis(triethoxysilyl)carbazoles, which are precursors for sol-gel polymerization, in good yield.     

Determination of nickel in standard rocks and glasses by photon activation analysis with 30-MeV bremsstrahlung

The determination of nickel in various silicate rocks and glasses by photon activation analysis with a linear electron accelerator is described. Simultaneous irradiation of the sample and comparative standards produces the ⁵⁸Ni(γ, n)⁵⁷Ni reaction, and a post-irradiation chemical separation is used in conjunction with Ge(Li) γ-spectrometry. Nickel abundances for ten standard silicate rocks and two elementally doped glasses are presented and compared with the data previously published. The method is quite simple and gives good reproducible results for nickel down to sub-p.p.m. levels.     

Deuterium isotope effects on hydrophobic interactions: the importance of dispersion interactions in the hydrophobic phase

Hydrogen/deuterium isotope effects on hydrophobic binding were examined by means of reversed-phase chromatographic separation of protiated and deuterated isotopologue pairs for a set of 10 nonpolar and low-polarity compounds with 10 stationary phases having alkyl and aryl groups bonded to the silica surface. It was found that protiated compounds bind to nonpolar moieties attached to silica more strongly than deuterated ones, demonstrating that the CH/CD bonds of the solutes are weakened or have less restricted motions when bound in the stationary phase compared with the aqueous solvent (mobile phase). The interactions responsible for binding have been further characterized by studies of the effects of changes in mobile phase composition, temperature dependence of binding, and QSRR (quantitative structure-chromatographic retention relationship) analysis, demonstrating the importance of enthalpic effects in binding and differentiation between the isotopologues. To explain our results showing the active role of the hydrophobic (stationary) phase we propose a plausible model that includes specific contributions from aromatic edge-to-face attractive interactions and attractive interactions of aliphatic groups with the pi clouds of aromatic groups present as the solute or in the stationary phase.     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Optimization of a multi-residue screening method for the determination of 85 pesticides in selected food matrices by stir bar sorptive extraction and thermal desorption GC-MS

A multi-residue method to determine 85 pesticides, including organochlorine pesticides, carbamates, organophosphorus pesticides, and pyrethroids, in vegetables, fruit, and green tea, has been developed. The method is based on stir bar sorptive extraction (SBSE) coupled to thermal desorption (TD) and retention time locked (RTL) GC-MS operating in the scan mode. Samples are extracted with methanol and diluted with water prior to SBSE. Dilution of the methanol extract before SBSE was optimized to obtain high sensitivity and to minimize adsorption onto the glass wall of the extraction vessel as well as to minimize sample matrix effects (particularly for the pesticides with high log K(o,w) values). The optimized method consists of a dual SBSE extraction performed simultaneously on respectively a twofold and a fivefold diluted methanol extract. After extraction, the two stir bars are placed in a single glass thermal desorption liner and are simultaneously desorbed. The method showed good linearity (r2 > 0.9900) and high sensitivity (limit of detection: < 5 microg kg(-1)) for most of the target pesticides. The method was applied to the determination of pesticides at low microg kg(-1) in tomato, cucumber, green soybeans, spinach, grapes, and green tea.     

Resonance Raman spectra of β-carotene and its molecular structure in the excited electronic state

The resonance Raman spectra of β-carotene have been obtained at low temperature. The excitation profiles of ν₁ (1525 cm^?1) and 2ν₁ (3043 cm^?1) are analysed in terms of the Albrecht theory. The overlap integrals between the vibrational wavefunctions of the ground and the first excited electronic states are shown to be the most important factor in determining the resonance Raman intensities of this molecule. Information on the structure of the electronically excited state has been obtained.     

Aggregation and decomposition of a pseudoisocyanine dye in dispersions of layered silicates

The optical properties of reaction systems composed from a pseudoisocyanine (PIC) solution and dispersed layered silicates were studied using visible spectroscopy. Two series of reduced-charge montmorillonites were used as the silicate materials. Each series consisted of eight samples with different layer charges, which were prepared from one parent material. Observed trends were verified with another series of dioctahedral and trioctahedral smectites of different layer charges, structure, and origin. The layer charge density of the silicates significantly affected the aggregation of PIC cations. In addition to the formation of J-aggregates, dye spectral bleaching was also observed. Silicates with very low charge densities induced neither significant aggregation nor spectral bleaching of the dye. The highest levels of PIC J-aggregate formation were found in dispersions of the layered silicates with a medium surface charge. However, reversible spectral bleaching was also observed in some cases. PIC dye cations probably change their conformations during the adsorption process, due to the tension resulting from the large size of the cations and the relatively high charge density at the silicate surface. The bleached dye recovers, at least partially, with the rearrangement and redistribution of the dye cations over the time. In contrast, the presence of silicates with very high charge densities (synthetic taeniolite and fluorohectorite) led to the very fast and irreversible decomposition of the PIC. Perhaps, the tension in adsorbed dye cations, induced by the high charge density at the silicate surface, resulted in significant destabilization and a decomposition reaction of the chromophore.