Alternating copolymer of styrene–acrylonitrile obtained with vanadium-based complex catalyst in presence of monomers

Vanadium-based catalyst complexes prepared in the presence of monomers have been used for the copolymerization of styrene and acrylonitrile. VOCl₃–Al(i-C₄H₉)₃ catalyst system seems to yield an alternating copolymer. The copolymers are easily soluble in DMF and have low softening points.     

Kinetics of polyesterification: Effect of diol chain length

Kinetics of polyesterification of maleic anhydride with polyethylene glycol (PEG) of varying molecular weights have been evaluated. The investigations have been carried out by employing heating cycles comparable to those employed in industrial processes and under nonisothermal conditions. The rate of reaction was found to decrease with increase in the chain length of the polyether. The energy of activation was estimated as 26.91, 40.25, and 47.30 Kcal/mol for PEG of molecular weights 200, 300, and 400, respectively. © 1994 John Wiley & Sons, Inc.     

Photopolymerization of bis-aromatic and alicyclic based solid urethane acrylate macromonomer in the presence of large excess of reactive diluent

A solid urethane acrylate macromonomer with bis-aromatic as well as alicyclic moieties was synthesized and the kinetics of photopolymerization reactions were studied in the presence of varying concentration of photoinitiator and large excess of reactive diluent using photo DSC. The studies show that the rate of maximum polymerization was found to increase with increase in concentration of photoinitiator while a decrease was observed by an increase in temperature. The final conversion showed a decrease at highest isothermal condition due to vitrification. Estimation of kinetic parameters including applicability of autocatalytic and modified autocatalytic models were investigated by nonlinear regression. It was observed that the modified models gave a better fit with the experimental data and kinetic parameters showed a decrease with increase in temperature and an increase with increase in concentration of photoinitiator.     

Modulation in Techno-Functional,Textural Properties,In Vitro Starch Digestibility and Macromolecular–Structural Interactions of Pasta with Potato (Solanum tuberosum L.)

The replacement of semolina with potato flour (PF) and potato mash (PM) at different levels was assessed for its effects on pasta quality. The results showed that the addition of PF and PM increased the pasting viscosity of the blends; in addition, PF enhanced the functional properties, while PM reduced them. The minimum cooking time decreased with PF and PM, while the PF pasta exhibited a higher cooking loss (5.02 to 10.44%) than the PM pasta, which exhibited a lower cooking loss. The pasta with PF and PM showed an increase in the total phenolic and flavonoid content, with reduced in vitro digestibility as confirmed by Fourier transform infrared spectroscopy. The PF pasta exhibited lower lightness and higher yellowness than the PM pasta, and its firmness and toughness also modulated owing to the complex interaction between potato starches and the gluten protein matrix, as evident from scanning electron microscopy. Sensory data revealed that pasta containing 30% PF and 16% PM was highly acceptable.     

Photocytotoxic and anaerobic DNA cleavage activity of binuclear 3,3′-dithiodipropionic acid cobalt(II) complexes having phenanthroline bases

Dicobalt(II) complexes [{(B)Co^II}₂(μ-dtdp)₂] (1–3) of 3,3′-dithiodipropionic acid (dtdp) and phenanthroline bases (B), viz. 1,10-phenanthroline (phen in 1), dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq in 2) and dipyrido[3,2-a:2′,3′-c]phenazine (dppz in 3), have been prepared, characterized and their photo-induced anaerobic DNA cleavage activity studied. The elemental analysis and mass spectral data suggest binuclear formulation of the complexes. The redox inactive complexes have magnetically non-interacting dicobalt(II) core showing magnetic moment of ∼3.9 μ_B per cobalt(II) center. The complexes show good binding propensity to calf thymus DNA giving K_b values within 4.3 × 10⁵–4.0 × 10⁶ M⁻¹. Thermal melting and viscosity data predict DNA groove binding and/or partial intercalative nature of the complexes. The complexes show significant anaerobic DNA cleavage activity in green light under argon atmosphere possibly involving radical species generated from the disulfide moiety in a type-I pathway. The DNA cleavage reaction under aerobic medium in green light is found to involve hydroxyl radical species. The dppz complex 3 exhibits significant photocytotoxicity in HeLa cervical cancer cells with an IC₅₀ value of 2.3 μM in UV-A light of 365 nm, while it is essentially non-toxic in dark giving an IC₅₀ value of >200 μM. A significant reduction of the dark toxicity of the organic dppz base (IC₅₀ = 8.3 μM in dark) is observed on binding to the cobalt(II) center while essentially retaining its photocytotoxicity in UV-A light (IC₅₀ = 0.4 μM).     

DNA photocleavage and anticancer activity of terpyridine copper(II) complexes having phenanthroline bases

Copper(II) complexes [Cu(ph-tpy)(B)](ClO₄) (1–3), where ph-tpy is (4′-phenyl)-2,2′:6′,2″-terpyridine and B is N,N-donor phenanthroline base, viz. 1,10-phenanthroline (phen, 1), dipyridoquinoxaline (dpq, 2), and dipyridophenazine (dppz, 3), were prepared and characterized from analytical and spectral data. Complex 1, characterized by X-ray crystallography, shows a distorted square-pyramidal (4 + 1) CuN₅ coordination geometry having the tridentate ph-tpy ligand at the basal plane and bidentate phen bound to the axial-equatorial sites. The complexes display a d–d band near 650 nm in aqueous DMF. The complexes are avid binders to calf thymus DNA giving the binding order: 3 (dppz) > 2 (dpq) > 1 (phen). The dpq and dppz complexes show photo-induced DNA cleavage activity in red light via photo-redox pathway forming hydroxyl radicals. The cytotoxicity of the dppz complex 3 was studied by MTT assay in HeLa cancer cells. The IC₅₀ values are 3.7 and 12.4 μM in visible light of 400–700 nm and dark, respectively.     

Telechelic Poly(disulfide)s and Related Block Copolymer

In this communication, a mild, efficient, and generalized polycondensation route is developed for poly(disulfide)s from commercially available monomers 2,2′‐dithiodipyridine and 1,6‐hexanedithiol. Using the stoichiometric imbalance between the two monomers, it is possible to produce telechelic poly(disulfide)s of predictable molecular weight with reactive pyridyl disulfide groups at both the terminals of the chain. The two terminal pyridyl disulfide groups can be quantitatively replaced by a functional thiol using selective thiol‐disulfide exchange and thus produces functional telechelic poly(disulfide)s, which can be used as a macroinitiator to initiate ring‐opening poly­merization of a cyclic lactide monomer generating an ABA‐type triblock copolymer with degradable B block.

     

Combinatorial processing libraries for bulk BiFeO3–PbTiO3 piezoelectric ceramics

A high throughput approach for generating combinatorial libraries with varying processing conditions for bulk ceramics has been developed. This approach utilized the linear temperature gradient in a tube furnace to screen a whole temperature range for optimized preparation. With this approach, the processing of 0.98[0.6BiFeO₃–0.4PbTiO₃]–0.02Pb(Mg_1/3Nb_2/3)O₃ ceramic powders and pellets for high-temperature piezoelectric applications was demonstrated to identify the best synthesis conditions for phase purity. The dielectric property measurement on the as-processed solid solution ceramics confirmed the high Curie temperature and the improved loss tangent with the Pb(Mg_1/3Nb_2/3)O₃ doping.     

Structure-property correlation of CdSe clusters using experimental results and first-principles DFT calculations

Structures and properties of CdSe quantum dots (clusters) up to a diameter of approximately 2 nm were investigated by combining experimental absorption, photoluminescence (PL), and X-ray diffraction (XRD) spectroscopies as well as ab initio DFT calculations. These CdSe clusters were nucleated and grown from solutions containing respective cadmium and selenium precursors following the hot-injection technique that allows one to obtain size-controlled CdSe clusters having PL efficiency up to 0.5. The DFT calculations were performed at the B3LYP/Lanl2dz level and followed by time-dependent TDDFT calculations to estimate n energy singlet transitions. On the basis of the results of these experimental and theoretical studies, an approach to determine whether the proposed cluster with a mean diameter of approximately 2 nm is more physically reasonable is discussed. It was shown that the minimum nucleus of a CdSe cluster consists of (CdSe)(3) with a six-membered ring and planar structure. No PL is observed for this structure. The formation of the next stable cluster depends on whether hexadecylamine (HDA) was used for the growth of the CdSe clusters. In the absence of HDA, the second cluster was found to be (CdSe)(6) characterized by a broad PL spectrum, while in the presence of HDA, it was found to be (CdSe)(n) (where n > or = 14) with a sharp PL spectrum.