Electrochemical and spectral studies on the reductive nitrosylation of water-soluble iron porphyrin

The reaction of iron(III) (meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (Fe(III)TMPyP) with nitric oxide (NO) was studied by electronic absorption spectroscopy, ESR, and electrochemical and spectroelectrochemical techniques in aqueous solutions with pH from 2.2 to 12.0. Fe(III)TMPyP has been found to undergo a reductive nitrosylation in all pHs, and the product of nitric oxide binding to the porphyrin has been determined as iron(II) porphyrin nitrosyl complex ([Fe(II)(NO)TMPyP]). The rate of the reductive nitrosylation exhibits a tendency to get faster with increase in pH. An intermediate species was observed around neutral pH by spectroelectrochemical technique and was proposed to be the iron(II) nitrosyl complex of the mu-oxo dimeric form of FeTMPyP, which is known to be a predominant in neutral solutions.     

Copolymers of the C9 hydrocarbon fraction of liquid pyrolysis products with maleic anhydride and their esterification products as additives to paper pulp

The influence exerted by copolymers of the C₉ fraction of liquid pyrolysis products of petroleum raw materials with maleic anhydride and by their esterification products, added to paper pulp, on the main paper properties was examined.     

Synthesis of sterically hindered benzodioxane analogs of isoflavone and a study of their atropoisomerism

Syntheses are reported far sterically hindered 2-substituted benzodioxane analogs of isoflavone. An optically active lanthanide shift reagent (LSR) was used to show that these products exist as mixtures of atropoisomers. The difference in the chemical shifts of the enantiomeric protons in the presence of the LSR may reach 2–3 ppm with decreasing temperature. Conclusions were drawn concerning the structure of the LSR-substrate adducts and their conformations.Taras Shevchenko Kiev University, 252033 Kiev. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 902–908, July, 1996. Original article submitted March 27, 1996.     

Variable Mott-Schottky plots acquisition by potentiodynamic electrochemical impedance spectroscopy

Potentiodynamic electrochemical impedance spectroscopy provides extraction of potential-dependent space charge layer capacitance from potentiodynamic impedance spectra of non-stationary semiconductor–electrolyte interface. The new technique has been applied for acquisition of Mott-Schottky plots of cathodically treated TiO₂ anodic films. Cathodic treatment in 1 M H₂SO₄ increases donor density and flat band potential of TiO₂. Freshly doped films show hysteresis in the space charge layer capacitance in cyclic potential scans. The subsequent cycling eliminates the hysteresis but preserves the greater part of the doping effect. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16 March 2005     

Synthesis of hydroporphyrins based on comparative studies of palladium-catalyzed and non-catalyzed approaches

Hydroporphyrins have been synthesized using both Pd-catalyzed and non-catalyzed approaches. Comparative studies of the reaction of tetrasubstituted porphyrins with organolithium reagents in the presence of and without palladium catalysts showed that depending on reagents, the catalyst structure and reactivity of the corresponding porphyrins, chlorins (β-hydroporphyrins) and/or porphodimethenes (meso hydroporphyrins) of 5,10-type can be prepared in reasonable yields. In the absence of Pd catalysts, the formation of chlorins is predominant in the reactions with aliphatic RLi while porphodimethenes are the main products in reactions with PhLi. The use of a palladium catalyst resulted in the formation of both types of hydroporphyrins and the selective formation of either β-mono- or disubstituted chlorins. Of special interest was the reaction of octaethylporphyrin. Here, reaction with t-BuLi in the presence of Pd(PPh₃)₄/CuI proceeded with complete regioselectivity for 5,10-porphodimethenes.     

Oligonucleotides containing new fluorescent 1-phenylethynylpyrene and 9,10-bis(phenylethynyl)anthracene uridine-2′-carbamates: synthesis and properties

The synthesis of two novel fluorescent uridine-2′-carbamate phosphoramidites is described. The reagents carrying fluorescent polyaromatic hydrocarbons 1-phenylethynylpyrene (PEPy) or 9,10-bis(phenylethynyl)anthracene (BPEA) are suitable for oligonucleotide synthesis. Prepared oligonucleotide conjugates show strong dye emissions at 401 and 485 nm, but low FRET rate when located in the oligonucleotide duplex. The dyes show considerable compensation of the usual carbamate duplex destabilization. The possible explanation of both effects is binding of PEPy and BPEA to the minor groove of the DNA duplex.     

Abnormally mild synthesis of bis(dithiolo)pyrroles from 2,5-dimethylpyrroles

[chemical reaction: see text]. Treatment of N-substituted 2,5-dimethylpyrroles 2 with an equilibrated mixture of disulfur dichloride and DABCO in chloroform at 0 degrees C gives pentathiepinopyrroles 3 in moderate yields; further reaction of 3 with the same mixture at room temperature leads, in an extensive reaction cascade, to bis(dithiolo)pyrroles 4 in high yield; 2 can be converted into 4 in a one-pot operation under unusually mild conditions.     

Comparisons of NMR spectral quality and success in crystallization demonstrate that NMR and X-ray crystallography are complementary methods for small protein structure determination

X-ray crystallography and NMR spectroscopy provide the only sources of experimental data from which protein structures can be analyzed at high or even atomic resolution. The degree to which these methods complement each other as sources of structural knowledge is a matter of debate; it is often proposed that small proteins yielding high quality, readily analyzed NMR spectra are a subset of those that readily yield strongly diffracting crystals. We have examined the correlation between NMR spectral quality and success in structure determination by X-ray crystallography for 159 prokaryotic and eukaryotic proteins, prescreened to avoid proteins providing polydisperse and/or aggregated samples. This study demonstrates that, across this protein sample set, the quality of a protein's [15N-1H]-heteronuclear correlation (HSQC) spectrum recorded under conditions generally suitable for 3D structure determination by NMR, a key predictor of the ability to determine a structure by NMR, is not correlated with successful crystallization and structure determination by X-ray crystallography. These results, together with similar results of an independent study presented in the accompanying paper (Yee, et al., J. Am. Chem. Soc., accompanying paper), demonstrate that X-ray crystallography and NMR often provide complementary sources of structural data and that both methods are required in order to optimize success for as many targets as possible in large-scale structural proteomics efforts.     

New Tricyclic Amides. Synthesis,Structure, and Oxidation with Peroxyphthalic Acid

4-Azatricyclo[5.2.1.0^2,6]dec-8-ene was synthesized and brought into reactions with benzoyl, o-chlorobenzoyl, p-bromobenzoyl, p-, m-, and o-nitrobenzoyl, and bicyclo[2.2.1]hept-2-ene-endo-5,endo-6-dicarboximidoacetyl chlorides in chloroform in the presence of pyridine. The tricyclic amides thus obtained were epoxidated with peroxyphthalic acid prepared in situ by reaction of phthalic anhydride with a 35% aqueous solution of hydrogen peroxide. The structure of newly synthesized compounds was confirmed by IR and ¹H and ¹³C NMR spectroscopy and mass spectrometry. Their NMR spectra were compared with those of previously synthesized N-arylsulfonyl-4-azatricyclo[5.2.1.0^2,6]dec-8-enes on the basis of conformational composition of the corresponding p-nitrophenyl-substituted derivatives, which was determined by PM3 semi-empirical quantum-chemical calculations.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 6, 2005, pp. 837–845.Original Russian Text Copyright © 2005 by L. Kas’yan, Okovityi, Tarabara, A. Kas’yan, Bondarenko.     

Polyaniline and polypyrrole: A comparative study of the preparation

Aniline and pyrrole have been oxidized with ammonium peroxydisulfate in aqueous solutions, in the presence of equimolar quantities of hydrochloric acid. The oxidation of pyrrole was faster; the induction period typical of aniline oxidation was absent in the case of pyrrole. As the proportion of oxidant-to-monomer molar concentration increased up to 1.5, the yield increased in both cases. Similarities between the two oxidations are illustrated and discussed. The oxidant-to-monomer molar ratio 1.25 is proposed to be the optimum stoichiometry, in the accordance with the data published in the literature. The conductivities of the polymers prepared were only slightly dependent on the oxidant-to-monomer ratio in the range 0.3-1.5, and were of the order of 10⁰ S cm⁻¹ for polyaniline and ∼10⁻²-10⁻¹ S cm⁻¹ for polypyrrole. Outside this interval, the conductivity of both polymers was reduced. Polyaniline having conductivity ∼10 S cm⁻¹ was produced in solutions of phosphoric acid of various concentrations. On the contrary, the conductivity of polypyrrole was reduced as the concentration of phosphoric acid became higher. The type of protonation is discussed with the help of FTIR spectra by analyzing the ammonium salts obtained after deprotonation. Sulfate or hydrogen sulfate anions produced from peroxydisulfate always constitute a part of the counter-ions.