Effects of Bis(aromatic) Pendants on Recognition of Nucleobase Thymine by Zn2+ -1,4,7,10-tetraazacyclododecane (Zn2+ -cyclen)

We have previously shown that the nucleobase thymine binding to Zn²⁺ -cyclen (cyclen=1,4,7,10-tetraazacyclododecane) complex became stronger by appending acridine, naphthalene, or quinoline rings to the cyclen. Amongst these, the pendant bis((1-naphthyl)methyl) or bis((4-quinolyl)methyl) groups yielded the most effective thymine-recognizing Zn²⁺ -cyclen complexes [J. Am. Chem. Soc., 121 (1999) 5426]. The present study was undertaken to find causes of the bis(aromatic) ring effect by X-ray crystal structure analysis and NMR studies. The crystal structure of the Zn²⁺ -bis((1-naphthyl)methyl)-cyclen complex with a deprotonated 1-methylthymine (1-MeT) failed to show the anticipated evidence for the double ~ - ~ stacking interactions between the two naphthalenes and the Zn 2+ -bound 1-MeT m (1-MeT m =N(3')-deprotonated 1-MeT). Crystal data: formula C₃₆ H₄₇ N₇ O₇ Zn, M r =755.19, monoclinic, space group P2₁/ c (No. 14), a =15.438(2) Å, b =14.093(3) Å, c =16.726(2) Å, g =90.53(1) V =3638.7(8) Å 3 Z =4, R =0.035, R _w =0.049. However, the ¹H NMR studies of Zn²⁼ -bis((4-quinolyl)methyl)-cyclen with 1-MeT in varying H₂O/CH₃ CN solution showed increasing upfield shifts of Me(5') and H(6') of the Zn²⁺ -bound 1-MeT in more aqueous media, indicating that the double intercalation with the two quinolines became more significant in more protic environments. We conclude that the double ~ - ~ stacking effect accounts for the enhanced recognition of thymine base by the appended bis((1-naphthyl)methyl) or bis((4-quinolinyl)methyl) groups.     

Reactions of Neomycin B under Mitsunobu Conditions: A Correction of the Literature

Reaction of N‐Boc neomycin with triphenylphosphine and diissopropyl azodicarboxylate in either toluene or THF results in an epoxide in ring IV, not an aziridine or azetidine as previously reported.     

Data and device protection: A ToF‐SIMS,wetting, and XPS study of an Apple iPod nano

An important aspect of the robustness of an electronic device is its ability to resist water, fingerprints, dirt, and smudges that may compromise its ability to function and/or the information within it. Here, we report a chemical analysis by ToF‐SIMS, wetting, and XPS of the surfaces in a commercially available Apple iPod nano (8GB, MC525LL/A), which showed good resistance to its environment. This analysis reveals that the front panel (touchscreen) of the device is coated with a low free energy fluorinated polymer that may consist of short segments of a fluorinated hydrocarbon connected through ether linkages. No other part of the device appears to have this hydrophobic coating. A plasma treatment of the device leads to a deterioration of its performance. This work demonstrates how different analytical techniques can complement each other and contribute to a better understanding of a surface or a material. Copyright © 2013 John Wiley & Sons, Ltd.     

Biomonitoring of infant exposure to phenolic endocrine disruptors using urine expressed from disposable gel diapers

Infant exposure to endocrine disruptors (EDs) may cause adverse health effects because of their fast growth and development during this life stage. However, collecting urine from infants for exposure assessment using biological monitoring is not an easy task. For this purpose, we evaluated the feasibility of using urine expressed from disposable gel absorbent diapers (GADs) as a matrix for biomonitoring selected phenolic EDs. GADs urine was expressed with the assistance of CaCl₂ and was collected using a device fabricated in our laboratory. The analytes were extracted and concentrated using a liquid-liquid method and their hydroxyl groups were modified by dansyl chloride to enhance their chromatography and detection. Finally, the analytes were measured by high-performance liquid chromatography (HPLC) coupled with electrospray ionization (ESI) tandem mass spectrometry (MS/MS). The target chemicals were bisphenol A, triclosan, 17 α-ethynylestradiol, the natural hormone estrone, and 17 β-estradiol. The ratio of the CaCl₂ to the urine-wetted gel absorbent, variation of the inter-urination volume, and analyte deposition bias in the diaper were assessed. Analyte blank values in the diapers, the sample storage stabilities, and recoveries of the analytes were also evaluated. The results showed that 70–80 % of the urine could be expressed from the diaper with the assistance of CaCl₂ and 70.5–124 % of the spiked analytes can be recovered in the expressed urine. The limits of detections (LODs) were 0.02–0.27 ng/mL, well within the range for detection in human populations. Our pilot data suggest that infants are widely exposed to the selected EDs.     

Order-Unity 13C Nuclear Polarization of [1-13C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of ¹³C₁ spins of [1-¹³C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H₂O. Order-unity ¹³C (>50 %) polarization of catalyst-bound [1-¹³C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-¹³C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD₃OD. Efficient ¹³C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T₁ spin-relaxation rates (e. g., ∼0.2 s⁻¹ versus ∼0.1 s⁻¹, respectively, for a 6 mM catalyst-[1-¹³C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-¹³C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-¹³C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.     

Slow-light fourier transform interferometer

We describe a new type of Fourier transform (FT) interferometer in which the tunable optical delay between the two arms is realized by using a continuously variable slow-light medium instead of a moving arm as in a conventional setup. The spectral resolution of such a FT interferometer exceeds that of a conventional setup of comparable size by a factor equal to the maximum group index of the slow-light medium. The scheme is experimentally demonstrated by using a rubidium atomic vapor cell as the tunable slow-light medium, and the spectral resolution is enhanced by a factor of approximately 100.     

Observation of B-->eta'K* and evidence for B+-->eta'rho+

We present an observation of B-->eta'K*. The data sample corresponds to 232x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. We measure the branching fractions (in units of 10(-6)) B(B(0)-->eta'K*0)=3.8+/-1.1+/-0.5 and B(B+-->eta'K*+)=4.9(1.7)(+1.9)+/-0.8, where the first error is statistical and the second systematic. A simultaneous fit results in the observation of B-->eta'K* with B(B-->eta'K*)=4.1(-0.9)(+1.0)+/-0.5. We also search for B-->eta'rho and eta'f(0)(980)(f(0)-->pi+pi-) with results and 90% confidence level upper limits B(B+-->eta'rho+)=8.7(-2.8-1.3)(+3.1+2.3) (<14), B(B(0)-->eta'rho0)<3.7, and B(B(0)-->eta'f(0)(980)(f(0)-->pi+pi-))<1.5. Charge asymmetries in the channels with significant yields are consistent with zero.