Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of phantom materials for use in quality assurance of microbeam radiation therapy

Microbeam radiation therapy (MRT) is a promising radiotherapy modality that uses arrays of spatially fractionated micrometre‐sized beams of synchrotron radiation to irradiate tumours. Routine dosimetry quality assurance (QA) prior to treatment is necessary to identify any changes in beam condition from the treatment plan, and is undertaken using solid homogeneous phantoms. Solid phantoms are designed for, and routinely used in, megavoltage X‐ray beam radiation therapy. These solid phantoms are not necessarily designed to be water‐equivalent at low X‐ray energies, and therefore may not be suitable for MRT QA. This work quantitatively determines the most appropriate solid phantom to use in dosimetric MRT QA. Simulated dose profiles of various phantom materials were compared with those calculated in water under the same conditions. The phantoms under consideration were RMI457 Solid Water (Gammex‐RMI, Middleton, WI, USA), Plastic Water (CIRS, Norfolk, VA, USA), Plastic Water DT (CIRS, Norfolk, VA, USA), PAGAT (CIRS, Norfolk, VA, USA), RW3 Solid Phantom (PTW Freiburg, Freiburg, Germany), PMMA, Virtual Water (Med‐Cal, Verona, WI, USA) and Perspex. RMI457 Solid Water and Virtual Water were found to be the best approximations for water in MRT dosimetry (within ±3% deviation in peak and 6% in valley). RW3 and Plastic Water DT approximate the relative dose distribution in water (within ±3% deviation in the peak and 5% in the valley). PAGAT, PMMA, Perspex and Plastic Water are not recommended to be used as phantoms for MRT QA, due to dosimetric discrepancies greater than 5%.     

Percentile residual life orders

In this paper we study a family of stochastic orders of random variables defined via the comparison of their percentile residual life functions. Some interpretations of these stochastic orders are given, and various properties of them are derived. The relationships to other stochastic orders are also studied. Finally, some applications in reliability theory and finance are described. Copyright © 2010 John Wiley & Sons, Ltd.     

Dendritic effect in polymer-supported catalysis of the intramolecular Pauson-Khand reaction

A remarkable increase in catalytic activity and selectivity in the intramolecular Pauson-Khand reaction is observed for Co complexes, immobilised on second- and third-generation dendron-functionalized polystyrene, as compared with their analogues on non-dendronized support.     

Aqueous enantioselective hydrogenation of methyl 2-acetamidoacrylate with Rh-MeDuPHOS occluded in PDMS

A new chiral heterogeneous catalytic system obtained by occlusion of the Rh-MeDuPHOS complex in a polydimethylsiloxane film was tested in the asymmetric hydrogenation of methyl 2-acetamidoacrylate in aqueous medium.     

Analytic solution for the nondegenerate quantum control problem

We present an analytic solution for the nondegenerate quantum control problem, i.e., the transfer of a deliberate amount of population, 0%-100%, between arbitrary initial Psi(t)> and final Psi'(t)> states, which can be expanded in terms of nondegenerate energy eigenstates k>. The solution constitutes a robust two-photon multicomponent adiabatic passage, via an intermediate eigenstate 0>, which relies on three types of "null states."     

Finite generation of powers of ideals

Suppose is a maximal ideal of a commutative integral domain and that some power of is finitely generated. We show that is finitely generated in each of the following cases: (i) is of height one, (ii) is integrally closed and , (iii) is a monoid domain over a field , where is a cancellative torsion-free monoid such that , and is the maximal ideal . We extend the above results to ideals of a reduced ring such that is Noetherian. We prove that a reduced ring is Noetherian if each prime ideal of has a power that is finitely generated. For each with , we establish existence of a -dimensional integral domain having a nonfinitely generated maximal ideal of height such that is -generated.

     

On parallel asynchronous high-order solutions of parabolic PDEs

In achieving significant speed-up on parallel machines, a major obstacle is the overhead associated with synchronizing the concurrent processes. This paper presents high-orderparallel asynchronous schemes, which are schemes that are specifically designed to minimize the associated synchronization overhead of a parallel machine in solving parabolic PDEs. They are asynchronous in the sense that each processor is allowed to advance at its own speed. Thus, these schemes are suitable for single (or multi) user shared memory or (message passing) MIMD multiprocessors. Our approach is demonstrated for the solution of the multidimensional heat equation, of which we present a spatial second-order Parametric Asynchronous Finite-Difference (PAFD) scheme. The well-known synchronous schemes are obtained as its special cases. This is a generalization and expansion of the results in [5] and [7]. The consistency, stability and convergence of this scheme are investigated in detail. Numerical tests show that although PAFD provides the desired order of accuracy, its efficiency is inadequate when performed on each grid point.In an alternative approach that uses domain decomposition, the problem domain is divided among the processors. Each processor computes its subdomain mostly independently, while the PAFD scheme provides the solutions at the subdomains' boundaries. We use high-order finite-difference implicit scheme within each subdomain and determine the values at subdomains' boundaries by the PAFD scheme. Moreover, in order to allow larger time-step, we use remote neighbors' values rather than those of the immediate neighbors. Numerical tests show that this approach provides high efficiency and in the case which uses remote neighbors' values an almost linear speedup is achieved. Schemes similar to the PAFD can be developed for other types of equations [3].This research was supported by the fund for promotion of research at the Technion.