Facile solvent-free synthesis and structural elucidation of styrylcyclohex-2-enone derivatives

A remarkably efficient procedure for the synthesis of styrylcyclohex-2-enone derivatives at room temperature is described using a mild reaction medium consisting of lithium perchlorate and N-(trimethylsilyl)diethylamine. Several compounds of this class are synthesized conveniently and rapidly. Spectroscopic and X-ray diffraction experiments confirm the proposed structures.     

Surface Properties of Low Density Polyethylene upon Low-Temperature Plasma Treatment with Various Gases

The surface of a LDPE was modified by Ar, O₂, N₂, CO₂ gaseous plasma. The changes in surface morphology and surface wettability were investigated using AFM and SEM. The surface chemical changes of LDPE were also characterized by FTIR-ATR. The SEM and AFM results demonstrated variable changes in surface roughness for different types of plasma gas used, the changes being more for the Ar and N₂ plasma treatments. Considering the nature of the LDPE film, XRD studies were carried out to determine changes in the percentage crystalinity. The results showed that all low pressure O₂, Ar, N₂, CO₂ gas plasmas improved the wettability of LDPE films. Contact angles decreased significantly depending on the discharge powers and exposure times. Surface morphology was also found to vary with plasma discharge powers, exposure times, and the type of gas being used. Ar and N₂ gas plasmas in general produced more superior results.     

Highly selective transport of silver ion through a supported liquid membrane using calix[4]pyrroles as suitable ion carriers

Facilitated transport of silver ion across a supported liquid membrane (SLM) by calix[4]pyrroles, as selective ion carriers, dissolved in kerosene has been investigated. The influences of fundamental parameters affecting the transport of silver ion including ion carrier concentration in the membrane phase, thiosulfate concentration in strip phase, picric acid concentration in the feed phase, stirring speed of aqueous phases, type of membrane solvent and time of transport have been studied. In the presence of thiosulfate as a suitable metal ion acceptor in the strip phase and picrate ion as ion pairing agent in the source phase, transport of silver occurs almost quantitatively after 75 min. The selectivity and efficiency of silver transport from aqueous solution containing Cu²⁺, Mg²⁺, Ni²⁺, Ca²⁺, Zn²⁺, Pb²⁺, Co²⁺, Al³⁺, Hg²⁺, Cd²⁺, Fe³⁺, Fe²⁺ and Cr³⁺ were investigated.     

Preparation and characterization of novel thermostable polyamides bearing different photoactive pendent architectures with antibacterial properties

Three diamine monomers with different derivatives of imidazole heterocyclic ring, aryl ethers and electron withdrawing trifluoromethyl groups in the backbone were synthesized and used in polycodensation reaction with various aliphatic and aromatic dicarboxylic acids for preparation of a series of novel polyamides(PAs). The PAs were obtained in high yields and possessed inherent viscosities in the range of 0.26-0.75 d L/g. All of the polymers were amorphous in nature,showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents. They showed good thermal stability with glass transition temperatures between 162-302 ℃. Thermogravimetric analysis showed that all polymers were stable, with 10% weight loss recorded above 421 ℃ in N_2 atmospheres. All the PAs presented fluorescence upon irradiation with ultraviolet light and thus showed promise for applications in electroluminescent devices. The monomers and PAs were also screened for antibacterial activity against Gram positive and Gram negative bacteria.     

Stabilization of active fault‐tolerant control systems by uncertain nonhomogeneous markovian jump models

This article investigates the stabilization and control problems for a general active fault‐tolerant control system (AFTCS) in a stochastic framework. The novelty of the research lies in utilizing uncertain nonhomogeneous Markovian structures to take account for the imperfect fault detection and diagnosis (FDD) algorithms of the AFTCS. The underlying AFTCS is supposed to be modeled by two random processes of Markov type; one characterizing the system fault process and the other describing the FDD process. It is assumed that the FDD algorithm is imperfect and provides inaccurate Markovian parameters for the FDD process. Specifically, it provides uncertain transition rates (TRs); the TRs that lie in an interval without any particular structures. This framework is more consistent with real‐world applications to accommodate different types of faults. It is more general than the previously developed AFTCSs because of eliminating the need for an accurate estimation of the fault process. To solve the stabilizability and the controller design problems of this AFTCS, the whole system is viewed as an uncertain nonhomogeneous Markovian jump linear system (NHMJLS) with time‐varying and uncertain specifications. Based on the multiple and stochastic Lyapunov function for the NHMJLS, first a sufficient condition is obtained to analyze the system stabilizability and then, the controller gains are synthesized. Unlike the previous fault‐tolerant controllers, the proposed robust controller only needs to access the FDD process, besides it is easily obtainable through the existing optimization techniques. It is successfully tested on a practical inverted pendulum controlled by a fault‐prone DC motor. © 2016 Wiley Periodicals, Inc. Complexity 21: 318–329, 2016     

Surfactant-assisted transport of lead ion through a bulk liquid membrane containing dicyclohexyl-18-crown-6: efficient removal of lead from blood serum and sea water

The selective and efficient surfactant assisted transport of Pb²⁺ ions using a bulk liquid membrane composed of dicyclohexyl-18-crown-6, as a highly selective carrier, in chloroform solution is reported. In the presence of 6.0 × 10^?2 M P₂O₇ ^4? ions and 10^?3 M sodium dodecylsulfate, as suitable stripping agent and membrane/receiving phase interface modifier, respectively, in the receiving phase and 2.4 × 10^?3 M picric acid, as a counter ion in the source phase, the amount of lead transported across the liquid membrane after 5 h is 100.0 ± 1.1. The designed transport system was successfully applied to the removal of lead from sea water and blood serum samples.     

Synthesis and characterization of new fluorinated photoactive polyamides based on xanthene pendant: Evaluation of antibacterial and heavy metal ions removal behavior

A series of novel organosoluble polyamides (PAs) bearing different functional groups such as flexible ether, substituted imidazole, and xanthene rings and electron-withdrawing CF₃ groups were synthesized from diamines and various dicarboxylic acids. The structures of diamines and PAs were fully characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T₁₀%) in the range of 184–277°C and 410–480°C in N₂ atmosphere, respectively. These polymers showed fluorescence emission upon irradiation with UV light. Diamine compounds and two of synthesized polymers were also screened for antibacterial activity against gram-positive and gram-negative bacteria, and the obtained results for all four combinations showed good inhibition. Extraction capability for heavy metal ions such as Cr³⁺, Pb²⁺, Hg²⁺, Cd²⁺, and Co²⁺ from aqueous solutions was also tested at 25°C and pH 7–8.     

Chiral separation of three agrochemical toxins enantiomers by high-performance liquid chromatography on a vancomycin crystalline degradation products-chiral stationary phase

This work aims to evaluate for the enantiomeric separations of three agrochemical toxins: haloxyfop-methyl, fenoxaprop-p-ethyl and indoxacarb on crystalline degradation products-chiral stationary phase (CDP-CSP) of high-performance liquid chromatography (HPLC) under normal and polar organic phases. In the normal phase, the mobile phase was n-hexane with alcohols including methanol and isopropanol as polar modifiers. In the polar organic phase mode, the mobile phase was methanol with different percentages of triethylammunium acetate. The influence of flow rate (0.3-0.9 mL/min), analyte concentration and silica gel particle sizes (10, 15 and 30 microm) was investigated. This new chiral stationary phase showed excellent stereoselectivity for the two enantiomers of haloxyfop-methyl and fenoxaprop-p-ethyl and chiral recognition for indoxacarb under normal-phase mode. However, under polar organic phase, only indoxacarb was separated (alpha < 1.5). The chromatographic results were compared with commercial chiral columns.     

Chiral selectors for enantioresolution and quantitation of the antidepressant drug fluoxetine in pharmaceutical formulations by (19)F NMR spectroscopic method

¹⁹F NMR spectroscopy was applied to the quantitative determination of fluoxetine enantiomers using different chiral recognition agents in pharmaceutical formulations. Several parameters affecting the enantioresolution including the type and concentration of chiral selector, concentration of fluoxetine and temperature were studied. The chiral selectors investigated are the cyclic oligosaccharides α-, β- and γ-cyclodextrin and a diamino derivative of methylated α-cyclodextrin (DAM-α-CD), linear polysaccharides (maltodextrin with dextrose equivalents of 4.0-7.0, 13.0-17.0 and 16.5-19.5) and the macrocyclic antibiotic vancomycin. Among the chiral selectors used, DAM-α-CD turned out to give the best resolution of the ¹⁹F NMR signals of (R)- and (S)-fluoxetine. The calibration curve was linear for (R)- and (S)-fluoxetine over the range 0.10-1.35 mg mL⁻¹, the detection limits (S/N = 3) being 5.9 and 7.5 μg mL⁻¹ for the pure solutions of (R)- and (S)-fluoxetine, respectively. The recovery studies performed on pharmaceutical samples ranged from about 90 to 110% with relative standard deviations of <8%. The results showed that the proposed method is rapid, precise and accurate. Applying statistical Student's t-test revealed insignificant difference between the real and measured contents at the 95% confidence level.