Co-detection of Copper and Lead in Artisanal Sugarcane Spirit Using Caffeic Acid-modified Graphite Electrodes

Caffeic acid (CA)-modified graphite electrodes [GE/poly(CA)] was applied to the co-detection of copper and lead in artisanal sugarcane spirit using square-wave anodic stripping voltammetry (SWASV). Electrochemical and morphological studies were performed, and a mechanism for polymerization was proposed. Electropolymerization, SWASV, and analysis conditions parameters were optimized. Interferents, repeatability, reproducibility, and addition and recovery tests were carried out. GE/poly(CA) shows a linear range from 15 to 705 μg/L with a limit of detection of 3.01 μg/L for Pb(II) and 4.50 μg/L for Cu(II). Real samples of artisanal sugarcane spirit were used, and the electrochemical results were compared with atomic absorption spectroscopy experiments.     

Influence of laser photobiomodulation upon connective tissue remodeling during wound healing

The modulation of collagen fibers during experimental skin wound healing was studied in 112 Wistar rats submitted to laser photobiomodulation treatment. A standardized 8mm-diameter wound was made on the dorsal skin of all animals. In half of them, 0.2ml of a silica suspension was injected along the border of the wound in order to enhance collagen deposition and facilitate observation. The others received saline as vehicle. The treatment was carried out by means of laser rays from an aluminum-gallium arsenide diode semiconductor with 9mW applied every other day (total dose=4J/cm(2)) on the borders of the wound. Tissue sections obtained from four experimental groups representing sham-irradiated animals, laser, silica and the association of both, were studied after 3, 7, 10, 15, 20, 30 and 60 days from the laser application. The wounded skin area was surgically removed and submitted to histological, immunohistochemical, ultrastructural, and immunofluorescent studies. Besides the degree and arrangement of collagen fibers and of their isotypes, the degree of edema, the presence of several cell types especially pericytes and myofibroblasts, were described and measured. The observation of Sirius-red stained slides under polarized microscopy revealed to be of great help during the morphological analysis of the collagen tissue dynamic changes. It was demonstrated that laser application was responsible for edema regression and a diminution in the number of inflammatory cells (p<0.05). An evident increase in the number of actin-positive cells was observed in the laser-treated wounds. Collagen deposition was less than expected in silica-treated wounds, and laser treatment contributed to its better differentiation and modulation in all irradiated groups. Thus, laser photobiomodulation was able to induce several modifications during the cutaneous healing process, especially in favoring newly-formed collagen fibers to be better organized and compactedly disposed.     

The stability of exceptional bundles on complete intersection -folds

A very long-standing problem in Algebraic Geometry is to determine the stability of exceptional vector bundles on smooth projective varieties. In this paper we address this problem and we prove that any exceptional vector bundle on a smooth complete intersection -fold of type with and is stable.

     

Micro‐EDXRF study of Chalcolithic copper‐based artefacts from Southern Portugal

A collection of 39 metallic artefacts recovered in archaeological sites of Southern Portugal was studied by micro‐EDXRF to identify their compositions and the use of metal among ancient communities. Artefacts presented different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to 2500–2000 BC. The results show copper with variable amounts of As and very low content of other impurities, such as Fe, Pb or Sb. Moreover, nearly half of the collection is composed by arsenical copper alloys, and an association was found between arsenic content and typology because the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic‐rich copper ores or smelting products. Finally, the compositions were compared to those of other collections from neighbouring regions and different chronology to determine metallurgical parallels. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of Ethylene/1‐Olefin Copolymers Made with Ziegler–Natta Catalysts by Deconvolution of Molecular Weight and Average Short Chain Branching Distributions

In this article a systematic method is proposed to deconvolute the time‐dependent molecular weight distributions (MWD) and average comonomer fraction profiles of ethylene/1‐olefin copolymers made with heterogeneous Ziegler–Natta catalysts. These distributions with a high‐temperature gel permeation chromatography equipped with an infrared detector at four different polymerization times have been measured and used this information to infer how the fractions of polymer made on each site type varied with polymerization time. The model estimates here the minimum number of active site types needed to describe these copolymers, the MWD of polymer populations made on each site type, and their average comonomer fractions. This method is useful to quantify the microstructure of olefin copolymers made with multiple site type catalysts using the least number of adjustable parameters.

     

“Living” Free Radical Polymerization in Tubular Reactors. I. Modeling of the Complete Molecular Weight Distribution Using Probability Generating Functions

This is the first of a series of works aiming at developing a tool for designing “living” free radical polymerization processes in tubular reactors, in order to achieve tailor‐made MWDs. A mathematical model of the nitroxide‐mediated controlled free radical polymerization is built and implemented to predict the complete MWD. It is shown that this objective may be achieved accurately and efficiently by means of the probability generating function (pgf) transformation. Comparison with experimental data is good. The potential of the resulting model for optimization activities involving the complete MWD is also shown.

     

Soliton solutions for quasilinear Schrödinger equations: The critical exponential case

Quasilinear elliptic equations in R²${\mathbb{R}}^2$ of second order with critical exponential growth are considered. By using a change of variable, the quasilinear equations are reduced to semilinear equations, whose respective associated functionals are well defined in H¹(R²)$H^1\left({\mathbb{R}}^2\right)$ and satisfy the geometric hypotheses of the mountain pass theorem. Using this fact, we obtain a Cerami sequence converging weakly to a solution v$v$. In the proof that v$v$ is nontrivial, the main tool is the concentration–compactness principle [P.L. Lions, The concentration compactness principle in the calculus of variations. The locally compact case. Part I and II, Ann. Inst. H. Poincaré Anal. Non. Linéaire 1 (1984) 109–145, 223–283] combined with test functions connected with optimal Trudinger–Moser inequality.     

Light-driven horseradish peroxidase cycle by using photo-activated methylene blue as the reducing agent

In this work, the regeneration of native horseradish peroxidase (HRP), following the consecutive reduction of oxo-ferryl pi-cation (compound I) and oxo-ferryl (compound II) forms, was observed by UV-visible spectrometry and electron paramagnetic resonance (EPR) in the presence of methylene (MB+), in the dark and under irradiation. In the dark, MB+ did not affect the rate of HRP compound I and II reduction, compatible with hydrogen peroxide as the solely reducing species. Under irradiation, the dye promoted a significant increase in the native HRP regeneration rate in a pH-dependent manner. Flash photolysis measurements revealed significant redshift of the MB+ triplet absorbance spectrum in the presence of native HRP. This result is compatible with the dye binding on the enzyme structure leading to the increase in the photogenerated MB* yield. In the presence of HRP compound II, the lifetime of the dye at 520 nm decreased approximately 75% relative to the presence of native HRP that suggests MB* as the heme iron photochemical reducing agent. In argon and in air-saturated media, photoactivated MB+ led to native HRP regeneration in a time- and concentration-dependent manner. The apparent rate constant for photoactivated MB+-promoted native HRP regeneration, in argon and in air-saturated medium and measured as a function of MB+ concentration, exhibited saturation that is suggestive of dye binding on the HRP structure. The dissociation constant (KMB) observed for the binding of dye to HRP was 5.4+/-0.6 microM and 0.57+/-0.05 microM in argon and air-saturated media, respectively. In argon-saturated medium, the rate of the conversion of HRP compound II to native HRP was significantly higher, k2argon=(2.1+/-0.1)x10(-2) s(-1), than that obtained in air-equilibrated medium, k2air=(0.73+/-0.02)x10(-2) s(-1). Under these conditions the efficiency of photoactivated MB(+)-promoted native HRP regeneration was determined in argon and air-equilibrated media as being, respectively: k2/KMB=3.9x10(3) and 12.8x10(3) M(-1) s(-1).     

Development and Validation of QuEChERS Followed by UHPLC-ToF-MS Method for Determination of Multi-Mycotoxins in Pistachio Nuts

Pistachios are one of the types of tree nut fruits with the highest mycotoxin contamination, especially of aflatoxins, worldwide. This study developed a Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method that was followed by Ultra-High Performance Liquid Chromatography combined with Time-of-Flight Mass Spectrometry (UHPLC–ToF-MS) for the determination of mycotoxins in pistachios. Different approaches to dispersive solid phase extraction as a clean-up method for high lipid matrices were evaluated. For this, classic sorbents such as C18 (octadecyl-modified silica) and PSA (primary secondary amine), and new classes of sorbents, namely EMR-Lipid (enhanced matrix removal-lipid) and Z-Sep (modified silica gel with zirconium oxide), were used. The QuEChERS method, followed by Z-Sep d-SPE clean-up, provided the best analytical performance for aflatoxins (AFB1, AFB2, AFG1 and AFG2), ochratoxin A (OTA), zearalenone (ZEA), toxin T2 (T2) and toxin HT-2 (HT2) in pistachios. The method was validated in terms of linearity, sensitivity, repeatability, interday precision and recovery; it achieved good results according to criteria imposed by Commission Regulation (EC) no. 401/2006. The method was applied to real samples and the results show that pistachios that are available in Portuguese markets are safe from mycotoxins that are of concern to human health.     

Thermal Stability of Biodegradable Films Based on Soy Protein and Corn Starch

Summary: In this paper, films were prepared from soy protein and corn starch in different proportions and thermal stability and kinetic parameters were determined through degradation reactions in an inert atmosphere. Solid residues and decomposition products were identified by infrared spectroscopy. Films from corn starch were less thermally stable than soy protein films. The films containing both components had lower thermal stabilities when compared to those of the pure biopolymers. The mechanism of starch thermal degradation seems to occur in a single step, which can be confirmed by the constant E-values during the thermal degradation reaction. For the pure protein and its mixtures an increase in the activation energy was observed during the reaction. Solid residues for protein at different temperatures showed mainly bands related to CO stretching, angular deformation of N H and C H groups. For starch, absorptions related to free and bound O H, CO stretching of CO₂, CO and carbonyl compounds were observed. For the 50/50 mixture bands related to soy protein and corn starch were observed. The gaseous products for soy protein showed absorptions related to CO₂, CO, CO, NH₃ and C H stretching. For pure starch absorptions related to O H stretching from alcohol, CO from CO₂, CO and carbonyl compounds. The 50/50 mixture had the same characteristics as pure soy protein and corn starch.