Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Synthesis and derivatization of daptomycin: a chemoenzymatic route to acidic lipopeptide antibiotics

Daptomycin is a branched cyclic nonribosomally assembled acidic lipopeptide, which is the first clinically approved antibiotic of this class. Here we show that the recombinant cyclization domain of the Streptomyces coelicolor calcium-dependent antibiotic (CDA) nonribosomal peptide synthetase (NRPS) is a versatile tool for the chemoenzymatic generation of daptomycin derivatives. Linear CDA undecapeptide thioesters with single exchanges at six daptomycin-specific residues were successfully cyclized by CDA cyclase. Simultaneous incorporation of all six of these residues into the peptide backbone and elongation of the N-terminus of CDA by two residues yielded a daptomycin derivative that lacked only the beta-methyl group of l-3-methylglutamate. Bioactivity studies with several substrate analogues revealed a significant role of nonproteinogenic constituents for antibacterial potency. In accordance with acidic lipopeptides, the bioactivity of the chemoenzymatic assembled daptomycin analogue is dependent on the concentration of calcium ions. Single deletions of the four acidic residues in the peptide backbone suggest that only two aspartic acid residues are essential for antimicrobial potency. These two residues are strictly conserved among other nonribosomal acidic lipopeptides and the EF-motif of ribosomally assembled calmodulin. Based on these findings CDA cyclase is a versatile catalyst that can be used to generate novel daptomycin derivatives that are otherwise difficult to obtain by chemical modification of the parental tridecapeptide to improve further its therapeutic activity.     

Structure elucidation of β-carotene isomers by HPLC-NMR coupling using a C30 bonded phase

The separation of cis/trans isomers of β-carotene has been performed with a C₃₀ stationary phase employing ¹H NMR spectroscopy as an on-line detection technique. 1D as well as 2D NMR spectra have been recorded in the stopped-flow mode for the predominant chromatographic peaks. Structural assignment of the five identified isomers was performed via comparison of simulated 1D ¹H NMR spectra on the basis of the structures of β-carotene cis/trans isomers with the experimental data, and also by the analysis of the proton-proton connectivities in the 2D NMR spectra of three isomers with the highest concentration. The chromatographic retention behaviour of the isomers agreed well with previously reported data. The advantage of the applied hyphenated coupling technique compared to conventional off-line techniques lies in the fact that chromatographic separation and NMR detection are performed in a closed system, so that reisomerization of the separated compounds is inhibited. Received: 29 May 1996 / Revised: 1 July 1996 / Accepted: 4 July 1996     

Rationalisation of unusual changes in efficiency and retention with temperature shown for bases in reversed-phase high-performance liquid chromatography at intermediate pH

Despite the possibility of poorer peak shapes, analysis of pharmaceuticals and other bases using reversed-phase high-performance liquid chromatography (RP-HPLC) at intermediate pH gives useful increases in retention, selectivity and column loading capacity compared with low pH. Retention times of some bases showed anomalous increases with column temperature. Peak shapes for bases improved significantly at elevated temperature (up to 70 degrees C), with the weakest bases studied (pKa approximately 8) giving greater improvement than the strongest bases (pKa approximately 10). In contrast, quaternary ammonium compounds showed reduced retention with increasing column temperature (normal behaviour) and only modest improvements in peak shape. Considering these results, and pKa measurements of the bases made using capillary electrophoresis, it appears that increases in retention and improvement in efficiency may be influenced significantly by reduction in the pKa of bases with temperature, leading to reduction in protonation. It is less likely that efficiency improvements are due to the speeding up of the kinetics of silanol ion exchange, at least in the temperature range studied here.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Vibrational spectra of Hg3TeO6 and Hg2TeO5

The infrared and Raman spectra of the crystalline hexaoxotellurates Hg3TeO6 and Hg2TeO5 were recorded and discussed on the basis of a site symmetry analysis derived from known structural data. Approximate values for the Te-O bond force constants are reported and some comparisons with related species are made.     

Investigation of homo- and heterodimer alkali metal cation complexes of resorc[4]arenes by electrospray ionization mass spectrometry

Resorc[4]arenes are compounds with interesting properties, mainly because of their ability to form host-guest complexes with the guest located inside the cavity. The size of the guest limits the complexation, as shown by a competition experiment with tetraalkylammonium ions of different size. By electroscopy ionization tandem mass spectrometric experiments on resorc[4]arene heterodimers bearing an alkali metal ion as guest, it was found that there must be two different binding mechanisms for alkali metal ions with high surface charge density (Li(+) and Na(+)) on the one hand compared with those with a lower surface charge density on the other hand (K(+), Rb(+), Cs(+)).     

Reinvestigation of the Conformation of Cyclosporin A in Chloroform

New investigations of cyclosporin A in CDCl₃ have been performed to obtain additional and more accurate distance restraints than utilized in our previous studies of cyclosporin A. Build-up rates at 600 MHz using 6 different mixing times at low temperatures (252.5 K) were determined and transformed into distances using the two-spin approximation. With the new distance restraints in the MD simulations using the GROMOS package, we can unambiguously conclude the presence of a βII′-turn. The new structure resembles the X-ray structure more than the structure previously determined, especially regarding the orientation of the MeBmt side chain. In the new structure and in the solid state, the side chain is folded over the backbone (although there are substantial differences in the χ₁ torsion), in contrast to the old structure, where the side chain is extended away from the backbone.     

Synthesis of enantiopure axially chiral C3-symmetric tripodal ligands and their application as catalysts in the asymmetric addition of dialkylzinc to aldehydes

The enantioselective synthesis of a novel-type C(3)-symmetric tripodal ligand that is composed of a central mesitylene-derived core and three functionalized, axially chiral biaryl subunits is described. The triol (M,M,M)-3 is a suitable catalyst for the enantioselective addition of dialkylzinc to various aromatic aldehydes with asymmetric inductions of up to 98% ee.     

Stereochemistry of isoplagiochin C, a macrocyclic bisbibenzyl from liverworts

Cyclic bisbibenzyls, like isoplagiochins C (1) and D (2), are stereochemically intriguing molecules: Although not equipped with any of the traditional stereogenic elements that render molecules conformationally stable per se, they are sometimes isolated in an optically active form and are thus chiral at room temperature. The paper describes quantum chemical calculations, in particular investigations of the conformational space and molecular dynamics simulations, showing that the helicity is a property of the entire molecule, whose ring strain makes the molecule configurationally stable overall, with (formally) three stereogenic elements (two biaryl axes and one helical stilbene unit). Only one of the biaryl axes (the 'upper' one, joining C-12' and C-14) has a stable configuration, leading to a population of four interconverting diastereomers, yet without racemization at room temperature. On the basis of these conformational and dynamic calculations, the circular dichroism spectrum of isoplagiochin C (1) was calculated, leading to the first assignment of the absolute configuration of a cyclic bisbibenzyl. Accordingly, 1 has the P-configuration at the stereochemically stable biaryl axis and constitutes a mixture of diastereomers with respect to the other biaryl axis and the helical stilbene unit. From the temperature dependence of the racemization rates, an enantiomerization barrier of 101.6 kJ/mol was determined. Likewise, for the first time for cyclic bisbibenzyls, the enantiomeric ratio of this natural product was determined, by chromatography on a chiral phase with CD-coupling. Accordingly, 1 from Plagiochila deflexa is not enantiomerically pure, but occurs in a 85:15 ratio in favor of the enantiomer that has the P-configuration at the stereochemically stable axis.