Quasi-steady model of the acoustic scattering properties of a T-junction

T-junctions are common elements in flow duct networks. It is shown that for low Strouhal numbers, based on the duct diameter, their acoustic scattering properties can be described using an incompressible quasi-steady model. Models are derived for systems subjected to combinations of grazing and bias mean flow, and are shown to work in both the limiting cases—that is, grazing or bias flow alone—as well as for the joining or dividing flow configurations. The upper Strouhal number for which the quasi-steady models are applicable is limited by flow-acoustic interaction effects, which differ significantly between the different flow configurations. Generally the models are applicable up to Strouhal numbers of approximately 0.1-0.2, which is comparable with previous published models for other configurations such as bends and orifices. This range is sufficient to make the model useful in many important engineering applications.     

Subwavelength terahertz spin-flip laser based on a magnetic point-contact array

We present a theoretical design for a single-mode, truly subwavelength terahertz disk laser based on a nanocomposite gain medium comprising an array of normal-metal/ferromagnetic (FM) point contacts embedded in a thin dielectric layer. Stimulated emission of light occurs due to spin-flip relaxation of spin-polarized electrons injected from the FM side of the contacts. Ultrahigh electrical current densities in the contacts and a dielectric material with a large refractive index, neither condition being achievable in conventional semiconductor media, enables the thresholds of lasing to be overcome for the lowest-order modes of the disk, making single-mode operation possible.     

Synthesis of tetrahydroisoquinoline (TIQ)–oxazoline ligands and their application in enantioselective Henry reactions

A novel family of eleven new tetrahydroisoquinoline (TIQ)–oxazoline intermediates and five corresponding copper(II) catalysts has been developed and applied to the catalytic asymmetric Henry reaction of various aldehydes with nitromethane to provide β-hydroxy nitroalkanes in high conversion (>99%). This paper describes the synthesis of the TIQ compounds from l-dihydroxyphenylalanine (l-DOPA) as the starting material. The chiral ligands were complexed in situ with various transition metals such as Cu, Sc, Co, Zn, Ni and Mn and tested as a chiral catalyst for the Henry reaction. The reaction was optimized in terms of the metal, counter ion, solvent, temperature and over a range of substrates. The corresponding catalyst with copper(II) acetate and 2-propanol as the solvent provides the best enantioselectivities (up to 77% ee) of the corresponding nitroalcohol for 4-chlorobenzaldehyde.     

Compound‐specific bromine isotope analysis of brominated diphenyl ethers using gas chromatography multiple collector/inductively coupled plasma mass spectrometry

The bromine isotope composition is potentially diagnostic in both degradation monitoring and source apportionment of organobromines in the environment. A method for compound‐specific bromine isotope analysis (δ⁸¹Br) based on gas chromatography multiple collector inductively coupled plasma mass spectrometry (GC/ICPMS) was developed for common brominated diaromatic compounds. Brominated diphenyl ethers (BDEs) in Bromkal 70‐5DE, a technical flame‐retardant mixture containing mainly BDEs #47, #99 and #100, were used as test substances, with standard bracketing for the samples achieved through co‐injected monobromobenzene (MBB) with a known δ⁸¹Br of ?0.39‰ vs. Standard Mean Ocean Bromine (SMOBr). Three different heated transfer lines were constructed and tested to achieve efficient conduction of the BDEs from the gas chromatograph to the ICPMS instrument. The MBB was analyzed with a precision of 0.4‰ (1 s, n = 18). The precision for BDEs was 1.4–1.8‰ (1 s, n = 10–12 depending on the congener). The lower precision for the BDEs than for MBB may reflect the heat required to prevent condensation of the analytes in ICP torch assembly. The use of an internal standard of similar chemical structure to the analytes alleviates this problem, as illustrated by a difference of 0.3 ± 0.7‰ (1 s, n = 6) between the δ⁸¹Br values of co‐injected methoxy BDE‐47 and BDE‐47 extracted from whale blubber. Improvements in precision and accuracy may be achieved by the use of a more efficient heating of the torch assembly in conjunction with a set of internal standards that match the target compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of tetrahydroisoquinoline-diamine ligands and their application in asymmetric transfer hydrogenation

The use of the tetrahydroisoquinoline scaffold is well documented in biologically active compounds. However, reports of the utilisation of tetrahydroisoquinoline compounds in asymmetric catalysis are limited. The synthesis of novel diamine ligands possessing the tetrahydroisoquinoline (tetrahydroisoquinoline) backbone and evaluation of their activity in the asymmetric transfer hydrogenation of acetophenone are presented. The diamine ligands in conjunction with i-PrOH as the hydrogen source and [RhCl₂(Cp1)]₂ as the metal precursor proved to be the most effective of the tetrahydroisoquinoline derivatives for this catalytic system. Water was found to have a profound influence on the enantioselectivity of the reaction. Optimisation of the amount water, i-PrOH and catalytic loading content rendered the best result of 70% enantioselectivity for the (S)-1-phenylethanol isomer product.     

Comparison of the efficiency of different GLC multi-residue methods on crops containing pesticide residues

Summary The efficiency of the extraction methods with acetone and with ethyl acetate are compared with regard to the multi-pesticide residue determination in fruits and vegetables. The ethyl acetate-method gave higher recoveries for polar pesticides and seems somewhat easier, quicker and cheaper in handling but some co-extractives in the GC-extract are observed. In general, both methods gave acceptable and equivalent recoveries for the pesticides tested.     

A dynamic model to determine vibrations in involute helical gears

A method to determine the dynamic load between two rotating elastic helical gears is presented. The stiffness of the gear teeth is calculated using the finite element method and includes the contribution from the elliptic distributed tooth load. To make sure that the new incoming contacts which are the main excitation source are properly simulated, the necessary deformation of the gears is determined by using the true geometry and positions of the gears for every time step of the dynamic calculation. This allows the contact to be positioned outside the plane of action. A numerical example is presented with figures that show the behaviour of the dynamic transmission error as well as the variation of the contact pressure due to the dynamic load for different rotational speeds.     

Numerical simulation and laser-based imaging of mixture formation, ignition, and soot formation in a diesel spray

Laser-based imaging of fuel vapor distribution, ignition, and soot formation in diesel sprays was carried out in a high-pressure, high-temperature spray chamber under conditions that correspond to temperature and pressure in a diesel engine. Rayleigh scattering and laser-induced incandescence are used to image fuel density and soot volume fraction. The experimental results provide data for comparison with numerical simulations. An interactive cross-sectionally averaged spray model based on Eulerian transport equations was used for the simulation of the spray, and the turbulence-chemistry interaction was modeled with the representative interactive flamelet (RIF) concept. The flamelet calculation is coupled to the Kiva3V computational fluid dynamics (CFD) code using the scalar dissipation rate and pressure as an input to the RIF-code. The flamelet code computes the instationary flamelet profiles for every time step. These profiles were integrated over mixture fraction space using a prescribed β-PDF to obtain mean values, which are passed back to the CFD-code. Thereby, the temperature and the relevant species in each CFD-cell were obtained. The fuel distribution, the average ignition delay as well as the location of ignition are well predicted by the simulation. Furthermore, simulations show that the experimentally observed injection-to-injection variations in ignition delay are due to temperature inhomogeneities. Experimental and simulated spatial soot and fuel vapor density distributions are compared during and after second stage ignition.     

REMPI as a tool for studies of OH radicals in catalytic reactions

2 +? O₂→H₂O on polycrystalline Pt foils has been studied by detection of desorbing OH radicals using the Resonance Enhanced Multiphoton Ionization, REMPI, technique. The measurements were performed at catalyst temperatures of 1000–1400 K and a total pressure below 10^-4 mbar. The studies of OH desorption by REMPI were achieved using a two-photon excitation D²Σ^-–X²Π (1–0), followed by one-photon ionization. The ions were detected in a time-of-flight mass spectrometer, TOF-MS, in order to avoid interference from non-resonantly ionized molecules. By applying TOF-MS, a simultaneous non-resonant ionization and detection of H₂, O₂ and H₂O was achieved. Recorded REMPI spectra were compared with spectra simulated using known molecular constants. The kinetics of the reaction derived from the measurements were compared with what was obtained in earlier LIF detection of OH, performed at higher total reactant pressure using the A–X transition. REMPI TOF-MS is shown to be a complement to LIF for reaction studies below 5×10^-4 mbar total pressure, where LIF is too insensitive for quantification. The reaction kinetics was found to be in agreement with a theoretic model and previous LIF studies. Received: 8 March 1996/Revised version: 4 October 1996