Thiophene‐cored 2,2‐bis(methylol)propionic acid dendrimers for optical‐power‐limiting applications

The synthesis and characterization of dendron‐coated 2,5‐bis(phenylethynyl)thiophene chromophores are described. The dendrimers were grown divergently on the arylthiophene core with the versatile anhydride of 2,2‐bis(methylol)propionic acid. The arylthiophene core was synthesized with Sonogashira coupling reactions. Structurally well‐defined dendrimers up to the fourth generation were grown, as confirmed by size exclusion chromatography, NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight analysis. The different dendritic substitution did not influence the absorption spectra of the compounds in or near the visible region. Solutions of arylthiophenes had good transparency at wavelengths greater than 400 nm. The dendritic thiophenes exhibited an optical‐power limit at the laser wavelength of 532 nm. However, the magnitude of the optical‐power limit of these compounds was slightly lower than that of a nondendritic arylthiophene with n‐pentyl substituents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1177–1187, 2005     

UV‐photodimerization in uracil‐substituted dendrimers for high density data storage

Two series of uracil‐functionalized dendritic macromolecules based on poly (amidoamine) PAMAM and 2,2‐bis(hydroxymethylpropionic acid) bis‐MPA backbones were prepared and their photoinduced (2π+2π) cycloaddition reactions upon exposure to UV light at 257 nm examined. Dendrimers up to 4th generation were synthesized and investigated as potential materials for high capacity optical data storage with their dimerization efficiency compared to uracil as a reference compound. This allows the impact of increasing the generation number of the dendrimers, both the number of chromophores, as well as the different steric environments, on the performance of each series of dendrimers to be investigated. The (uracil)₁₂‐[G‐2]‐bis‐MPA and (uracil)₈‐[G‐1]‐PAMAM were observed to have high dimerization efficiency in solution with different behavior being observed for the PAMAM and bis‐MPA dendrimers. The dendrimers with the best dimerization efficiency in solution were then examined in the solid state as thin films cast on quartz plates, and their film qualities along with their photodimerization performance studied. High quality films with a transmission response of up to 70% in 55 s. when irradiated at 257 nm with an intensity of 70 mW/cm² could be obtained suggesting future use as recording media for optical data storage. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4401–4412, 2007     

Subpicosecond hard x-ray streak camera using single-photon counting

We have developed and characterized a hard x-ray accumulating streak camera that achieves subpicosecond time resolution by using single-photon counting. A high repetition rate of 2 kHz was achieved by use of a readout camera with built-in image processing capabilities. The effects of sweep jitter were removed by using a UV timing reference. The use of single-photon counting allows the camera to reach a high quantum efficiency by not limiting the divergence of the photoelectrons.     

Application of nanoparticles for the enhancement of latent fingerprints

Two different types of nanoparticles dissolved in organic solution, gold stabilized by n-alkanethiols and CdSe/ZnS stabilized by n-alkane-amine, adhere preferentially to the ridges of latent fingerprints; the gold deposits catalyze silver electroless deposition from "Silver Physical Developer" (Ag-PD), an aqueous solution containing silver colloids stabilized by cationic surfactants, to form dark impressions of the ridge details; the hydrophobic capped gold nanoparticles significantly improve the intensity and clarity of the developed prints compared with Ag-PD alone; finger marks treated with CdSe/ZnS nanoparticles can be viewed directly, due to their fluorescence under UV illumination.     

Co-Treatment of Purified Annatto Oil (Bixa orellana L.) and Its Granules (Chronic®) Improves the Blood Lipid Profile and Bone Protective Effects of Testosterone in the Orchiectomy-Induced Osteoporosis in Wistar Rats

This study aimed to evaluate and compare the effects of co-treatment with purified annatto oil (PAO) or its granules (GRA, Chronic^®) with that of testosterone on the orchiectomy-induced osteoporosis in Wistar rats. After surgery, rats were treated from day 7 until day 45 with testosterone only (TES, 7 mg/kg, IM) or TES + PAO or GRA (200 mg/kg, p.o.). The following parameters were evaluated: food/water intake, weight, HDL, LDL, glucose, triglycerides (TG), total cholesterol (TC), alkaline phosphatase levels, blood phosphorus and calcium contents, femur weight, structure (through scanning electron microscopy), and calcium content (through atomic absorption spectrophotometry). Our results show that orchiectomy could significantly change the blood lipid profile and decrease bone integrity parameters. Testosterone reposition alone could improve some endpoints, including LDL, TC, bone weight, and bone calcium concentration. However, other parameters were not significantly improved. Co-treatment with PAO or GRA improved the blood lipid profile and bone integrity more significantly and improved some endpoints not affected by testosterone reposition alone (such as TG levels and trabeculae sizes). The results suggest that co-treatment with annatto products improved the blood lipid profile and the anti-osteoporosis effects of testosterone. Overall, GRA had better results than PAO.     

Optical fiber refractometers based on indium tin oxide coatings fabricated by sputtering

This Letter presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings deposited by sputtering with response in the visible region. ITO thin films have been sputtered by means of a rotating mechanism that enables the fabrication of smooth and homogeneous coatings onto the optical fiber core. The ITO coating acts as a resonance supporting layer. This permits us to couple light from the waveguide to the ITO-coating/external medium region at specific wavelength ranges. The device is sensitive to external medium refractive index, which allows its utilization as a refractometer. The sensitivity is dependent on the coating thickness, ranging from 523.21 to 1221 nm/refractive index unit in the explored sensors. The sensor development process is time effective compared to other techniques such as dip coating or layer-by-layer self-assembly, which is interesting in terms of mass production.     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.     

Lectin from Canavalia brasiliensis seeds (ConBr) is a valuable biotechnological tool to stimulate the growth of Rhizobium tropici in vitro

To study the interactions between a Rhizobium tropici strain and lectins isolated from the seeds of Canavalia ensiformis (ConA) and Canavalia brasiliensis (ConBr), a lectin fluorescence assay was performed. In addition, an experiment was designed to evaluate the effect of the two lectins on bacterial growth. Both lectins were found to bind to R. tropici cells, but the interactions were inhibited by D-mannose. Interestingly, only ConBr stimulated bacterial growth in proportion to the concentrations used (15.6-500 μg/mL), and the bacterial growth stimulation was inhibited by D-mannose as well. Structure/Function analyses by bioinformatics were carried out to evaluate the volume and carbohydrate recognition domain (CRD) configuration of ConA and ConBr. The difference of spatial arrangement and volume of CRD may indicate the variation between biological activities of both lectins. The results suggest that ConBr could be a promising tool for studies focusing on the interactions between rhizobia and host plants.     

The Home Care Crew Scheduling Problem: Preference-based visit clustering and temporal dependencies

In the Home Care Crew Scheduling Problem a staff of home carers has to be assigned a number of visits to patients’ homes, such that the overall service level is maximised. The problem is a generalisation of the vehicle routing problem with time windows. Required travel time between visits and time windows of the visits must be respected. The challenge when assigning visits to home carers lies in the existence of soft preference constraints and in temporal dependencies between the start times of visits.     

Mesomorphic properties of linear and branched new triphenylene-based poly(ester-ether)s

A series of main chain discotic liquid crystal polymers, synthesized following a new approach based on the incorporation of triphenylene units in both comonomers, show ordered columnar mesophases in a very wide thermal range, including room temperature. The introduction of branching points based on the same kind of triphenylene units increases their thermal range and gives rise to glassy low-temperature phases. Room temperature extrusion of these polymers yields fibers with molecules oriented perpendicular to the mechanical stress, and an orientational order parameter close to 0.5, which slightly increases for branched polymers.