Rhodamine B amine as a highly sensitive fluorescence derivatization reagent for saccharides in reversed-phase liquid chromatography

6-Rhodamine B amine functions as a highly sensitive fluorescence derivatization reagent for mono- and oligosaccharides; it reacts with the reducing end of saccharides under acidic conditions. The fluorescent derivatives of five monosaccharides can be separated within 25 min by reversed-phase liquid chromatography with isocratic elution. The detection limits (S/N = 3) for mono-, di-, and oligosaccharides are 7-51, 13, and 9-35 fmol/20 microl injection, which correspond to analyte concentrations of 35-255, 65, 45-175 nM, respectively. We have applied this derivatization method successfully to the analysis of the components of oligosaccharides in glycoproteins (ribonuclease B and fetuin) following their acidic or enzymatic hydrolysis. The results from these analyses are in good agreements with the reported values established previously.     

Screening method for organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine based on intramolecular excimer-forming fluorescence derivatization

A simple screening method of organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine is described. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, 4-(1-pyrene)butanoic acid hydrazide (PBH). Dicarboxylic acids in urine were converted to the corresponding dipyrene-labeled derivatives by reaction with PBH in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and pyridine, and the derivatives afforded intramolecular excimer fluorescence (420-540 nm) which can clearly be discriminated from the normal fluorescence (360-420 nm) emitted from reagent blanks. The technique is so selective that it permits spectrofluorometric measurement of total amount of dicarboxylic acids by the direct derivatization of diluted urine samples. The same reaction mixture has also served as a liquid chromatographic (LC) sample for the separative determination of individual dicarboxylic acids. The spectrofluorometric data did not contradict with the LC data. These methods were usefully applied to preliminary screening test of glutaric aciduria. In conclusion, the present derivatization method allows rapid and direct determination of total amount of dicarboxylic acids in human urine samples.     

Three-component coupling using arynes and isocyanides: straightforward access to benzo-annulated nitrogen or oxygen heterocycles

A variety of aldehydes, ketones, benzoquinones, or sulfonylimines were found to couple with arynes and isocyanides, giving iminodihydroisobenzofuran or iminoisoindoline derivatives of structural diversity in a straightforward manner. Nucleophilic addition of isocyanides to arynes, a first step of the three-component coupling, was proved to be reversible by the reaction of an unsymmetrical aryne.     

On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 2. Relationship between lipophilicity and antibacterial activity in 5-thiocarbonyl oxazolidinones

5-Thiourea and 5-dithiocarbamate oxazolidinones were synthesized as a continuation of research on 5-thiocarbonyl oxazolidinone antibacterial agents considering the hydrophobic parameters of the molecule. The structure-activity relationship (SAR) study revealed that the antibacterial activity on 5-thiocarbonyl oxazolidinones was significantly affected by the lipophilicity, especially the calculated log P value and the balance between 5-hydrophilic (or hydrophobic) substituent and hydrophobic (or hydrophilic) substituents on the benzene ring. Some of 5-thiocarbonyl oxazolidinones were found to have good in vitro antibacterial activity against gram-positive bacteria including methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE).     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Carbapenem and penem antibiotics. VI. Synthesis and antibacterial activity of 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl 1-methylcarbapenems

The synthesis and antibacterial activity of the 1-methylcarbapenems, 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl derivatives having a 6-[(R)-1-hydroxyethyl] side chain, are described. The introduction of a methyl substituent at the C-1 position was accomplished by a newly developed procedure using crotyl halides and zinc dust. The 2-hydroxymethyl carbapenems as key intermediates allowed an easy entry into the preparation of title carbapenems.     

High-performance liquid chromatographic identification of disaccharides generated from heparan sulphate isomers using heparitinases

Specific heparan sulphate-lyases, heparitinases I and II, were used to identify unsaturated disaccharide constituents generated from heterogeneous heparan sulphate isomers. All determinations were made using high-performance liquid chromatography with a column containing a sulphonized styrene-divinylbenzene copolymer. Unsaturated disaccharides generated from variously sulphated heparan sulphate isomers after simultaneous digestion with heparitinases I and II facilitated separation of the individual disaccharides, based on sulphate groups at the specific position of the uronic acid and glucosamine residues. The simultaneous digestion with heparitinases I and II produces unsaturated disaccharides from heparan sulphate isomers with the structure of 4-deoxy-2-O-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-amino-deoxy-D-glucose, 4-deoxy-2-O-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-deoxy-2-sulphamido-D-glucose, 4-deoxy-2-O-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-aminodeoxy-6-O-sulpho-D-glucose, 4-deoxy-2-O-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-deoxy-2-sulphamido-6-O-sulpho-D-glucose, 4-deoxy-2-O-sulpho-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-amino-2-deoxy-6-O-sulpho-D-glucose and 4-deoxy-2-O-sulpho-alpha-L-threo-hex-4-enepyranosyluronic acid (1----4)-2-deoxy-2-sulphamido-6-O-sulpho-D-glucose.     

The temperature dependence of the zero-field splitting of trimethylenemethane

Trimethylenemethane was generated by γ-irradiating polycrystalline methylenecyclopropane, and studied by EPR at various temperatures. The zero-field splitting constant, D, was observed to change from 0.0260 cm^?1 at 4 K to 0.0212 cm^?1 at 126 K, though the hyperfine coupling showed little temperature dependence.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.