Synthesis, spectral and electrochemical studies of Cu(II) and Ni(II) complexes with new N2O2 ligands: a new precursor capable of depositing copper nanoparticles using thermal reduction

Cu(II) and Ni(II) complexes of the general type [M(N2O2)] are described. The N2O2 ligands used are [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,3-diamine] (HOMeSalpn) and [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,2-diamine (HOMeSalpr). These complexes have been characterized by IR, UV-vis, CV, TG-DTA and 1H NMR spectroscopy. The electrochemical behavior of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Cu(II)-Cu(I) and Ni(II)-Ni(I) is electrochemically irreversible. The new copper complexes have been applied for the preparation of copper nanoparticles using non-ionic surfactant (Triton X-100) by thermal reduction. The copper nanoparticles with average size of 48nm were formed by thermal reduction of [N,N'-bis(2-hydroxy-6-methoxybenzylidene)propane-1,3-diamine]copper(II) in the presence of triphenylphosphine thus releasing the reduced copper and affording the high-purity copper nanoparticles.     

Oxidation of 1,4-Dihydropyridines under Mild and Heterogeneous Conditions

A combination of NaHSO₄.H₂O and NaNO₂ in the presence of wet SiO₂ was used as an effective oxidizing agent for the oxidation of dihydropyridines to their corresponding pyridine derivatives at room temperature with excellent yields.     

Modeling chlorite-iodide reaction dynamics using a chlorine dioxide-iodide reaction mechanism

The mechanism of Lengyel, Li, Kustin, and Epstein (J. Am. Chem. Soc. 1996, 118, 3708) for the oscillatory chlorine dioxide-iodide reaction accurately models the reaction in closed and open systems. We investigated whether this mechanism minus the single reaction involving chlorine dioxide models the chlorite-iodide reaction equally well. It agrees qualitatively with clock reaction results. As for open system dynamics, the mechanism predicts the existence of two steady states and bistability in very nearly the same regions where these features are found experimentally in the pH range 2-4. A discrepancy in the range of bistability emerges as pH decreases, and it cannot be remedied by taking into account chlorous acid decomposition. That we were unable to locate an oscillatory region is of greater significance. Because the chlorite-iodide reaction is sensitive to mixing effects, we incorporated a two-parameter model of imperfect mixing but still found no oscillations at physically reasonable parameter values. These discrepancies strongly suggest that to obtain predictive utility for the chlorite-iodide reaction, revision of the chlorine dioxide-iodide mechanism is required.     

Estimation of binding constants between ristocetin and teicoplanin and peptides using on-column ligand derivatization coupled to affinity capillary electrophoresis

This work utilizes on-column ligand synthesis and affinity capillary electrophoresis (ACE) to determine binding constants (K_b) of 9-flourenylmethyloxy carbonyl (Fmoc)-amino acid derivatives to the glycopeptide antibiotics ristocetin (Rist) and teicoplanin (Teic). In this technique, two separate plugs of sample are injected on to the capillary column and electrophoresed. The initial sample plug contains a d-Ala-d-Ala terminus peptide and either one or two non-interacting standard(s). The second plug contains a Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester. The electrophoresis is then carried out with an increasing concentration of Rist or Teic in the running buffer. Upon electrophoresis the initial d-Ala-d-Ala peptide reacts with the Fmoc-amino acid yielding a new Fmoc-amino acid-d-Ala-d-Ala peptide derivative. Continued electrophoresis results in the binding of Rist or Teic to the Fmoc-amino acid-d-Ala-d-Ala peptide derivatives. Analysis of the change in the relative migration time ratio (RMTR) or electrophoretic mobility () of the Fmoc-amino acid-d-Ala-d-Ala peptide derivatives relative to the non-interacting standards, as a function of the concentration of Rist and Teic, yields a value for K_b. These findings demonstrate the advantage of coupling on-column ligand synthesis to ACE for estimating binding parameters between antibiotics and ligands.Abbreviations Rist Ristocetin - Teic Teicoplanin - ACE Affinity capillary electrophoresis - RMTR Relative migration time ratio     

Determination of Hg(II) in Environmental Water Samples Using DLLME Method Prior to GC-FID

Mercury exists in two forms in environment, inorganic salts and organic compounds. Determination of mercury is very important, due to its health effects. In the present research, diphenylation of mercury using phenylboronic acid as a derivatization reagent was used for the determination of Hg(II) in real water samples. A simple, rapid and cheap method named dispersive liquid–liquid microextraction was used for the extraction of analyte under the following conditions: extraction solvent 16 μL of carbon tetrachloride, disperser solvent 1 mL of ethanol and sample volume 5 mL. Under the optimal conditions, the enrichment factor for diphenylmercury was 931 and the limit of detection calculated on the basis of five replicates was 0.004 μg mL^?1. The repeatability of the method expresses as relative standard deviation was 5.1 (n = 6). The linear range was between 0.01 and 10 μg mL^?1. The performance of the proposed technique was evaluated for the determination of mercury in different environmental water samples.     

Calculation of Density for Mixtures of Carbon Dioxide with Nitrogen and Methane from the ISM Equation of State

In this paper the analytical equation of state (EoS) proposed by Ihm‐Song‐Mason was applied to calculate molar volume of mixtures of carbon dioxide with nitrogen and methane. The pair interaction potential has been used to evaluate the second virial coefficients and the ISM EoS parameters (i.e. α and b). The calculated values of the aforesaid quantities were applied to predict the molar volumes for mixtures of carbon dioxide with nitrogen and methane. Agreement with experiment was excellent for both mixtures.     

Trimethylsilylation of Alcohols and Phenols,and Direct Acetylation of Silyl Ethers Catalyzed by Fe(ClO4)3.6H2O

In this article, a mild and efficient protocol for the trimethylsilylation of various aliphatic and benzylic alcohols and phenols with trimethylsilyl chloride using a catalytic amount of ferric perchlorate at room temperature and relatively short reaction times in good to excellent yields is reported. Direct acetylation of trimethylsilyl ethers catalyzed with Fe(ClO ₄ ) ₃ .6H ₂ O(0.02 mmol)/Fe(ClO ₄ ) ₃ SiO ₂ (0.2 g) using acetic anhydride at ambient temperature is also reported.     

New N-nicotinyl and N-isonicotinyl, N′,N″-diaryl phosphorictriamides with new Er(III) complex: synthesis, spectroscopic study and crystal structures

Ten new N-nicotinyl and N-isonicotinyl phosphoramidates with formula XP(O)R₂, X?=?Nicotinamide(nia), R?=?NHCH₂Ph (1), N(CH₃)CH₂Ph (2), NHCH(CH₃)Ph (3), NH-CH₂C₄H₃O (4), NHCH₂(C₅H₄N) (5), 3-NH-C₅H₄N (6), and YP(O)R₂, Y?=?isonicotinamide(iso), R?=?NHCH₂Ph (7), N(CH₃)CH₂Ph (8), NHCH(CH₃)Ph (9), NH-CH₂C₄H₃O (10) plus one new Er(III) complex with formula Er(L)₂(NO₃)₃ (11), L?=?(iso)PO(NHCH₂C₄H₃O)₂ (10), were synthesized and characterized by elemental analysis and ¹H, ¹³C, ³¹P NMR, IR, UV?Cvis spectroscopy. Crystal structures of compounds 10 and 11 were also determined by X-ray crystallography. Interestingly, the ¹H NMR spectra of compounds 1, 2, 6, 7, 9 indicated long-range ⁿ J _P,H (n?=?5,6,7) coupling constants, in the range of 1.4?C1.9?Hz, for the splitting of pyridine ring protons with phosphorus atom. IR results showed that the ??(C=O) values of compounds 7?C10 are greater than those of compounds 1?C5 which means that isonicotinyl moiety is more electron withdrawing than nicotinyl group. X-ray outcomes revealed that in complex 11 three phosphoric triamide ligands have been connected to each Er(III); one from N_pyridine and two from P=O donor sites. One of the P=O donor ligands is mono dentate while the other one acts as a bidentate ligand and coordinates to another Er atom via its N_pyridine site. By forming complex 11 the P=O and C?CN_amide bond lengths of ligand is increased in both, mono and bi dentate, ligands while the C=O bond length is decreased to lower values. These variations are in good agreement with IR results. All H-bonds and electrostatic interactions lead to form a three-dimensional polymeric cluster in the crystal lattice of 10 and 11.     

Effect of Copper Substitution and Preparation Methods on the LaMnO3 Structure and Catalysis of Methane Combustion and CO Oxidation

 LaMn1-xCuxO3刡冊 perovskite oxides (x = 0, 0.2, 0.4, 0.6, 0.8, 1) were prepared by two different methods, the Pechini and sol-gel methods. The catalysts were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray fluorescence spectroscopy, N2 adsorption, and temperature-programmed reduction. Their catalytic activity in the oxidation of methane and CO was evaluated. EDS and SEM results showed that the Pechini samples had more homogeneity and smaller particles (higher specific surface area). The catalytic activity for methane combustion was highest for x = 0.2. In CO oxidation, the oxides with x = 0.2 and x = 0.4 were the most active. The Pechini samples had higher activity and stability than the sol-gel samples.