Flow-through sensor based on derivative synchronous fluorescence spectrometry for the simultaneous determination of pyrene,benzo(e)pyrene and benzo(ghi)perylene in water

A flow-through/first derivative synchronous spectrofluorimetric sensor for the determination of PAH has been described. This sensor has been used for the simultaneous determination of PAH mixtures (pyrene, benzo(e)pyrene and benzo(ghi)perylene). Linear calibration ranges between 10 and 500 ng/ml with acceptable precision (repeatability, expressed as relative standard deviation, smaller than 4.6%, and sampling frequency of 12 h(-1)) have been obtained. The method has been applied to the determination of the target analytes in spiked water samples with excellent results (recoveries between 94 and 108%).     

Synthesis of cationic carbonyl complexes of manganese(I) with bidentate ligands

Summary Bidentate ligands can readily replace acetone in thefac-[Mn(CO)₃(chel)(OCMe₂)]⁺ complexes or the perchlorate group fromfac-[Mn(CO)₃(chel)(OClO₃)] yieldingfac-[Mn(CO)₃(chel)(L-L)]⁺ or [{fac-Mn(CO)₃(chel)}₂(L-L)]²⁺ [chel = 1,10-phenanthroline (phen), 2,2-bipyridine (bipy), 1,2-bis(diphenylphosphine)ethane (dpe); L-L = bis(diphenylphosphine)methane (dpm), dpe, 1,4-bis(diphenylphosphine)butane (dpb), succinonitrile (suc), and glutaronitrile (glu)]. Some of these mononuclear complexes are precursors for binuclear complexes which are linked by bridging phosphines or nitriles.     

Study of spectral analytical data using fingerprints and scaled similarity measurements

A new chemoinformatic model has been developed for enlarging the differences between spectra and applied to differentiation of wines according to the criteria grape origin and variety and ageing process. The model is based on generation of fingerprints from normalised spectra, using empirical parameters and a set of 120 samples. After generation of the fingerprints, similarity matrixes were built on the basis of the Tanimoto similarity index between the fingerprints of the samples. Calculation of the Tanimoto index was modified to adapt the index to the characteristics of the analytical measurements. Thus, scaling factors taking into account pattern fingerprints generated from a group of samples with common characteristics were used. In addition, a modified expression for calculating the Tanimoto index was employed. Principal-components analysis (PCA) and soft independent modelling of class analogy (SIMCA) were applied to the similarity matrixes. The results obtained are discussed as a function of the normalisation method employed, the empirical factor used in generation of the fingerprints, and selection of samples for building the pattern fingerprint, etc. Finally, results from differentiation of wines are compared with those obtained by applying PCA to the unprocessed spectra as stated by the proposed model.     

THE MECHANISM OF ENERGY TRANSFER FROM POLY-p-BENZOYLPHENYLACETIMIDO-BOVINE SERUM ALBUMIN TO SMALL-MOLECULE QUENCHERS

Abstract— Results of a quantitative photochemical study of poly- p -benzoylphenylacetimido-bovine serum albumin in the presence of small-molecule triplet quenchers are reported. The efficiency of quenching by organic salts containing low triplet energy chromophores is shown to be qualitatively dependent on their predicted association constants to the modified protein. In addition, quenching is inhibited by salts of organic acids which possess high binding affinities for the protein but do not contain chromophores of low triplet energy. Quantitative treatment of the quenching and inhibition data yields results which strongly support the operation of an 'affinity controlled' mechanism for triplet energy transfer from the benzophenone moieties of the modified-bovine serum albumin to quenchers such as α-naphthylacetate and trans -cinnamate.     

Effects of ultrasonic irradiation in flow-injection systems

The effects of ultrasonic irradiation on transport and reactions in several flow-injection manifolds are described. The influences of ultrasound on the physical dispersion of the injected plug is considered. Its effects on systems involving homogeneous (catalytic and non-catalytic) and heterogeneous (liquid/liquid extraction, precipitation) reactions are critically evaluated. In general, greater sensitivity is obtained, especially for heterogeneous systems, slow reactions and low analyte concentrations. Finally, practical considerations and potential uses of the combination of ultrasonic irradiation with flow-injection analysis are discussed.     

Flow injection determination of oxalate in urine based on an inhibitory effect

Summary Two methods based on the use of the normal and stopped-flow injection modes were developed for the determination of oxalate based on its inhibitory effect on the catalytic action of Fe(III) on the 2,4-diaminophenol/hydrogen peroxide system. The linear determination ranges achieved were between 0.2 and 12.0 g ml^–1 and between 0.2 and 40.0 g ml^–1, the precision was ±5.4%, and ±3.5%, and the sampling rate was 30 and 20 samples h^–1 for the normal and stopped-flow method, respectively. Both methods have been applied to the determination of oxalate in urine with excellent results.     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Energy decomposition in molecular complexes: implications for the treatment of polarization in molecular simulations

This study examines the contribution of electrostatic and polarization to the interaction energy in a variety of molecular complexes. The results obtained from the Kitaura-Morokuma (KM) energy decomposition analysis at the HF/6-31G(d) level indicate that, for intermolecular distances around the equilibrium geometries, the polarization energy can be determined as the addition of the polarization energies of interacting blocks, as the mixed polarization term is typically negligible. Comparison of KM and QM/MM results shows that the electrostatic energy determined in the KM method is underestimated (in absolute value) by QM/MM methods. The reason of such underestimation can be attributed to the simplified representation of treating the interaction between overlapping charge distribution by the interaction of a QM molecule with a set of point charges. Nevertheless, the polarization energies calculated by KM and QM/MM methods are in close agreement. Finally, a consistent, automated strategy to derive charge distributions that include implicitly polarization effects in pairwise, additive force fields is presented. The strategy relies in the simultaneous fitting of electrostatic and polarization energies computed by placing a suitable perturbing particle at selected points around the molecule. The suitability of these charges to describe molecular interactions is discussed.     

Individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wines by flow injection analysis

The individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wine by flow injection analysis is described. Individual determinations of 0.002–0.016% (v/v) ethanol or 1.0–8.0 μg ml^?1 acetaldehyde with r.s.d. 0.7% and 0.5%, respectively, are done with a single-beam spectrophotometer, based on the use of alcohol dehydrogenase and aldehyde dehydrogenase. A diode-array detector and dual reagent injections are used for the simultaneous determination of the two compounds. The errors are 〈 3.5% and 〈 2.0% for ethanol and acetaldehyde, respectively, when the method is applied to wine samples.