LC�CMS�CMS Method for the Analysis of New Non-Imidazole Histamine H3 Receptor Antagonist 1-[3-(4-tert-Butylphenoxy)propyl]piperidine in Rat Serum��Application to Pharmacokinetic Studies

A sensitive and specific liquid chromatography electrospray ionisation-tandem mass spectrometry method for determination of new non-imidazole histamine H(3) receptor antagonist 1-[3-(4-tert-butylphenoxy)propyl]piperidine (DL76) in rat serum has been developed and validated. Chromatography was performed on a XBridge? C18 analytical column (2.1?×?30?mm, 3.5?μm, Waters, Ireland) with gradient elution using a mobile phase containing acetonitrile and water with an addition of 0.1% of formic acid. Detection was achieved by an Applied Biosystems MDS Sciex (Concord, Ontario, Canada) API 2000 triple quadrupole mass spectrometer. Electrospray ionization (ESI) was used for ion production. The limit of detection in the SRM mode was found to be 0.5?ng?mL(-1). The limit of quantification was 1?ng?mL(-1). The precision and accuracy for both intra- and inter-day determination of DL76 ranged from 1.65 to 15.09% and from 88.74 to 113.43%. The results of this analytical method validation allow to carry out pharmacokinetic studies in rats. The method was used for the pilot study of the pharmacokinetic behavior of DL76 in rats after intravenous administration.     

Bio-dissolution of colloidal-size clay minerals entrapped in microporous silica gels

Four colloidal-size fractions of strongly anisotropic particles of nontronite (NAu-2) having different ratios of basal to edge surfaces were incubated in the presence of heterotrophic soil bacteria to evaluate how changes in mineral surface reactivity influence microbial dissolution rate of minerals. To avoid any particle aggregation, which could change the reactive surface area available for dissolution, NAu-2 particles were immobilized in a biocompatible TEOS-derived silica matrix. The resulting hybrid silica gels support bacterial growth with NAu-2 as the sole source of Fe and Mg. Upon incubation of the hybrid material with bacteria, between 0.3% and 7.5% of the total Fe included in the mineral lattice was released with a concomitant pH decrease. For a given pH value, the amount of released Fe varied between strains and was two to twelve-fold higher than under abiotic conditions. This indicates that complexing agents produced by bacteria play an important role in the dissolution process. However, in contrast with proton-promoted NAu-2 dissolution (abiotic incubations) that was negatively correlated with particle size, bacterial-enhanced dissolution was constant for all size fractions used. We conclude that bio-dissolution of nontronite particles under acidic conditions seems to be controlled by bacterial metabolism rather than by the surface reactivity of mineral.     

Molecular weight dependent charge carrier mobility in poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene)

Poly(3,3' '-dioctyl-2,2':5',2' '-terthiophene), a polymer recently used for the fabrication of organic field effect transistors, has been fractionated into five fractions distinctly differing in their molecular weights (Mn), with the goal of determining the influence of the degree of polymerization (DPn) on its principal physicochemical parameters. It has been demonstrated that within the Mn range studied (from 1.5 kDa to 10.5 kDa by SEC), corresponding to DPn from 10 to 38, the polymer band gap steadily decreases with growing molecular weight, which is clearly manifested by an increasing bathochromic shift of the band originating from the pi-pi* transition. The same trend is observed for the HOMO level, determined from the onset of the p-doping in cyclic voltammetry, which shifts from -5.10 eV to -4.90 eV for the lowest and the highest molecular weight fractions, respectively. The most pronounced influence of DPn has been found for the charge carriers' mobility-one of the most important parameters of field effect transistors (FETs) fabricated from this polymer. A fourfold increase in DPn results in an increase of the carriers' mobility by more than 3 orders of magnitude. Comparison of these results with those obtained for fractionated regioregular poly(3-hexylthiophene) shows a strikingly similar behavior of both polymers with respect to the molecular weight.     

Kansa-RBF algorithms for elliptic problems in regular polygonal domains

We propose matrix decomposition algorithms for the efficient solution of the linear systems arising from Kansa radial basis function discretizations of elliptic boundary value problems in regular polygonal domains. These algorithms exploit the symmetry of the domains of the problems under consideration which lead to coefficient matrices possessing block circulant structures. In particular, we consider the Poisson equation, the inhomogeneous biharmonic equation, and the inhomogeneous Cauchy-Navier equations of elasticity. Numerical examples demonstrating the applicability of the proposed algorithms are presented.     

Discrimination of carotenoid and flavonoid content in petals of pansy cultivars (Viola x wittrockiana) by FT‐Raman spectroscopy

Fourier Transform Raman spectroscopy (FT‐Raman) has been applied for the non‐destructive in‐situ analysis of pigments on differently colored flower petals of pansy cultivars (Viola x wittrockiana). The main target of the present study was to investigate how far the Raman mapping technique through FT‐Raman spectroscopy and cluster analysis of the Raman spectra is a potential method for the direct, in‐situ discrimination of flavonoids (flavonols against anthocyanins) and of carotenoids occurring in flowers, using intact and differently colored flower petal of Viola x wittrockiana for this case study. In order to get more information about the reliability of the direct in‐situ flavonoid detection by the Raman method, pigments extracts of the petals were separated by thin‐layer chromatography (TLC) and investigated by Raman spectroscopy. Hierarchical cluster analysis (HCA) of the Raman spectra from reference pigments (carotenoids, anthocyanins and flavonols), from areas of the flower petals, and from the TLC extracts allowed discriminating the various pigments, in particular flavonoids (flavonols against anthocyanins) and carotenoids. With a two‐dimensional Raman mapping technique, which provides a chemical image of the sample under investigation, we determined by cluster analysis the distribution of carotenoids, anthocyanins and flavonols from the outer layer of the petals, and by integrating through suitable spectral regions selected as characteristic markers for particular pigments their relative concentration could approximately be determined. We found a satisfactory correlation between the patterns seen on the visible images and the patterns on the chemical images obtained by Raman mapping. Copyright © 2011 John Wiley & Sons, Ltd.     

A catalytic adsorptive stripping voltammetric procedure for trace determination of Cr(VI) in natural samples containing high concentrations of humic substances

A simple and fast catalytic adsorptive stripping voltammetric procedure for trace determination of Cr(VI) in natural samples containing high concentrations of humic substances has been developed. The procedure for chromium determination in the presence of DTPA and nitrates was employed as the initial method. In order to enhance the selectivity vs. Cr(III) the measurements were performed at 40°C. Interference from dissolved organic matter such as humic and fulvic acids was drastically decreased by adding Amberlite XAD-7 resin to the voltammetric cell before the deaeration step. The whole procedure was applied to a single cell, which allowed monitoring of the voltammetric scan. Optimum conditions for removing humic and fulvic acids due to their adsorption on XAD-7 resin were evaluated. The use of XAD-7 resin also minimize interferences from various cationic, anionic, and nonionic surfactants. The calibration graph for Cr(VI) for an accumulation time of 30 s was linear in the range 5 × 10⁻¹⁰ to 5 × 10⁻⁸ mol L⁻¹. The relative standard deviation for determination of Cr(VI) at a concentration of 1 × 10⁻⁸ mol L⁻¹ was 3.5% (n = 5). The detection limit estimated from 3 times the standard deviation for low Cr(VI) concentrations and an accumulation time of 30 s was about 1.3 × 10⁻¹⁰ mol L⁻¹. The proposed method was successfully applied to Cr(VI) determination at trace levels in soil samples.     

Ligand binding properties of cobalamins

The main goal of the present density functional theory calculations is a comparative study of NO, O₂, ${{\rm NO}_{2}^{-}}$ , and H₂O binding to different forms of cob(II)alamins and cob(III)alamins. The comparison of binding energies of small ligands enables one to draw conclusions regarding the stability of the studied derivatives of cobalamins as well as to define the preferred form of cobalamin for each ligand. Ligands such as NO and O₂ favor cob(II)alamins, while H₂O and ${{\rm NO}_{2}^{-}}$ cob(III)alamins. The obtained results are confronted with available experimental data. Finally, our findings allow one to divide the studied small ligands into two groups: NO and O₂ for which the coordination to cobalamins significantly weakens their internal bonds, and ${{\rm NO}_{2}^{-}}$ and H₂O for which the effect is not observed.     

Ion flux through membrane channels--an enhanced algorithm for the Poisson-Nernst-Planck model

A novel algorithmic scheme for numerical solution of the 3D Poisson-Nernst-Planck model is proposed. The algorithmic improvements are universal and independent of the detailed physical model. They include three major steps: an adjustable gradient-based step value, an adjustable relaxation coefficient, and an optimized segmentation of the modeled space. The enhanced algorithm significantly accelerates the speed of computation and reduces the computational demands. The theoretical model was tested on a regular artificial channel and validated on a real protein channel-alpha-hemolysin, proving its efficiency.