Surface Modification of Poly-ε-Caprolactone with an Atmospheric Pressure Plasma Jet

In this work, poly-ε-caprolactone samples are modified by an atmospheric pressure plasma jet in pure argon and argon/water vapour mixtures. In a first part of the paper, the chemical species present in the plasma jet are identified by optical emission spectroscopy and it was found that plasmas generated in argon/0.05 % water vapour mixtures show the highest emission intensity of OH (A–X) at 308 nm. In a subsequent section, plasma jet surface treatments in argon and argon/water vapour mixtures have been investigated using contact angle measurements and X-ray photoelectron spectroscopy. The polymer samples modified with the plasma jet show a significant decrease in water contact angle due to the incorporation of oxygen-containing groups, such as C–O, C=O and O–C=O. The most efficient oxygen inclusion was however found when 0.05 % of water vapour is added to the argon feeding gas, which correlates with the highest intensity of OH (X) radicals. By optimizing the OH (X) radical yield in the plasma jet, the highest polymer modification efficiency can thus be obtained.     

The relationship between nanosilica dispersion degree and the tensile properties of polyurethane nanocomposites

The tensile properties and structure of silica-based polyurethane (PU) nanocomposites were parametrically studied as a function of silica type and weight concentration, polyol OH number, and mixing methods. The variation of the silica functionalization groups (from silanols to silazanes) had a relevant effect on dispersion. An elevated interparticle distance of the silica agglomerates improved substantially the tensile strength (from 44.3 to 82.8 MPa) and strain to failure (from 3.0 to 7.95) while maintaining elastic modulus (from 2.08 to 2.31 GPa) with respect to the neat PU matrix. Polyol’s with different OH numbers have shown to dramatically modify the silica dispersion degree by the modification of the stability of the colloidal dispersion. An increase of its value deteriorated dispersion and the tensile properties of the nanocomposites. The effect of three dispersion methods (ultrasonic dispersion, high shear mixing, and tip sonication) has shown to have a relative effect on the reduction of agglomerate size and the interparticle distance. High power sonication methods were more effective in reducing agglomerate size in contrast to shear methods. Classical theories of colloidal dispersion (Derjaguin, Landau, Verwey, and Overbeek) have been able to explain the correlation between the silica aggregation state and the final tensile properties of the nanocomposite.     

The Use of Various Chromatographic Techniques for the Determination of Phenylurea Herbicides and Their Corresponding Anilines in Environmental Samples,II. Applications

Abstract

In earlier work, various strategies have been developed for the trace-level determination of phenylurea herbicides and the anilines which are their main degradation products. They include catalytic hydrolysis of the phenylureas on silica, liquid chromatographic fractionation of complex mixtures of herbicides and anilines, derivatization of anilines and herbicides with electron-capture-sensitive reagents, and final analysis by means of capillary gas chromatography. In the present paper, the application of these principles to trace-level analysis of surface water, soil and crop samples is demonstrated.     

Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Antarctic Environmental Specimen Bank-First 5 Years of Experience

Abstract

The Project on an Antarctic Environmental Specimen Bank (Banca Campioni Ambientali Antartici—BCAA) began in 1994 in order to collect and classify samples from the Antarctic ecosystem to be used for future studies.

The objectives of the project are similar to the general aims of the Environmental Specimen Banks, but they specifically focus on the chemical aspects concerning the research activities of the Italian Project on the “Micropollutants Chemistry” (Sector “Chemical Contamination” of the Italian Antarctic Research Programme—PNRA).

During these first years the facilities suitable for storing a significant number of specimens (now over 2,000) at different temperatures (from ?30°C to ?150°C) and a database system, specifically designed for managing and consulting information concerning both the storage of samples and data on their chemical characterisation, have been developed.

In addition, a programme for validating the procedures of Antarctic organisms storage by checking the stability of some chemical parameters both in fresh and freeze-dried specimens has been developed.     

Volatile organic compounds in an urban environment: a comparison among Belgium,Vietnam and Ethiopia

The effects of urban and indoor air pollution on human health are a major environmental concern for all, but not much has been researched in the developing world. Specifically, quantitative data on the occurrence of volatile organic compounds (VOCs) – main contributors to air pollution – in Asia and Africa are scarce compared to the availability of data in the developed world. This paper presents one of the first studies focusing on the analysis and occurrence of VOCs in Vietnam and Ethiopia, which constitutes part of the novelty of this work. A spectrum of 34 VOCs was measured at eight different urban sites in Ghent (Belgium), Hanoi (Vietnam), Jimma and Addis Ababa (Ethiopia) during three sampling campaigns from September 2008 to September 2010. Sampling was done in an active way by means of sorbent tubes filled with Tenax TA. The analysis was done by TD-GC-MS using internal standard calibration. Data were interpreted and compared in terms of (i) individual, subgroup and total VOCs concentration (TVOCs), (ii) indoor-to-outdoor (I/O) concentration ratios, (iii) source identification by diagnostic ratio and/or correlation coefficients, and (iv) ozone formation potential (OFP) at outdoor sites based on up-to-date maximum incremental reactivity (MIR). I/O concentration ratios varied between 0.2 and 30, with big differences noticed with respect to the type of VOC(s) considered and the type of outdoor sampling location. The highest TVOC concentrations were measured in street samples with maximum values of 54?µg/m³ in Ghent, 507?µg/m³ in Hanoi and 318?µg/m³ in Addis Ababa illustrating the large difference in ambient air quality levels. This is also reflected in the arithmetic mean OFP values (µg/m³) of 82, 1308 and 596 in Ghent, Hanoi and Addis Ababa, respectively. Results of this study could be helpful to support formulation of national policy with regard to ambient air quality.     

Interactions between cyclodextrins and fluorescent T-2 and HT-2 toxin derivatives: a physico-chemical study

T-2 and HT-2 toxins are mycotoxins produced by several Fusarium species that are commonly found in various cereal grains, including oats, barley, wheat and maize. Intake estimates indicate that the presence of these mycotoxins in the diet can be of concern for public health. In this work, the inclusion processes occurring between fluorescent anthracene-derivatives of T-2 and HT-2 toxins and different cyclodextrin (CD) molecules were investigated in aqueous solutions by means of UV–Vis absorption, fluorescence emission and dynamic light scattering. Binding constant values and chemico-physical parameters were calculated. It was found that β-CDs give stronger inclusion reactions with both T-2 and HT-2 derivatives, as stated by important emission intensity increments. Such interactions were found to be fundamentally enthalpy-driven. Among β-CDs, the effect of the methylation at hydroxyl groups was tested: as a result, the di-methyl form of β-CD was found to induce the best fluorescence intensity enhancements.     

Derivatives of 3-Deoxy-3-(N-Hydroxyamino)-D-Ribose

Abstract

A series of 3-(N-arylmethyl-N-hydroxyamino)-l,2-O-cyclopentylidene-3-deoxy-5-O-toluoyl-α-D-riboses has been prepared. The blocking groups used were chosen to allow an easy nucleosidation of these compounds to spin labelled analogs of natural nucleosides. The conformational behavior of the N-arylmethyl-N-hydroxyamino group has been studied using ³/_CH NMR coupling data and molecular mechanics computations. Upon spontaneous oxidation, these hydroxylamines led to the corresponding aminoxyl free radicals which were submitted to EPR spectroscopy and quantum mechanical computations at a semiempirical level (PM3).     

Easy Chemo-Enzymatic Synthesis of Human Milk Trisaccharides from a Common Selectively Protected Lactose Building Block

ABSTRACT

Three glycosyllactosides, contained in the neutral fraction of human milk oligosaccharides, were synthesised in a simple and straightforward manner through a sequence based on a chemo-enzymatic approach. Lipase catalysed regioselective 6'-O-acylation of benzyl β-lactoside, followed by the introduction of an isopropylidene group and acetylation afforded, depending on the reaction conditions, compounds 4a and 4b, which allow selective access to positions 3, 3' and 6'. Glycosylation with proper donors gave trisaccharides 6, 9 and 12.     

A New Procedure for Highly Regio‐ and Stereoselective Iodoacetoxylation of Protected Glycals and α‐1,2‐Cyclopropanated Sugars

Protected glycals and α‐1,2‐cyclopropanated sugars were converted in high yields and selectivities in less than 2 h at low temperatures to 2‐deoxy‐2‐iodoglycosyl acetates or novel 2‐deoxy‐2‐iodomethylglycosyl acetates using the simple, inexpensive reagent mixture of ammonium iodide, hydrogen peroxide, and acetic anhydride/acetic acid in acetonitrile. The protected glycals gave rise to 2‐deoxy‐2‐bromoglycosyl acetates when ammonium bromide was used instead of the iodide, although longer reaction times were required and selectivities were inferior. Other simple olefins such as styrene and indene were also converted to their corresponding 1,2‐trans‐iodoacetates.