Axial Imidazole Distortion Effects on the Catalytic and Binding Properties of Chelated Deuterohemin Complexes

The effect of strain in the axial coordination of imidazole to the heme has been studied in the chelate complexes deuterohemin-histidine (DH-His) and deuterohemin-alanylhistidine (DH-AlaHis). Molecular mechanics calculations indicate that three types of distortion of the axial ligand occur in DH-His, due to the relatively short length of the arm carrying the donor group: tilting off-axis, tipping, and inclination of the imidazole plane with respect to the axial Fe-N bond. The effects of tilting (Deltagamma approximately 10 degrees ) and inclination of the imidazole ring (Deltadelta approximately 17 degrees ) are dominant, while tipping is small and is probably of little importance here. By contrast, the axial imidazole coordination is normal in DH-AlaHis and other computed deuterohemin-dipeptide or -tripeptide complexes where histidine is the terminal residue, the only exception being DH-ProHis, where the rigidity of the proline ring reduces the flexibility of the chelating arm. The distortion in the axial iron-imidazole bond in DH-His has profound and negative influence on the binding and catalytic properties of this complex compared to DH-AlaHis. The former complex binds more weakly carbon monoxide, in its reduced form, and imidazole, in its oxidized form, than the latter. The catalytic efficiency in peroxidative oxidations is also reduced in DH-His with respect to DH-AlaHis. The activity of the latter complex is similar to that of microperoxidase-11, the peptide fragment incorporating the heme that results from hydrolytic cleavage of cytochrome c.     

Photochemistry of Dihydrido(hydrotris(3,5-dimethylpyrazolyl)borato)(Z-cyclooctene)iridium. Synthetic Intermediates and Mechanism of the Photochemical Formation of Hydridophenyl(hydrotris(3,5-dimethylpyrazolyl)borato)(trimethyl phosphite)iridium

The photolysis of a benzene solution of [Tp(Me2)IrH(2)(COE)], 1 (Tp(Me2) = hydrotris(3,5-dimethylpyrazolyl)borate, COE = Z-cyclooctene), in the presence of P(OMe)(3), gives the stable novel complex [Tp(Me2)IrH(C(6)H(5))(P(OMe)(3))], 3a. The photochemical syntheses of [Tp(Me2)IrH(2)(P(OMe)(3))], from 1 and P(OMe)(3) in diethyl ether, and [Tp(Me2)IrH(2)(CH(2)=CHCOO(t)Bu)], from 1 in tert-butyl acrylate, are also reported. The above reactions and several experiments using C(6)D(6) and P(OCD(3))(3) show that, in all cases, the primary photoproduct is the 16-electron, five-coordinate iridium(III) intermediate {Tp(Me2)IrH(2)}, 6a, produced by loss of COE from 1. The above experiments also allow the postulation of a mechanistic pathway for the formation of 3a which involves the oxidative addition of an aromatic C-H bond by 6a. Furthemore, the photochemical reaction of 1 in the presence of P(OCD(3))(3) shows that, under the reaction conditions used, oxidative addition of C-H bonds of P(OMe)(3) and of coordinated Tp(Me2)-ligands, presumably, to the intermediates 6a and {Tp(Me2)IrH(C(6)H(5))}, also occurs. Thus, coordinatively unsaturated iridium(III) species readily activate C-H bonds.     

Dramatic 5'-residue effect on conformer distribution of short oligonucleotide retro models of the cisplatin-DNA cross-link: implications for the Lippard and cross-link distorted base pair steps present in cisplatin-DNA duplex adducts

The cisplatin anticancer drug preferentially attacks the GG sequence of DNA duplexes. Virtually all DNAs containing the key G*G* lesion (G* = N7 platinated G) have large distortions in the cross-link (G*G*) base pair (bp) step and also in the adjacent Lippard (XG*) bp step, making the adducts very different from B-form DNA in the XG*G* region. The XG*G* strand in duplexes also differs in several ways from single-strand (ss) models with G*G* and XG*G* sequences. In the duplex, the X residue has an N sugar, the 5'-G* and 3'-G* bases have slight "R" canting (3'-G* H8 atom toward the 5'-G* base), and there is no or weak H-bonding by the NH3 ligands. In most XG*G* ss models, X has an S sugar, the 5'-G* base normally cants strongly toward the 3'-G* base (L canting), and the NH3 forms an H-bond. Well-defined ss models exist in the solid state, but dynamic motion obscures the properties of the ss models in solution. In this work, we employ retro models (better defined, less dynamic ss models) to understand the differences between duplex and ss models. The retro models in this study lack carrier ligand NH's, thus eliminating H-bonding. To correlate previous ss solid-state models with our solution work, we constructed hybrid molecules by overlaying parts of known structures. The combined model and experimental information indicates that the X N-pucker is not favorable in L-canted ss models, that X residue steric effects (not H-bonding) favor L canting in ss models, that X N-pucker is needed for favorable WC hydrogen bonding and stacking interactions in duplexes, and that X N-pucker minimizes X base clashes with bases in the complementary strand in duplexes. The R canting minimizing clashes between the X and G* residues of the Lippard bp step (independent of X pucker) and the repositioning of the X residue base caused by the change from S-pucker to N-pucker together lead to the unusual features of the Lippard bp step in the duplex.     

Synthesis and Characterization of Rhenium(V) Oxo Complexes with a New Thiol-Amide-Thiourea Ligand System. X-ray Crystal Structure of [1-Phenyl-3-[2-((2-thioacetyl)amino)ethyl]thioureato]oxorhenium(V)

General methods for preparing Re(V)O complexes with a novel series of thiol-amide-thiourea (TATU) ligands, a new class of N(2)S(2) chelates, were developed. The TATU ligands, the first multidentate systems designed with a bidentate thiourea moiety, have been used to prepare the first high-valent transition metal complexes with bidentate thiourea coordination. Direct reaction of N-(2-aminoethyl)-2-((triphenylmethyl)thio)acetamide (1) with phenyl, 4-methoxyphenyl, 4-chlorophenyl, and methyl isothiocyanate afforded ready access to the corresponding S-protected TATU ligands in one step. A two-step preparation of the N,N-dimethylthiourea TATU ligand derived from 1 was also developed. Deprotection of thiols in trifluoroacetic acid with triethylsilane followed by a ligand exchange reaction with Re(V)O precursors yielded neutral ReO(TATU) complexes. The structure of [1-phenyl-3-[2-((2-thioacetyl)amino)ethyl]thioureato]oxorhenium(V) (6a) was determined by X-ray diffraction methods. Crystal data for 6a: C(11)H(12)N(3)O(2)ReS(2), fw 468.6, orthorhombic, Pca2(1); a = 22.605(5) ?, b = 13.029(3) ?, c= 9.698(2) ?; V = 2856.3(11) ?(3); Z = 8. The coordination environment of 6a was pseudo-square-pyramidal with a deprotonated thiol S, deprotonated amide N, deprotonated thiourea N, and thiocarbonyl S coordinated in the basal plane and the oxo ligand in the apical position. The thiourea function forms a four-membered chelate ring in the multidentate TATU ligands. The two N-C and the S-C bond distances within the monodeprotonated thiourea moiety were typical of bonds with multiple-bond character. Solution (1)H NMR data for all five complexes were consistent with the solid-state structure of 6a. A broad singlet attributable to the uncoordinated NH group of thiourea was observed for the monosubstituted thiourea complexes but was not present for the N,N-dimethylthiourea derivative. Instead, two singlets of equal intensity were observed for the two methyl groups, indicating that there is restricted rotation around the C-N(CH(3))(2) bond and an extended pi system in the thiourea moiety. The four-membered ring might cause difficulty because the M-S distance would be relatively long in an undistorted ligand. This may be the reason such chelate ligands have not been previously investigated. However, the N-C-S angle narrows to approximately 105 degrees, permitting a Re-S bond with a typical bond length to be formed. We conclude that such a ring represents a versatile new building block to create multidentate ligands.     

Synthesis of some 3,7-disubstituted quino[3,2-c][1,8]naphthyridines

The preparation of some 3,7-disubstituted-5,6-dihydroquino[3,2-c][1,8]naphthyridines ( 6 ) by the condensation of 7-substituted-2,3-dihydro-1,8-naphthyridin-4-(1H)ones ( 5 ) with o-aminoacetophenone or o-aminobenzophenone is described. All the 5,6-dihydroderivatives 6 were transformed into the fully aromatic compounds 7 by heating with nitrobenzene. Only a few quino[3,2-c][1,8]naphthyridines were previously described.     

Comprehensive two-dimensional chromatography in food analysis

Comprehensive two-dimensional (2D) chromatographic techniques can be considered innovative methods, only quite recently developed. Since their introduction to the chromatographic community, these techniques have been used in several fields and have gained an excellent reputation as valuable and powerful analytical tools. The revolutionary aspect of comprehensive multidimensional (MD) techniques, in respect to classical MD chromatography, is that the entire sample is subjected to the 2D advantage. The resulting unprecedented separating capacity makes these approaches prime choices when analysts are challenged with highly complex mixtures. Furthermore, in the case of automated systems, instrumental analysis times are roughly the same as in monodimensional applications. The present review reports various comprehensive chromatographic applications on different food matrices. The GC x GC section highlights two fundamental aspects for component separation/identification: the exceptional peak capacity and the formation of group types on the 2D space plane. The LC x LC section reports the employment in food analysis of a recently developed multidimensional normal-phase (NP)-reversed-phase (RP) high performance liquid chromatography (HPLC) system. Also reported are comprehensive LC x GC and packed column supercritical fluid chromatography (pSFC x pSFC) applications in this field.     

Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

Water concentration profiles in membranes measured by ESEEM of spin-labeled lipids

Electron spin-echo envelope modulation (ESEEM) spectroscopy of phospholipids spin-labeled systematically down the sn-2 chain was used to detect the penetration of water (D2O) into bilayer membranes of dipalmitoyl phosphatidylcholine with and without 50 mol % cholesterol. Three-pulse stimulated echoes allow the resolution of two superimposed 2H-ESEEM spectral components of different widths, for spin labels located in the upper part of the lipid chains. Quantum chemical calculations (DFT) and ESEEM simulations assign the broad spectral component to one or two D2O molecules that are directly hydrogen bonded to the N-O group of the spin label. Classical ESEEM simulations establish that the narrow spectral component arises from nonbonded water (D2O) molecules that are free in the hydrocarbon chain region of the bilayer membrane. The amplitudes of the broad 2H-ESEEM spectral component correlate directly with those of the narrow component for spin labels at different positions down the lipid chain, reflecting the local H-bonding equilibria. The D2O-ESEEM amplitudes decrease with position down the chain toward the bilayer center, displaying a sigmoidal dependence on position that is characteristic of transmembrane polarity profiles established by other less direct spin-labeling methods. The midpoint of the sigmoidal profile is shifted toward the membrane center for membranes without cholesterol, relative to those with cholesterol, and the D2O-ESEEM amplitude in the outer regions of the chain is greater in the presence of cholesterol than in its absence. For both membrane types, the D2O amplitude is almost vanishingly small at the bilayer center. The water-penetration profiles reverse correlate with the lipid-chain packing density, as reflected by 1H-ESEEM intensities from protons of the membrane matrix. An analysis of the H-bonding equilibria provides essential information on the binding of water molecules to H-bond acceptors within the hydrophobic interior of membranes. For membranes containing cholesterol, approximately 40% of the nitroxides in the region adjacent to the lipid headgroups are H bonded to water, of which ca. 15% are doubly H bonded. Corresponding H-bonded populations in membranes without cholesterol are ca. 20%, of which ca. 6% are doubly bonded.     

Isotope dilution determination of polycyclic aromatic hydrocarbons in olive pomace oil by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometry detection (MS) for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in olive pomace oil has been developed. The oil was diluted with n-pentane and extracted by liquid-liquid partition with dimethyl sulphoxide (DMSO). After water addition and back-extraction with cyclohexane, a thin-layer chromatography on silica gel was performed as a further purification step. The PAHs spot was scraped off from the plate and the final extract was concentrated and analysed by GC-MS in full scan mode. The eight PAHs under investigation were determined in the presence of the corresponding labelled compounds added as internal standards to the sample at the beginning of the analytical process. The identified PAHs were then quantified by the isotope dilution methodology assuring the compensation of the concentration of each analyte for any variation in the sample preparation. The method precision was satisfactory with relative standard deviation (R.S.D.) values in the range 3.6-12.7% for all PAHs. The average recovery rates ranged from 69.0 to 97.5%. Accuracy was also calculated for benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene by analysing a certified reference material (CRM 458, coconut oil) with adequate results. All response curves exhibited a linear fit from 0.1 to 10 microg ml(-1) and the determination coefficients R2 were better than 0.9942. The limits of detection (0.1-0.4 microg kg(-1)) were acceptable when compared with the maximum permitted limit of 2 microg kg(-1) for each of the eight considered PAHs and 5 microg kg(-1) for the sum of the eight PAHs established by the Italian legislation. Measurement uncertainty was finally calculated identifying and quantifying the uncertainty components of the analytical process. The relative expanded uncertainties (Uc), expressed as percent values were in the range 8.5-11.4% thus appropriate for residues quantification in the range of concentrations considered in the present study.     

Novel selenium-containing non-natural diamino acids

The general synthesis of a new class of non-natural diamino acids, 2-amino-3-[(2′-aminoalkyl)seleno]propanoic acids, or Se-(aminoalkyl)selenocysteines, is reported. Under the conditions devised, enantiopure N-Boc-protected β-l-iodoamines, which are readily generated from proteinogenic α-amino acids, were treated with the selenolate anion obtained from NaBH₄ splitting of the Se-Se bond in commercial l-selenocystine. The Se-alkylation products were enantiomerically pure and the reaction is high yielding (92-98%), without any detectable traces of accompanying by-products.