Comparison of mono- and polyatomic primary ions for the characterization of organic dye overlayers with static secondary ion mass spectrometry

Organic carbocyanine dye coatings have been analyzed by time-of-flight static secondary ion mass spectrometry (TOF-S-SIMS) using three types of primary ions: Ga(+) operating at 25 keV, and Xe(+) and SF(5) (+) both operating at 9 keV. Secondary ion yields obtained with these three primary ions have been compared for coatings with different layer thickness, varying from (sub)-monolayer to multilayers, on different substrates (Si, Ag and AgBr cubic microcrystals). For (sub)-monolayers deposited on Ag, Xe(+) and SF(5) (+) primary ions generate similar precursor ion intensities, but with Ga(+) slightly lower precursor ion intensities were obtained. Thick coatings on Ag as well as mono- and multilayers on Si produce the highest precursor and fragment ion intensities with the polyatomic primary ion. The yield difference between SF(5) (+) and Xe(+) can reach a factor of 6. In comparison with Ga(+), yield enhancements by up to a factor of 180 are observed with SF(5) (+). For the mass spectrometric analysis of dye layers on AgBr microcrystals, SF(5) (+) again proves to be the primary ion of choice.     

Base Hydrolysis of Pentaaminecobalt (III) Complexes: The [CoX(dien) (dapo)]n+ system. Part 3. The internal conjugate base mechanism

Azide anation and racemization of optically pure mer-exo(H)- and mer-endo(H)-[Co(OH)(dien)(dapo)]²⁺ ( A and B (X = OH), resp.; dien = N-(2-aminoethyl)ethane-1,2-diamine; dapo = 1,3-diaminopropan-2-ol) involve the same symmetrical pentacoordinate intermediate as the base hydrolyses of the corresponding mer-exo(H)- and mer-endo(H)-[CoX(dien)(dapo)]²⁺ species A and B , respectively, where X = Cl, Br, or N₃. The kinetic parameters of the anation process are fully compatible with the independently measured competition ratio. The rate data reveal that substitution of OH^? is unexpectedly fast, viz. it is not consistent with the usual sequence Br^? > Cl^? > H₂O > N > OH^?. This behavior is interpreted on the basis of an internal conjugate base mechanism which involves an amino-hydroxo/aminato-aqua tautomerism, viz. the reaction is actually an OH^? -catalyzed substitution of [CoH₂O(dien)(dapo)]³⁺ where deprotonation occurs effectively at the secondary-amine site NH of dien.     

Influence of peak measurement parameters on the quality of chiral electrophoretic separations

The effect of nine peak measurement/analysis parameters on chiral capillary electrophoresis (CE), followed by UV detection, was studied. The parameters pertained UV-detection (detection wavelength, reference wavelength, and wavelength bandwidths), signal processing (data acquisition rate, type and amount of filtering) and peak detection (detection threshold and peak width). The influence of these factors on the chiral separation of dimethindene enantiomers was studied at two different concentrations (i.e., at high and low signal-to-noise (S/N) ratio) by the means of experimental designs. The electropherogram characteristics considered were the resolution between the two enantiomers, the peak areas, and the S/N ratio. A D-optimal design was first used as screening design to identify the most critical parameters. Afterwards, a modelling of the different responses as a function of these critical parameters was performed based on the results of a face-centered central composite design. The results showed that the signal-processing parameters should be carefully selected when developing a CE separation since very important variations in the separation, the S/N ratio and the peak area of the substances can occur by setting these parameters at different levels. The detection wavelength should also be carefully chosen for optimal peak area measurement. The role of these parameters becomes more important with decreasing concentration of the analytes (i.e., low S/N ratio). This study showed that the peak measurement/analysis parameters should be optimized as the chemical and physical parameters of a method. They also should always be well specified in order to allow a good transfer of a method from one instrument to another.     

Evaluation of an accurate calibration and spectral standardization procedure for Raman spectroscopy

Due to modern developments Raman spectroscopy has evolved into a fast vibrational technique. Detailed fingerprints in combination with non-destructivity and minimal sample preparation has allowed the construction of reference libraries in a variety of research fields. Long-term stability and comparability are important characteristics when developing reference libraries. In addition, small shifts in highly similar spectra of different samples may limit the full potential of Raman spectroscopy. Since libraries often contain a large number of different and/or highly similar spectra, it is important that each data point in all the spectra corresponds to the exact Raman wavenumber. This is often not the case, due to shifts in optical pathway and/or shifts in laser wavelength. This paper describes a complete calibration protocol (wavelength and intensity) and evaluates the procedure for both short and long term stability, by means of 60 randomly selected measurement sessions spread over a period of nine months. A two-step standardization procedure is proposed to deal with spectral shifts.     

Electrothermal vaporisation ICP-mass spectrometry (ETV-ICP-MS) for the determination and speciation of trace elements in solid samples - A review of real-life applications from the author's lab

The use of electrothermal vaporisation (ETV) from a graphite furnace as a means of sample introduction in inductively coupled plasma mass spectrometry (ICP-MS) permits the direct analysis of solid samples. A multi-step furnace temperature programme is used to separate the vaporisation of the target element(s) and of the matrix components from one another. Sometimes, a chemical modifier is used to enable a higher thermal pre-treatment temperature, by avoiding premature analyte losses (stabilisation) or promoting the selective volatilisation of matrix components. In almost all instances, accurate results can be obtained via external calibration or single standard addition using an aqueous standard solution. Absolute limits of detection are typically ~1 pg, which corresponds to 1 ng/g for a typical sample mass of 1 mg. Real-life applications carried out in the author's lab are used to illustrate the utility of this approach. These applications aim at trace element determination in industrial and environmental materials. The industrial materials analysed include different types of plastics - Carilon, polyethylene, poly(ethyleneterephtalate) and polyamide - and photo- and thermographic materials. As samples from environmental origin, plant material, animal tissue and sediments were investigated. Some applications aimed at a multi-element determination, while in other, the content of a single, but often challenging, element (e.g., Si or S) had to be measured. ETV-ICP-MS was also used in elemental speciation studies. Separation of Se-containing proteins was accomplished using polyacrylamide gel electrophoresis (PAGE). Subsequent quantification of the Se content in the protein spots was carried out using ETV-ICP-MS. As the volatilisation of methylmercury and inorganic mercury could be separated from one another with respect to time, no chromatographic or electrophoretic separation procedure was required, but ETV-ICP-MS as such sufficed for Hg speciation in fish tissue.     

Totally real submanifolds in satisfying Chen's equality

In this paper, we study 3-dimensional totally real submanifolds of . If this submanifold is contained in some 5-dimensional totally geodesic , then we classify such submanifolds in terms of complex curves in lifted via the Hopf fibration . We also show that such submanifolds always satisfy Chen's equality, i.e. , where for every . Then we consider 3-dimensional totally real submanifolds which are linearly full in and which satisfy Chen's equality. We classify such submanifolds as tubes of radius in the direction of the second normal space over an almost complex curve in .

     

On a bosonic-parafermionic realization ofU_q (\widehat{sl(2)})

We realize the current algebra at an arbitrary level in terms of one deformed free bosonic field and a pair of deformed parafermionic fields. It is shown that the operator product expansions of these parafermionic fields involve an infinite number of simple poles and simple zeros, which then condensate to form a branch cut in the classical limitq1. Our realization coincides with those of Frenkel-Jing and Bernard when the levelk takes the values 1 and 2, respectively.     

Synthesis, Conformational Studies, X-ray Structures, and Complexation Properties of Semirigid Macrocyclic Phosphonamides

The semirigid phosphonamide ligands 1-5 have been synthesized from the macrocyclic precursors 6-9 by reaction with 1,3-propanediol ditosylate or 1,2-dichloroethane. For the thiophosphoryl compounds 1 and 2, and the phosphoryl derivative 5, the reactions were carried out in biphasic aqueous NaOH solutions. The phosphoryl derivatives 3 and 4 were better obtained from NaH in anhydrous tetrahydrofuran. The conformations of the hosts in solution were deduced from low-temperature NMR and NOE difference experiments. Conformational equilibria between exo and endo forms are observed for the 18-membered macrocycles 1 and 3. The exo conformer predominates in solution for the 21-membered macrocycle 2, whereas 4 exists as rapidly exchanging conformers. The X-ray crystal structures of macrocycles 1, 2, and 5 have been determined as well as the complexes 1.Hg(SCN)(2) and 5.LiNO(3). In the Hg(2+) complex the metal ion is located out of the macrocyclic cavity and is coordinated to the thiophosphoryl unit. In 5.LiNO(3)()()the Li(+) cation is located inside the macrocyclic cavity and is coordinated to a tetrahedral array of oxygen donors. Free energies of complexation (DeltaG degrees ) of the phosphorylated ligands 3-5 with alkali metal and ammonium cations were determined in CHCl(3) saturated with H(2)O by picrate extraction experiments. The -DeltaG degrees values are greatest for 4 complexing K(+) and NH(4)(+) (7.3 and 8.0 kcal/mol, respectively). The relationships between structure and binding are discussed.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Structural evolution of hexa-peri-hexabenzocoronene adlayers in heteroepitaxy on n-pentacontane template monolayers

The growth and structure of self-assembled adlayers of hexakis(n-dodecyl)-peri-hexabenzocoronene (HBC-C12) adsorbed on highly ordered pyrolitic graphite (HOPG) decorated by an n-pentacontane (n-C50H102) monolayer have been investigated by scanning tunneling microscopy (STM). Whereas on HOPG the HBC-C12 molecules readily self-assemble into a unique stable 2D structure, on the [n-C50H102 monolayer/graphite] system we observe morphological phase transitions with formation of time dependent alpha, beta, and gamma phases (alpha-->beta-->gamma). The initial alpha-phase is similar to that obtained on bare graphite, while intermediate beta- and final gamma-structures present molecular dimers and rows, respectively. The observed two-dimensional polymorphism is due to weak interaction between HBC-C12 molecules and n-C50H102-modified graphite substrate. Our results constitute an important step toward the control of the growth and structure of highly ordered monolayers of functional conjugated molecules by modifying the graphite surface with an n-alkane monolayer of appropriate chain length.