Weak intramolecular proton-hydride and proton-fluoride interactions: experimental (NMR, X-ray) and DFT studies of the bis(NBH(3)) and bis(NBF(3)) adducts of 1,3-dimethyl-1,3-diazolidine

Bis(NBH(3)), bis(NBF(3)), and NBF(3)/NBH(3) adducts 1-3 were prepared from 1,3-dimethyl-1,3-diazolidine and characterized by the (1)H, (13)C, (11)B, (19)F, 2D (1)H(-13)C HETCOR and NOESY NMR spectra. The structures and conformations of the adducts were established by the variable-temperature (1)H NMR spectra, the X-ray diffraction method (adduct 2A), and density functional calculations at different theoretical levels. The experimental and theoretical data have revealed that bis adducts 1-3 prefer trans orientations of the borane groups (1A, 2A, 3A) in solution, the solid state, and the gas phase. The studies have shown that the energetic preference of trans adducts with respect to cis compounds, decreasing as 2A (2.9 kcal/mol) > 3A (2.7 kcal/mol) > 1A (1.4 kcal/mol), is dictated by spatially repulsive interactions between the CH(3), BH(3), and BF(3) groups. The results of DFT calculations agree well with an experimental trans/cis isomeric ratio of 9:1 determined in solutions of adduct 1. The calculated geometry and energy, as well as the topological analysis of electronic densities, show that trans adducts 1-3 should exist in gas phase as twist conformations T-2 stabilized by the intramolecular C-H(delta+)...(-delta)H-B or C-H(delta+)...(-delta)F-B interactions. These interactions are characterized as closed-shell. The energy of one proton-hydride and proton-fluoride intramolecular contact, estimated as 1.9 (1A-T-2) and 0.7 (2A-T-2) kcal/mol, respectively, classifies the "elongated" intramolecular interactions CH(delta+)...(-delta)HB and CH(delta+)...(-delta)FB as weak ones. It has been established that, on going from gas phase to a condensed phase (solution and solid), the twist-conformations T-2 transform to conformations T-1, probably by intermolecular dipole-dipole interactions. The data presented in this work show that despite a weakness of the "elongated" proton-hydride and proton-fluoride interactions, they can play a significant role in the stabilization of conformational molecular states, especially when cooperativity is in action.     

Spectroscopic Studies on the Interaction of Tetramethylpyridylporphyrins and Cationic Clays

In the present work, the interaction between5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) and its metallated form(CoTMPyP) with three cationic clays was investigatedby X-ray diffraction (XRD), UV-VIS and resonance Ramanspectroscopies. Sodium montmorillonites K10 and KSFand a synthetic fluorohectorite (FHT) containingdifferent macrocycle loadings, were prepared by an ionexchange reaction. In nonsaturated KSF and FHT, theCoTMPyP molecule assumes a flat orientation, relativeto the host layers, giving rise to at least twoabsorption bands in the Soret region (ca. 445 and 465 nm)assigned to adsorbed and intercalated CoTMPyP,respectively. For the delaminated K10 sample, a broadband centered around 456 nm, indicates a majorcontribution from the metalloporphyrin on the clayexternal surfaces. The electronic spectra of FHTsamples containing increasing amounts of CoTMPyPshow bands red shifted even when a small amount ofporphyrin is used, suggesting that the electroniclevels of the macrocycle are more affected by theinteraction with the clay than by the metalloporphyrindistortion inside the galleries. The resonance Ramanspectra obtained for all CoTMPyP samples presentedonly minor shifts in peak positions and band width,with the exception of the FHT saturated sample, wherethe bands are clearly broader when compared to otherloadings, suggesting that porphyrin aggregation isoccurring. In the case of TMPyP, the bands at ca. 430and 468 nm were assigned to nonprotonated andprotonated molecules, respectively. This assignment issupported by resonance Raman spectroscopy, which alsoshowed the ₂ mode (ca. 1550 cm^-1) to bethe most sensitive peak to protonation.     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Sandwich structures at oil-water interfaces under alkaline conditions

Equilibrium liquid crystal (LC) layer on an interface between crude oils and water was observed at high pH. This layer is composed mainly of sodium naphthenates produced in situ at the water/oil interface. Transient LC layer was also evolved at the interface of aqueous phase of sodium hydroxide solutions and oleic phase of naphthenic acid (NA) solutions as result of a chemical reaction between NaOH and NA. This chemical reaction causes transport process resulting in a disturbance of the interface. Optical observation of this interface disturbance reviled that the interface covered with LC shows considerably lower flexibility as compared to LC free interface. The LC layer eventually dissolves in the water phase at low oil-to-water ratio, while at high oil-to-water ratio it can form an equilibrium phase, which spreads spontaneously at the oil-water interface.     

Effect of hydration of polyamide membranes on the surface electrokinetic parameters: surface characterization by x-ray photoelectronic spectroscopy and atomic force microscopy

The surface and the solid/liquid interface of two polyamide membranes, one experimental (B0) and one commercial (NF45), have been characterized by X-ray photoelectronic spectroscopy (XPS), atomic force microscopy (AFM), and zeta potential, respectively. The surface roughness, determined by AFM data analysis, is different for the two membranes, and results show that the commercial NF45 membrane presents a much lower roughness than the experimental B0 membrane. XPS data indicate that the surface of membrane NF45 is similar to that of pure polyamide, while membrane B0 contains a considerable amount of impurities. The homogeneity in depth of both membranes was also studied by determining the composition profile at different analysis angles. Streaming potential along the membrane surface or tangential streaming potential (TSP) measurements with NaCl solutions at different concentrations were carried out with both membranes to determine the zeta potential and the electrokinetic surface charge density, and a correlation between membrane surface and interface parameters is made. Some differences in atomic concentrations of membrane surface elements and X-ray photoelectronic spectra of the samples used in TSP measurements and after a drying process at 90 degrees C for 24 h can be observed when they are compared with those for fresh membranes. Electrokinetic parameters for membrane NF45 (TSP, zeta potential, and surface electrokinetic charge density) obtained from three different series of measurements strongly decrease as a result of membrane use, but for membrane B0 they are practically independent of the number of measurements. This difference in the electrokinetic behavior of the two membranes has been related to the hydration process of the surface for each sample studied by XPS and AFM.     

The Mitsunobu Inversion Reaction of Sterically Hindered 17-Hydroxy Steroids

The Mitsunobu inversion reaction of 3-methoxyestra-1,3,5(10)-trien-17-ol is dramatically influenced by the acidic component. There appears to be a relationship between the dissociation constant of the electron-withdrawing substituent on the aryl acid and the overall effectiveness of the reaction, with more acidic species generally providing a higher yield of inverted product.     

Thermodynamic parameters for the molecular inclusion reaction of dulcin with beta-cyclodextrin. spectrofluorimetric determination of dulcin

The inclusion of dulcin in alpha- and beta-cyclodextrin has been studied by fluorescence spectroscopy. To quantitatively describe complex formation between the beta-cyclodextrin and dulcin, an association constant of 290 M(-1) at 21 degrees was obtained. The thermodynamics associated with the complex formation between dulcin and beta-cyclodextrin in aqueous solution has been studied. The obtained value of DeltaG(0) = -13.7 kJ/mole at 21 degrees , together with DeltaH(0) = -33.6 +/- 2.3 kJ/mole and DeltaS(0) = -67.2 +/-8.3 Jmole(-1) K(-1) indicate that dulcin has a very marked tendency to associate with beta-cyclodextrin in water. The inclusion complex of dulcin in beta-cyclodextrin has been used to determine dulein in the range 0.13-5 mug/ml the method has been applied to determine dulcin in soft drinks.     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.     

Controlled-Rate Thermal Desorptton

A new way of conducting thermal desorption experiments is described. The method consists in maintaining the desorption rate constant by a rigorous control of temperature. The equations for two models of constant rate desorption are described: from a surface with only one type of adsorption site, and with two different types. The technique is applied to two real systems and the kinetic parameters are determined. The results are compared with those obtained by using TPD. The main advantages are discussed and the methodology and modifications required for a TPD set-up to work at a constant desorption rate are described.