Impedance studies of porous lanthanum-phosphate-bonded nickel electrodes in concentrated sodium hydroxide solution

The hydrogen evolution reaction (HER) was investigated on a lanthanum-phosphate-bonded nickel (LPBN) powder electrode in 30 wt.% NaOH at 70°C using ac impedance and steady-state polarization techniques. Circuits containing one or two constant-phase elements (CPEs) in parallel with a resistance and corresponding to fractal and porous electrode models were tested in order to interpret the ac impedance data. The experimental impedance spectra were well described by the porous electrode model and the circuit containing two CPEs. The results obtained from the ac impedance and steady-state measurements allowed the mechanism and kinetics of the HER to be evaluated. Comparison of these parameters with those obtained on the polycrystalline nickel electrode in 1 M alkaline solution at 25°C indicates that an increase in activity is principally due to an increase in the real surface area.     

Liquid chromatography particle beam-mass spectrometry with massive cluster impact

A new liquid chromatography-mass spectrometry technique is described that utilizes a particle beam interface to transport and deposit desolvated analyte molecules onto a target surface that is bombarded by a primary beam of massive multiply charged glycerol cluster ions to generate secondary ions for mass analysis. The massive cluster ion beam is generated by electrohydrodynamic emission from a solution of 1. 5-M ammonium acetate in glycerol. In the present instrumental configuration the massive cluster ion gun is placed above the target probe and the particle beam interface is connected through a side port of the mass spectrometer. The massive cluster ion beam and particle beam are intercepted by a target surface substituted for a conventional ion volume. The target surface is positioned such that it is ～ 45 ° to the primary cluster ion beam, the particle beam, and the mass analyzer axis. This geometric orientation represents a compromise among the performances of these three elements. The feasibility of this liquid chromatography-particle beam on-line with massive cluster impact is demonstrated by flow injections of acetylcholine chloride and gramicidin S. Spectra generated from this preliminary study indicate promise for routine liquid chromatography-mass spectrometry of polar compounds by using a robust inlet and an effective generation of secondary ions without an added matrix.     

Kinetics of thermal decomposition of Co3O4 powder and single crystals

Kinetics of thermal decomposition in vacuum of Co₃O₄ powder as well as single crystals has been investigated. Discrepancies with the results of previous authors have been discussed. Decomposition of Co₃O₄ proceeds through formation of a compact layer of CoO and hence diffusion is the rate-limiting factor. The experimental curves α(t) be described for 0.05 < α < 0.85 using a modified Ginstling-Brounshtein equation: 1 ? 2α/3 ? (1 ? α)^2/3 = ktⁿ where the activation energy varies with the degree of decomposition.     

Synthesis of tricyclic phospholene oxides by cycloaddition of phosphorus halides with heterocyclic analogs of 1-vinyl-3,4-dihydronaphthalenes

Replacement of C-4 with a hetero substituent (NR,O,S) in the 1-vinyl-3,4-dihydronaphthalene system has provided a new type of diene for participation in the McCormack cycloaddition reaction with P(III) halides. The tricyclic phospholene oxides so obtained are the first to bear an additional heteroatom in the ring system. 1,2-Dihydro-7-methoxy-1-(p-toluenesulfonyl)-4-vinylquinoline is a stable solid that reacts with methylphosphonous dichloride to give, after hydrolysis of the cycloadduct, the 1,2,4,5-tetrahydro-1H-phospholo-[2,3-c]quinoline ring system. The dihydroquinoline moiety was aromatized by detosylation with potassium t-butoxide. The tendency of 4-vinyl-2H-benzopyran to dimerize was a serious complication in its use, and the cycloaddition with methylphosphonous dichloride proceeded only in low yield. The product, a 2,3,3a,4-tetra-hydrobenzo[3,2-d]pyran derivative, was a stable, easily purified and characterized substance. 4-Vinyl-2H-benzo[b]thiopyran was more stable than the pyran, but the phospholo derivative from reaction with methylphosphonous dichloride was more difficult to purify. All products were characterized by ¹³C-nmr spectroscopy.     

Diamond and diamond-like carbon from a preceramic polymer

The synthesis of poly(hydridocarbyne), one of a class of carbon-based random network polymers and a structural isomer of polyacetlyene, is reported. The network backbone of this polymer is primarily composed of tetrahedrally hybridized carbon atoms, each bearing one hydride substituent and linked via three carbon-carbon single bonds into a three-dimensional random network of fused rings. This atomic-level carbon network backbone confers unusual properties on the polymer, including facile thermal decomposition to form diamond or diamond-like carbon high-quality films at atmospheric pressure, by direct deposition or by chemical vapor deposition (CVD), without the use of hydrogen or any other reagent.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Effect of conformational changes on a one-electron reduction process: evidence of a one-electron P-P bond formation in a bis(phosphinine)

EPR spectra show that one-electron reduction of bis(3-phenyl-6,6-(trimethylsilyl)phosphinine-2-yl)dimethylsilane (1) on an alkali mirror leads to a radical anion that is localized on a single phosphinine ring, whereas the radical anion formed from the same reaction in the presence of cryptand or from an electron transfer with sodium naphthalenide is delocalized on the two phosphinine rings. Density functional theory (DFT) calculations show that in the last species the unpaired electron is mainly confined in a loose P-P bond (3.479 A), which results from the overlap of two phosphorus p orbitals. In contrast, as attested by X-ray spectroscopy, the P-P distance in neutral 1 is large (5.8 A). As shown by crystal structure analysis, addition of a second electron leads to the formation of a classical P-P single bond (P-P 2.389 A). Spectral modifications induced by the presence of cryptand or by a change in the reaction temperature are consistent with the formation of a tight ion pair that stabilizes the radical structure localized on a single phosphinine ring. It is suggested that the structure of this pair hinders internal rotation around the C-Si bonds and prevents 1 from adopting a conformation that shortens the intramolecular P-P distance. The ability of the phosphinine radical anion to reversibly form weak P-P bonds with neutral phosphinines in the absence of steric hindrance is confirmed by EPR spectra obtained for 2,6-bis(trimethylsilyl)-3-phenylphosphinine (2). Moreover, as shown by NMR spectroscopy, in this system, which contains only one phosphinine ring, further reduction leads to an intermolecular reaction with the formation of a classical P-P bond.     

Diethyl benzoylphosphonate as a ligand

Summary Complexes (2 : 1) of diethyl benzoylphosphonate (debp) with 3d metal perchlorates were synthesized and characterized by means of i.r. and electronic spectral, magnetic susceptibility and conductance measurements. In new complexes of the types [M(debp)₂(OClO₃)(OH₂)](ClO₄) (M = Fe, Co, Zn) and [Fe(debp)₂(OClO₃)(OH₂)](ClO₄)₂, both debp ligands function as bidentate chelating agents, coordinating through the P=O and C=O oxygens. In contrast, in the manganese(II) and nickel(II) complexes, which are of the [M(debp)₂(OClO₃)(OH₂)₂](ClO₄) type, one debp acts as a bidentate chelating ligand, while the second debp is unidentate, coordinating only through the P=O oxygen. Hexacoordination in the new cationic complexes is completed by coordination of aqua and unidentate perchlorato ligands, which are in competition for sites in the inner coordination sphere of the central metal ion with the weak debp ligand. On the other hand, debp, owing to its bulkiness, and especially the presence of the benzoyl substituent, introduces sufficiently severe steric hindrance during coordination. As a result of this, the formation of [M(debp)₃]ⁿ⁺ tris-chelate cationic complexes with the 3 d metal ions under study does not seem to be possible.     

Generation of Ethyl Metathiophosphate by Thermal Fragmentation of O-Ethyl N-Substituted Phosphoramidothioates

O-Ethyl N-1-adamantylphosphoramidothioate was synthesized and found to fragment on heating in inert solvents to form the pyrophosphate AdNHP(S)(OEt)OP(S)(OEt)OH. The proposed mechanism involves an elimination of the amine portion with release of ethyl metathiophosphate (EtOP(S)O), as was confirmed in previous work for the comparable structure with oxygen. This transient compound then phosphorylates the starting phosphoramidothioate. O-Ethyl N,N-diethylphosphoramidothioate was also synthesized, and while it gave a similar pyro compound on heating, the reaction mixture was more complex. Both phosphoramidothioates, however, served effectively as thiophosphorylating agents toward alcohols, a silanol, and the silanol groups on the surface of silica gel. Exploratory experiments showed that these phosphoramidothioates also could thiophosphorylate the OH group of a monoester of phosphoric acid, as well as that of phosphinic acids, forming anhydrides with the partial structure