Chaotic micromixers using two-layer crossing channels to exhibit fast mixing at low Reynolds numbers

We report two chaotic micromixers that exhibit fast mixing at low Reynolds numbers in this paper. Passive mixers usually use the channel geometry to stir the fluids, and many previously reported designs rely on inertial effects which are only available at moderate Re. In this paper, we propose two chaotic micromixers using two-layer crossing channels. Both numerical and experimental studies show that the mixers are very efficient for fluid manipulation at low Reynolds numbers, such as stretching and splitting, folding and recombination, through which chaotic advection can be generated and the mixing is significantly promoted. More importantly, the generation of chaotic advection does not rely on the fluid inertial forces, so the mixers work well at very low Re. The mixers are benchmarked against a three-dimensional serpentine mixer. Results show that the latter is inefficient at Re = 0.2, while the new design exhibits rapid mixing at Re = 0.2 and at Re of O(10(-2)). The new mixer design will benefit various microfluidic systems.     

Kinetic and mechanistic studies of the reaction of a range of bases and metal-hydroxo complexes with the phosphonate ester 2,4-dinitrophenyl ethyl methylphosphonate in aqueous solution

The base hydrolysis and spontaneous water hydrolysis of the phosphonate ester 2,4-dinitrophenyl ethyl methylphosphonate (DNPEMP) has been studied in detail and the activation parameters for these processes determined. The catalytic effect of a series of 19 oxygen and nitrogen bases and metal hydroxo complexes has been studied. The Brønsted plot of pK versus logkN has a slope (β) of 0.47, which is fairly typical for phosphate and phosphonate esters. alpha-Effect nucleophiles such as 2-iodosobenzoate, hypochlorite and the hydroperoxide ion (HO-2) exhibit enhanced reactivity, as does fluoride ion and the bifunctional metal complex [Cu(tmen) (OH2)(OH)]+ (tmen = N,N,N',N',-tetramethylethylenediamine). Reactions involving these species appear to take place by a nucleophilic pathway, while the other oxygen and nitrogen bases act as general base catalysts. The solvent deuterium isotope effect for Et3N catalysis, kH2O/kD2O=1.3, is consistent with general base catalysis. The mechanisms of these reactions are discussed in detail.     

On the interaction of UV screens with the lignocellulosic matrix

In this report, we describe our attempt to understand the photochemical interactions that occur between dihydroxybenzophenone (DHB)-based UV screens and lignin when high-yield pulps are treated with such materials. Milled wood lignin (MWL) and filter paper were used as models, and various irradiation protocols were carried out in the presence and absence of UV screens. After irradiation, the lignin and the UV screen were extracted and the products analyzed. These experiments showed that upon irradiation, fragments of MWL-containing chromophores were linked to cellulose via an acid-labile linkage. In the presence of UV screens, these reactions were minimized. Molecular weight measurements of the extracted lignin showed that the MWL is degraded upon solid-state irradiation. The samples that contained UV screens showed a reduced tendency to degrade. Using quantitative 31P NMR, it was possible to probe further the detailed structural changes that occurred in MWL during irradiation. In general, DHB-based UV screens and derivatives were found to interact actively with MWL when irradiated.     

Synthesis and characterization of Mn2P2S6 single-crystal nanorods and nanotubes

Mn2P2S6 single-crystal nanorods with diameters 20-40 nm and lengths up to 1 microm and nanotubes with diameters 40-50 nm and lengths ranging between 110 and 170 nm have been prepared through a low-temperature solvothermal method. They have been characterized by X-ray diffraction, transmission electron microscopy (TEM), high-resolution (HR) TEM, electron diffraction, energy-dispersive spectrometry analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy.     

A new isoprenyl phenyl ether compound from mangrove fungus

A new isoprenyl phenyl ether, 3-hydroxy-4-(3-methylbut-2-enyloxy)benzoic acid methyl ester (1), together with 4-hydroxybenzoic acid (2), 2-hydroxy-6-methylbenzoic acid (3), and 4-hydroxy-3-methoxybenzoic acid (4) were isolated from Mangrove fungus (No. B60) from the South China Sea. The structures of the compounds were established on the basis of NMR spectroscopic and mass spectrometric data. In the preliminary bioassay, compound 1 exhibited antibacterial and antifungal activities. Compound 1 also inhibited cytotoxicity to the hepG2 cell line with an IC₅₀ value of 10.0 μg/mL. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 313–314, July–August, 2007.     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

A direct quantitative analysis method for monitoring biogenic volatile organic compounds released from leaves of Pelargonium hortorum in situ

A direct quantitative method is presented that is based upon the use of multiple headspace solid phase microextraction (HS-SPME) to monitor biogenic volatile organic compounds (BVOCs) released from a living leaf of Pelargonium hortorum in situ. Seventeen BVOCs were detected by GC-MS after a single SPME extraction using a CAR/DVB/PDMS fibre. An internal standard was employed to determine the absolute amounts of seven terpenoid compounds released from a P. hortorum leaf. The quantitative analysis was performed over two days, with extraction preformed for 20 min every 3 h. The amount of volatiles extracted varied with the time of day, with two maxima recorded at 14:00 (day 1) and 17:00 (day 2), corresponding to 236 and 277 ng of the seven terpenoids recorded, respectively. These results indicate that multiple HS-SPME in combination with an internal standard is a simple, quick, and quantitative technique for analysising BVOC emissions from a live plant sample.     

Thermoresponsive nanostructures by self-assembly of a poly(N-isopropylacrylamide)-lipid conjugate

The synthesis and purification of a poly(N-isopropylacrylamide)-lipid conjugate and its use in the preparation of a thermoresponsive lipid mesophase is described. Specifically, poly(N-isopropylacrylamide) with a single carboxyl group at one end was activated with dicyclohexylcarbodiimide/N-hydroxysuccinimide to form an active ester. This N-hydroxysuccinimide ester was then used to form a dimyristoyl-sn-glycero-3-phosphoethanolamine conjugate with poly(N-isopropylacrylamide) via an amide bond, rendering the conjugate amphiphilic. Quaternary phases comprising the conjugate, a phosopholipid, dimyristoylphosphatidylcholine, and a cosurfactant, N,N-dimethyldodecylamine-N-oxide, dispersed in water were found to self-assemble at room temperature to form liquid crystalline gels, adopting an expanded lamellar structure. A modest increase in temperature triggered the reversible conversion of the aggregate to a collapsed lamellar structure, while a modest reduction in temperature resulted in its conversion to a nonlamellar phase. The phases were characterized by polarized optical microscopy and small-angle X-ray scattering (SAXS).     

Chirality control in optically active polysilane aggregates

A novel strategy for controlling the higher order chirality of aggregates prepared from enantiopure polysilanes is experimentally probed and discussed. Structurally similar poly[n-alkyl(aryl)]silanes were synthesized in which one side chain comprised the chiral (S)-2-methylbutyl group and the other an achiral m- or p-alkyl-substituted phenyl ring. In solution the polymers adopt helical conformations with the same induced preferential screw sense chirality, as evidenced by circular dichroism (CD) spectroscopy. Aggregates, however, formed by addition of a nonsolvent to a polymer solution, show oppositely signed CD spectra. Consistent results were obtained for another series of poly[p-n-alkyl(aryl)]silanes where alkyl is butyl, propyl, and ethyl. The sense of the aggregate higher order chirality is dependent on the chemical composition and environment and is coarse-tunable by adjusting the length of the achiral side chain and fine-tunable by adjusting the good/poor solvent ratio. The origin of these effects is discussed with reference to a simple model.