Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

Phase transitions and metastable states in TlGaSe2

The results of measurements of the dielectric constant of TlGaSe₂ in temperature range of successive phase transitions are presented. An anomaly in the temperature dependence of the real part of dielectric constant in TlGaSe₂ has been observed at about 242?K in addition to anomalies at 115, 108, and also near 65?K as reported in previous publications. The presence of temperature hysteresis effects in temperature interval between 115 and 242?K allowed making a conclusion about possible existence of an incommensurate phase in the mentioned temperature range. A model of succession of the structural phase transitions in TlGaSe₂ has been suggested.     

Scalable synthesis of palladium nanoparticle catalysts by atomic layer deposition

Potential applications in drug delivery from nanostructures composed of two oppositely charged polymethacrylates, eudragit^? L100 (EL) and eudragit^? EPO (EE), loaded with three model basic drugs (D), atenolol, propranolol, and metroclopramide were evaluated. The self-organized nanoparticles based on drug-interpolyelectrolyte complexes (DIPEC), (EL-D₅₀)?CEE_X, were obtained by mixing the aqueous dispersions of both polyelectrolytes at room temperature in an ultrasound bath. Dispersions of (EL-D₅₀) neutralized with increasing proportions of EE exhibited a rise of turbidity, particle sizes in the range of 150?C400?nm, and high negative zeta potential. The sign of zeta potential was shifted from negative to positive by changes in composition of DIPEC. Freeze dried DIPEC were easily redispersed in water yielding nearly the same parameters of fresh dispersions. In vitro release experiments using Franz cells showed that DIPEC systems behave as a drug reservoir that slowly releases the drug as water is placed in the receptor compartment. The release rate was raised by ionic exchange with counterions present in simulated physiological fluids placed in the receptor media. Delivery of D from DIPEC exhibited a remarkable robustness toward simulated physiological media of different pH. The DIPEC systems exhibit interesting properties to design nanoparticulate drug delivery systems for oral and/or topical routes.     

Efficient Detection of Phthalate Esters in Human Saliva via Fluorescence Spectroscopy

The detection of phthalates in human biologic fluids remains an important research objective because it provides an important measure of an individual’s exposure to this class of compounds, which have known deleterious health effects. Moreover, the ability to accomplish such detection in fluids that are easy to collect, such as saliva and urine, provides additional practical advantages. Reported herein is the application of cyclodextrin-promoted fluorescence energy transfer and fluorescence modulation to accomplish precisely such detection: the development of sensitive and selective florescence-based detection methods for phthalates in saliva, an easily collectable human biologic fluid. Such saliva-based detection methods occur with high levels of selectivity (100% differentiation) and sensitivity (limits of detection as low as 0.089?µM), and provide significant potential in the development of practical phthalate detection devices.     

SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.